Safety Engineering Expert Witnesses: 18

Dr. C.J. Abraham, P.E. is a Licensed Professional Safety Engineer with over thirty five years of international experience consulting to insurance companies, municipalities, government agencies, and the legal profession. He provides consultation to International corporations in the areas of New Product Development, Manufacturing, Packaging, Warnings and Instructions. 

Dr Abraham's services include Expert Witness Testimony for both Plaintiff and Defense in matters involving Personal Injury and Product Liability. 

Areas of Expertise:

Construction Accidents OSHA ADA Labor Law Human Factors Household / Industrial Products Safety Engineering

Retail Store Safety Industrial Hygiene Textiles Fires / Explosions / Flammable Fabrics Slips / Falls Recreational / Sports Accidents Toxic Exposures

Dr. Adam K. Aleksander, PhD, PE, CSP, has over 40 years of experience in the areas of Mechanical Engineering, Human Factors, and Safety Engineering. He combines both academic credentials and active work in industry to provide a grounded perspective in Product Liability, Industrial Incidents, Warnings, and OSHA related issues. He is also a VP of an Energy Services firm, with over 35 overseas assignments related to forensic services, power utility issues, and equipment failures.

Dr. Aleksander has been a practicing engineer since 1972, focusing his Manufacturing, Consulting and Forensic investigations on Problem Definition and Root Cause Analysis of complex problems in confidential issues. His firm has experience encompassing an enormous variety of claims, from large $45 million dollar dam claims, to environmental clean-up claims, to small road construction claims. His litigation services often involve reconstruction, perception reaction studies, warnings, equipment operation, mechanical failures, industrial accidents, skiing, and bicycling injuries.

As an Expert Witness, Dr. Aleksander has worked with many clients, including plaintiff's and defendant's attorneys, both civil and criminal, attorneys representing corporations, corporations in the power utility area, and corporations that produce products. His services are also available to insurance executives with complex claims issues that involve industrial or utility related losses. Dr. Aleksander has been retained over 125 times in a wide range of technical investigations.

Litigation Expertise:

• Product Liability - Design, Manufacturing and Marketing Defects, Involving Damage, Injury or Fatality
• Equipment Failures - Proximal Cause of Failure with Contributing Factors
• Human Factors, Visibility, Ergonomics, and General Research Issues - Product Usability, Warnings, Instructions, Perception, Reaction Time, Visibility and Conspicuity Issues
• Construction, OSHA, and Safety Engineering - Regulatory and Safety Issues
• Industrial Projects
• Power Utility - Service and Equipment Failures

View Dr. Aleksander's Consulting Profile.

David Smith is an experienced mechanical engineer (MS, PE) with seven issued patents. Award-winning inventor. Vice President of Alpine Engineering and Design, a mechanical engineering consulting company with clients around the United States ranging from individual inventors to Fortune 500 companies. Worked on the development of multiple successful products including among other things: aerial lifts, garbage trucks, thrill rides, ziplines, trailers, oil and gas equipment, exercise equipment, manufacturing equipment, and multiple consumer products. 

Graduated Cum Laude with a bachelor's degree in mechanical engineering. Completed a master's of science degree in mechanical engineering and an MBA with an emphasis in product development. Licensed professional engineer (PE) and certified safety professional in comprehensive practice (CSP). Certified trainer for boom lifts, scissor lifts, rough terrain, and counterbalanced forklifts. Over 10 years of experience in product development, patents, equipment safety, and risk assessments. 

Experienced expert witness having drafted over 200 reports/declarations in patent cases and catastrophic injury and death cases. Designed and built multiple custom testing devices to obtain data and evaluate opinions. Created multiple demonstratives to explain the mechanics and circumstances of accident sequences and patented devices. Testified in deposition 11 times and in trial once.

Expert Witness Services Professional Expert Reports Testing Forensic/Failure Analysis Accident Reconstruction Demonstratives Inspections/Measurements Compliance with Standards Expert Testimony Patent & Patent Related Issues Patent Searches Provisional Patent Complete with Illustrations Patent Infringement Review

Product Development Innovative Concept Multi-Industry Experience Powerful Design Tools Full Service Fabricating Materials Design Analysis Finite Element Analysis (FEA) Hydraulics, Pneumatics, Electrical Structural Integrity Tests Value Analysis

Thomas H. Burtness, PE, is an Electrical Engineer specializing in both Electrical and Building Construction - equipment selection, specification, and installation (actually “working with the tools”), as well as cost control techniques.

Background - Mr. Burtness has 40+ years of experience in the design, specification, construction contract administration, installation, startup, and troubleshooting of electrical power, on-site generation, distribution, control, and instrumentation systems and equipment for residential, commercial, industrial, and municipal occupancies. His experience also includes water, wastewater, and stormwater treatment plants, and military facilities.

Additional expertise includes Illumination Engineering for street, roadway, and area lighting including photometric footcandle requirements, calculations, field verification, equipment specifications, installation, and analysis of failure, glare, overlighting and underlighting.

Litigation Support - Since, 1981, Mr. Burtness has been providing forensic electrical engineering services to insurance companies and attorneys including accident and failure investigations, determination of cause and origin, litigation support, expert opinions, reports, and testimony. His services are available nationwide, with PE registration by comity available in most states.

Cases Involve:

Industrial Accidents Electrocution Personal Injury Fire Equipment and Machinery Failure

Failure of Safety Circuitry Grounding Lightning Damage and Fire Construction Defects / Contract Claims Design and Specification Disputes

View Thomas Burtness' Consulting Profile.

Anthony S. Boom is an Electrical Engineer and Escalator Controls Expert Witness with over 35 years in the escalator business. Currently providing expert witness services though Cetek, Inc., he spent the last three decades working as an Electrical Engineer with Montgomery Escalator and KONE R&D, escalator division.

Three patents Mr. Boom received while working at Montgomery and at KONE include one for Safety Switch and Method of Checked Redundancy, utilized in all of the current transit escalator safety circuits; an Apparatus and Method for Variable Torque Braking of Escalator and Moving Walkways; and a Method and Conveyor System for KONE Sleep Mode Controller.

Litigation Support - Mr. Boom offers expert witness services to attorneys representing plaintiff and defense. Services include expert witness testimony, written or oral affidavits, site inspections, technical investigations, technical review documentation, etc. 

Areas of Expertise:

Electrical Engineering Escalators Vertical Transportation Electrical Controls Escalator Control Circuitry Logic Escalator PLC Control Software Program Logic

Escalator Brake Control Escalator Braking Systems Escalator Safety Escalator Safety Circuits Moving Walkways National Electrical Code

Background Experience and Accomplishments:

• Designed and developed many custom escalator electrical controls. He also designed and wrote the code for Montgomery Escalator and KONE escalator controls, including the controls for the Trans 180 escalator platform (the ES373’s model).
• Developed diagnostic guides for escalator controllers and braking systems and technical bulletins for all aspects of the escalator electrical control system.
• Oversaw the CSA certification of the escalator control and brake systems.
• Supervised and trained electrical and mechanical engineers.
• Provided tech support to KONE personnel regarding Otis controls and performed power studies on a variety of Otis escalators. 

Selected Case Experience:

• 2022: Escalator at department store, PA: Alleged injury on escalator.
• 2023: High rise transit escalator, NY: Ongoing.
• 2023: Public transportation escalator, NY: Ongoing.  See CV for Full List

H. Landis “Lanny” Floyd II, PE, CSP, CMRP, CRL, CESCP, Life Fellow IEEE, has over 45 years of experience in Electrical Safety in the Workplace. His work has advanced the application of Human Factors Engineering, Electrical Technology, and Safety Management Systems in preventing occupational electrical injuries. Mr. Floyd retired from DuPont in 2014, holding the positions of Principal Consultant - Electrical Safety & Technology, and Global Electrical Safety Competency Leader. 

Click here for my current CV

Background Experience - For the past 35 years, Mr. Floyd focused on electrical safety in the construction, operation, and maintenance of industrial and commercial facilities worldwide for DuPont. This included safety management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance. From 1992 to 2014, he led the team that designed and facilitated implementation of a strategy for continuous and sustainable improvement in occupational electrical safety for DuPont Global Operations. This work enabled breakthrough performance in prevention of serious injuries and fatalities from electrical energy in DuPont facilities worldwide. In 2013, Mr. Floyd was invited to join the faculty at the University of Alabama at Birmingham, where he teaches in the Advanced Safety Engineering and Management Master of Engineering degree program. 

Litigation Support - Mr. Floyd has been providing expert witness services and litigation support for over 10 years. His expertise is available to counsel representing both plaintiff and defendant. Mr. Floyd's services include consulting, site inspections, testing, reports, depositions, and trial testimony when necessary. 

Areas of Expertise:

Workplace Electrical Safety Electrical Shock Arc Flash Electrical Safety Management Systems Electrical Codes and Standards NFPA70E & National Electrical Safety Code National Electrical Code Electrical Testing Instruments

Electrical Injury Electrocution Electrical Reliability Electrical Maintenance Electrical Construction Occupational Electrical Safety Electric Power Systems Overhead Power Lines

View Lanny Floyd's Consulting Profile.

• Over 35 years of experience in Mechanical / Structural Engineering & Design, Failure Analysis, Product Liability, Industural Asbestos,Pressure Vessel & Boiler analysis and evaluation of mechanical and structural components.
• Extensive trial experience. Has been involved in multi-million dollar cases. Areas involved included:

  
  

  - Piping & pipe supports - Structural failure of products - Failure analysis - Industrial asbestos - Seismic analysis - Fire protection - Pressure vessels

  - Tanks - Construction - Heat transfer analysis - Environmental qualification of equipment - Welding - Product design - Patent information

• Expertise in developing litigation rate-case exhibits and detailed supporting testimony, and in organizing case documentation into easy-to-use computer databases for trial use.

Eugene R. Camerota is a Professional Consulting Engineer. His consulting experience includes the analytical and experimental studies of Engineering problems dealing with Accident Reconstruction and Product Liability. His work includes the following specialties:

Automotive / Motorcycle Accident Reconstruction

Crash Data Retrieval

Seat Belt Restraint Analysis

Automotive Component Design Evaluation

Construction Equipment

Industrial / Portable Machinery

Consumer Product Evaluation

OSHA

Slip and Fall

D.R. Foster, PE, PhD is an expert in Welding Engineering, specializing in the Design, Manufacture, and Inspection of Welded Structures.  Dr. Foster possesses a PhD in Welding Engineering and numerous certifications in welding, inspection, and engineering.  In addition, he has significant Welding Engineering experience in both academia and in industry. His exceptional experience and training have prepared him to properly analyze the welding failures and welding safety violations that are the subject of Litigation.

Areas of Expertise:

Welding Engineering Welding Failure Analysis Welding Forensics Welding Corrosion Welding Explosions Welding Fires Welding Safety / Code Compliance Review of Weld Procedures and Qualifications

Industrial Safety Welding Personal Injury Welding Design Welding Inspection Welding Metallurgy Welding Intellectual Property (Welding IP) Welding Patents Additive Manufacturing / 3D Printed Structures

Background Experience: Dr. Foster earned his BS, MS, and PhD in Welding Engineering from The Ohio State University’s Department of Material Science and Engineering.  Dr. Foster has spent over 17 years as a welding engineer in the academic, public, and private sectors. 

Strongly dedicated to his craft, Dr. Foster has earned multiple welding, engineering, and inspection certifications. These certifications include Certified Welder (CW), Certified Welding Inspector (CWI), Certified Welding Educator (CWE), Certified Welding Supervisor (CWS), Certified Welding Engineer (CWEng),  NDT Level III Inspector (NDT III) and Licensed Professional Engineer (PE).

Dr. Foster has performed work for many large government agencies/consortiums such as Ohio Aerospace Institute, US Navy, US Army, NASA, the National Shipbuilding Research Program and the National Science Foundation while also providing welding engineering solutions for private industry.

Dr. Foster is a former tenure-track university professor with extensive experience teaching undergraduate-level and graduate-level courses in materials science, welding processes, and the design of welded structures. His research has been published in numerous scientific journals.

For more information, please visit The Welding Expert Witness.

Albert Ferrari, PE, CSP. is a Mechanical Engineer and Safety Professional experienced in both the micro and in the macro focus. Mr. Ferrari is particularly sensitive to reliability, safety, and function. His Forensic Engineering experience includes 30+ years in Accident Reconstruction, Causal Analysis, Failure Analysis, Codes, Standards and Regulations, Consulting and Testimony.

Mr. Ferrari provides Expert Witness Consulting and Testimony services to Defense attorneys, Plaintiff attorneys, Claims adjusters and Insurance companies. 

Engineering Work Includes:

• Automotive Engineering
• Pedestrian Facilities
• Machine Design
• Thermal and Mechanical Energy Analysis
• Structural Load and Stress Analysis
• Piping and Tanks
• System Safety and Human Factors Analysis for Design of Hazardous Equipment

Evaluations Include

• Cause of Injury, Loss and Damage
• Adequacy of Products, Systems, Materials, Practices
• Standard of Care of Design, Manufacturing, Use, Maintenance

Services Include:

• Investigation and Consultation
• Diagnostics, Testing and Analysis
• Technical Photography and Video
• Literature and Standards Studies
• Codes and Regulations Analysis
• Reports and Testimony
• Evaluations

Dr. Kevin A. Rider, PhD, PE, CPE of Forensic Human Factors, LLC., providing investigations and expert testimony regarding predictable human behavior, particularly as it relates to motor vehicle and pedestrian collisions, premises liability, and slips, trips and falls, the design and use of products, and adequacy of warnings/instructions. His work focuses on identifying the Human Factors Elements that lead to unfortunate incidents, and what should have been done to prevent them. 

Dr. Rider is a Licensed Professional Engineer and Certified Professional Ergonomist, and has studied human movements and behavior, and served as a human factors consultant since 1999, including five years teaching industrial engineering and occupational safety courses at West Virginia University. He has presented at professional conferences, both nationally and abroad, and his research is published and cited in a number of peer-reviewed journals. He continues to serve as a reviewer for conference and journal manuscripts. 

Dr. Rider has testified over 100 times, and excels at educating attorneys and jurors. His services are available to attorneys for both Plaintiff and Defense. 

Areas of Expertise:

• Driver Behavior - Cell Phone Use and other In-Vehicle Distractions
• Product Liability - Design, Guards, Warnings, Adequacy of Instructions
• Premises Liability - Sidewalks, Shopping Centers, Community Parks, Retail Displays
• Slips, Trips, and Falls
• Visibility and Lighting - Illumination and Conspicuity of Objects
• Workplace Safety - Defective Products, Gross Negligence or Misconduct, Third Party Actions on Worksites
• Machine Guarding 

.

Dr. Eric N. Brown, CIH, CSP, is a Certified Industrial Hygienist (CIH) and a Certified Safety Professional (CSP), with both certifications in good standing with the issuing boards. Dr. Brown holds a Doctorate in Public Health with an Industrial Hygiene specialization from the University of California at Los Angeles, and a Master’s degree in Public Health with an Occupational Health specialization from the Medical College of Ohio. He has over 20 years of experience in:

• Mold
• Health and Safety
• Industrial Hygiene
• Indoor Air Quality Exposure Assessments

Litigation Support - Dr. Brown has been a designated expert in hundreds of cases, been and has testified in both trials and arbitrations. His expertise has never been successfully challenged. His services are available to attorneys representing both plaintiff and defendant. 

Areas of Expertise:

Asbestos Bad Faith Construction Safety Environmental Ergonomics Hazardous Materials Human Factors Engineering

Industrial Hygiene & Mold Landlord / Tenant Lead Poisoning Occupational / Environmental Health OSHA Safety Wrongful Death

Florida Office:
Andrew Avalon, PE, PSP
Chairman & CEO
8633 Willow Kane Court
Orlando, FL 32835
aavalon@long-intl.com
T: (407) 445-0825     F: (407) 650-3399

---

Long International provides expert engineering and construction claims analysis, expert testimony, project management consulting, and insurance claims analysis services. We focus on projects in the following industries: building and construction; gas, gasification, GTL, LNG, and NGL; industrial and manufacturing; mineral and mineral processing; offshore oil and gas; oil sands; pipelines and utilities; power; refineries, petrochemical, and chemical; transportation; and water, wastewater, dams, and marine. We analyze claims, not limited to, disputed change orders, schedule delay, acceleration, time extensions, liquidated damages, loss of productivity, defective specifications, and deficient project management performance.

Richard J. Long, P.E., P.Eng., Founder of Long International, has over 50 years of U.S. and international consulting experience involving construction contract disputes analysis and resolution, arbitration/litigation support and expert testimony, project management, engineering/construction management, cost and schedule control, and process engineering. As an internationally recognized expert in the analysis and resolution of complex construction disputes for over 35 years, Mr. Long has served as the lead expert on over 300 projects having claims ranging in size from US$100,000 to over US$2 billion. He has presented and published numerous articles on claims analysis, entitlement issues, CPM schedule and damages analyses, cumulative impact claims, and claims prevention.

Rod C. Carter, CCP, PSP is President of Long International and has over 20 years of experience in construction project controls, contract disputes and resolution, negotiations, mediation, arbitration support, and expert testimony on scheduling, loss of productivity, and quantum issues.  He has experience in entitlement, schedule, and damages analyses on over 30 construction disputes ranging in value from US$100,000 to US$7 billion, related to oil and gas, oil refinery, LNG, heavy civil, nuclear, environmental, chemical, power, industrial, commercial, and residential construction projects. Mr. Carter specializes in loss of productivity, cumulative impact, and quantum calculations, and had a lead role in assessing damages on more than a dozen major disputes.  In addition, Mr. Carter has developed cost and schedule risk analysis models using Monte Carlo simulations to address the uncertainty of estimates and claims.

Scott M. Francis, P.E., PSP is a Vice President of Long International and has over 20 years of experience in project management, contract disputes analysis and resolution, CPM schedule preparation, execution, and analysis, productivity analysis, contract administration, design engineering, construction management, and government contracting.  He provides schedule development and assurance services, cost estimating, and claims analysis services on projects for both owners and contractors.  Specific responsibilities include CPM development and reviews, CPM schedule delay and acceleration analyses, change order impact analysis, issue identification, correlation of impacts to schedule activities, and productivity evaluations.

Dr. J. P. Purswell, PhD, PE, CPE has extensive experience in Human Factors, Ergonomics, and Safety Engineering. He holds a doctorate in Industrial & Systems Engineering from Virginia Tech. He has taught Safety Engineering and Ergonomics in the Industrial Engineering Department at CSU-Pueblo since 1999. 

A member of the Human Factors and Ergonomics Society and the American Industrial Hygiene Association, Dr. Purswell also served as the Chair of the Industrial Engineers PE exam from 2005 to 2009. He continues to serve on the committee which is responsible for the preparation of the national professional engineering examination in industrial engineering. 

Dr. Purswell is the author of more than 20 publications and presentations on Product Safety, Occupational Safety, Printed Warnings, and Auditory Warnings. Examples of products addressed include silica, asbestos, cleaning chemicals, gasoline containers, and recreational equipment. Dr. Purswell maintains NIST-calibrated equipment for the measurement of light, sound, force, and whole-body and hand-arm vibration in addition to standard photo and video equipment. 

Litigation Support - An Expert Witness in the legal industry since 1997, Dr. Purswell has been qualified as an expert in state and federal courts across the nation in safety engineering, including safety analysis techniques such as Fault Tree Analysis and FMEA as well as product warnings / instructions and OSHA compliance issues. His services include site inspections, document review, drafting Rule 26-compliant reports, deposition, and trial testimony. He has been retained by attorneys for both Plaintiff (40%) and Defense (60%) more than 100 times, has been deposed approximately 50 times, and has testified at trial over 20 times. 

Areas of Expertise:

Warning and Safety Instructions OSHA Compliance Chemical Accident Prevention Product Safety Lockout / Tagout & Machine Guarding Trucks and Forklift Accidents

Power Tools Safety Hazard Communication - Audible Alarms Employer Safety Training and Supervision Perception / Reaction Time Ergonomic Work Practices Working and Walking Surfaces - Slip, Trip and Fall

View Dr. Purswell's Consulting Profile.

Quality Forensic Engineering, LLC is a full-service forensic engineering firm, providing engineering support to clients in the areas of accident reconstruction, biomechanics, fire investigations, patent litigation analysis, premises liability, product liability, and tire failure analysis. We use the latest technology and industry proven techniques to provide thorough analysis and conclusions for the most difficult engineering questions. Our forensic engineers support clients throughout the U.S. Headquartered in Tallahassee, FL, we have locations in Jacksonville, FL; Melbourne, FL; Tampa, FL; Indianapolis, IN; New Orleans, LA; San Diego, CA; Charlotte, NC; Columbia, SC; and Tucson, AZ.

Dr. Brian Pfeifer, PhD, PE - Dr. Pfeifer is an Engineering Expert with over 25 years of experience investigating thousands of cases involving a variety of forensic engineering issues. He is a leading expert in accident reconstruction, roadside safety, maintenance of traffic, commercial vehicle accidents, pedestrian accidents, bicycle accidents, and the analysis of mechanical systems and product failures. Dr. Pfeifer has a strong background in the design, development, and implementation of roadside safety hardware including guardrails, bridge rails, and crash cushions. Over 33 patents have been filed worldwide on behalf of Dr. Pfeifer and associated colleagues who invented safer guardrail systems, vehicle storage systems, shipping container handling systems, and material handling and storage methods. He has also utilized his technical knowledge and understanding of patents to assist in a number of matters involving patent litigation.

Dr. Pfeifer has published numerous papers to various organizations, covering topics such as new guardrail systems, energy absorbing guardrail terminals, breakaway sign mechanisms, and material handling technology. He has shared his expertise with many organizations on topics including vehicle collisions, bicycle accidents, roadway construction zones, and accident reconstruction expert witness utilization. Dr. Pfeifer is a registered Professional Engineer in nine states and he continues to refine his skills and knowledge of accident reconstruction and roadside safety by staying current with new technology and best practices. Dr. Pfeifer has extensive experience with providing deposition and trial testimony as an Engineering Expert. See Full Bio & CV.

Expertise:

Automobile Collisions Tractor-Trailer Collisions Guardrails / Bridge Rails Construction Zones Bicycle Accidents Pedestrian Accidents Motorcycle Accidents Occupant Kinematics

Roadside Safety Airbag Control Module (ACM) Analysis Tractor Trailer Electronic Control Module (ECM) Analysis Product Failure Analysis Maintenance of Traffic (MOT) Evaluation Restraint System Analysis Patent Litigation Technical Analysis

Dr. Ian M. Zeller, PhD, ACTAR, is an accomplished engineer with more than 10 years of experience in Biomechanics and Computational Dynamics fields. He has investigated hundreds of cases ranging from motor vehicle accidents, recreational incidents, medical device designs, as well as injuries from product liability all across the United States. 

Dr. Zeller has graduate level experience in computational dynamics and orthopedic biomechanics with a specific emphasis in dynamics, vibrations, joint contact mechanics, and muscle control during static and dynamic loading applications. Dr. Zeller’s past research includes clinical and computational analysis of the human body with respect to the design and implantation of orthopedic devices for the knee, hip, and spine. He has published in peer-reviewed journals and presented research at both technical and surgical conferences in North America, Europe, and Asia. Dr. Zeller also worked with surgeons across the United States in the design and assessment of knee replacement devices, including personalized and prototype devices to optimize for efficacy and safety. 

Dr. Zeller is also accredited as a traffic accident reconstructionist and continues to conduct research as well as maintain a current knowledge of developing trends and best practices in the biomechanics and engineering fields. Dr. Zeller has published to various organizations on topics ranging from knee replacement design, forward solution modeling, joint mechanics, personalized joint replacements, material structures and properties as well as biological modeling of disease distributions. He also has an extensive testifying history including depositions, trials, and arbitrations.

 See Full Bio & CV.

Expertise:

Biomechanical Analysis Accident Reconstruction Injury Consistency Mechanism of Injury Analysis Vehicle Occupant Kinematics Falling Object Mechanics and Analysis Bicycle Accidents Pedestrian Accidents Amusement Park and Playground Accidents Crash Data Retrieval and Analysis

Product Failure Analysis Seat Belt Analysis Restraint System Occupant Position Determination Sequential Events Analysis Speed Analysis Vehicle Damage Consistency Collision Avoidance Material Fracture Analysis

Michael R. Hill, PhD, PE, is a Biomechanical Engineer passionate about applying biomechanics techniques to solve diverse problems in forensics, medical research, engineering, biology, science, and mathematics. He is an expert in experimental, theoretical, and computational Tissue Biomechanics, with a focus on injury mechanisms, human tissue damage, and nonlinear soft tissue mechanics.

Dr. Hill’s core strengths are in orthopedic and cardiovascular biomechanics, vehicle accident reconstruction, injury consistency analysis, mechanical design, instrumentation, experimental analysis, numerical methods, simulation, statistics, and image processing. Dr. Hill has lectured in the field of biomechanics and numerical methods, and his research has been published in 16 academic articles and presented at 40 international and national scientific conferences.

See Full Bio & CV.

Expertise:

Vehicle Accident Reconstruction Occupant Kinematics Orthopedic and Cardiovascular Biomechanics Human Tissue Damage Mechanics Slip, Trip, and Fall Analysis Injury Consistency Analysis Statistics

Computational Mechanics  Experimental Biomechanics Image Analysis Mechanical Design Event Date Recorder (EDR) Data Retrieval and Analysis Automobile Restraint Analysis Numerical Methods

View Quality Forensic Engineering's Industrial Forensic Engineering Expert Witness Profile.