Construction Failure Analysis Consultants: 18

As an arbitrator, structural/civil engineer, and expert forensic consultant with nearly four decades of experience, Casey Hemmatyar has provided extensive expert services for defendants’ and plaintiffs’ attorneys on numerous construction litigation matters throughout the United States and Canada.

He has been retained as an expert engineer in over one hundred litigation matters on single and class-action legal cases by the U.S. government, law firms, and insurance carriers at the State and Federal levels, working with both plaintiff and defendant sides.

A partial list of litigation cases is available upon request. His understanding of core engineering and legal concepts has enabled him to assist a wide range of clientele effectively. He brings diversified experience in structural and civil engineering design and forensic engineering, investigation, and evaluation.

He also conducts research, has assisted in the development of building codes and standards, and has supervised the construction of domestic and international projects. His experience includes special structures and new buildings as well as modifications, alterations, seismic/hurricane retrofits, and upgrades to existing structures. He has provided failure analysis, expert consultation, structural forensic investigation, and damage assessment services for numerous litigation and insurance-related matters.

He actively presents continuing education lectures to audiences of licensed engineers, architects, and general contractors on topics of structural and forensic engineering throughout North America. Mr. Hemmatyar has been the principal structural engineer on high-profile projects for prestigious clients, including NASA and other notable organizations.  Currently, he directs PSFEG and has served as Director for SEAOSC from 2011 to 2013.

His work encompasses a diverse range of structures, including hospitals,  educational institutions (including schools and universities), telecommunication centers, aviation facilities, government buildings, laboratories, as well as commercial, industrial, and residential structures.

William R. Acorn is founder of Acorn Consulting Services, LLC, an engineering firm. As a consulting mechanical engineer, Bill provides project analysis, forensic reconstructions and litigation support services relating to the design, delivery, and functioning of high-tech manufacturing facilities, semiconductor fabrication facilities, institutional laboratories, data centers, health care facilities and a variety of commercial buildings. He is a recognized expert in the evaluation of deficiencies in HVAC systems, cleanrooms, piping systems, refrigeration systems, construction defects, building and fire code compliance, and patent and trade secret disputes. He represents both plaintiffs and defendants.

Bill has more than 40 years of experience as a professional engineer and is a recognized expert in assessing, evaluating, remediating and providing testimony on complex project design, construction and operational matters. His consulting expertise has been influential in shaping approaches to code compliance and life safety in semiconductor and similar advanced technology facilities.

Certifications and Designations:

• Registered as a Professional Mechanical Engineer in the States of Arizona, California, Colorado, Illinois, Iowa, Nevada, New Hampshire, New Mexico, Oregon, Texas, Utah and Washington.
• Registered with the National Council of Examiners for Engineering and Surveying NCEES (Certificate No. 6999)
• Fellow in the HVAC industry leading organization ASHRAE
• Visiting lecturer at the Arizona State University Del E. Webb School of Construction in Tempe, AZ
• Advisor to CREATE, ACE – Alliance for Construction Excellence and the IAB – Industry Advisory Board, all affiliated with ASU

Building Systems Analysis:

HVAC and Refrigeration Process and Power Piping Plumbing Systems Standard of Care in Design and Construction

Chemical Exposures in the Workplace Cleanroom Design and Performance Codes and Standards Patent and Trade Secret Disputes

Litigation Support: Bill’s pragmatic approach to both forensic and litigation consulting as well as project consulting is based on more than 40 years of real-world experience as a design professional, mentor and forensic analyst, as well as many years as an instructor in professional and academic settings. Represented both plaintiffs and defendants in a variety of jurisdictions throughout the US and Asia. Bill’s ability to explain complex issues to non-technical audiences, including juries, mediators and judges, is a key to successfully solving your litigation challenges.

• Forensic Analysis
• Strategic Litigation Consulting
• Trial Demonstratives
• Expert Testimony

Acorn Consulting Services

Consulting Services: Services range from peer review to conceptual design to development of strategies and programs for expedited project delivery.

Bill frequently acts as an owner’s agent and mentor, functioning as an extension of the owner’s project team. On other projects, Bill serves as a subject matter expert assisting project delivery firms in their development of viable solutions and review of construction documents.

As a project consultant, Bill assures the project gets off to the right start and provides his expertise through completion and operation to maximize return on investment.

Consulting Expertise Includes:

• Project Design and Management Consulting
• Forensic Analysis and Litigation Consulting
• Mentoring & Advanced Education

All About Pavements, Inc. (API) is capable of performing virtually any project related to Pavement Engineering. API's objective is to provide practical, innovative, and cost-effective pavement engineering solutions in the areas of design, research, management construction, repair and maintenance issues. API personnel have worked at numerous airport and roadway systems located throughout the United States and abroad.

Consulting Services:

Pavement Management Systems Non-Destructive Deflection Testing Pavement Condition Surveys Roughness / Ride Quality Testing Network and Project Level Pavement Evaluation

Geographic Information Systems Research and Software Development Technical Training Courses Asset Management Construction Consultation

Wayne J. Seiler, PhD, PE, is a Principal Engineer with All About Pavements Inc (API), with responsibility for Airport, Highway, and Port Pavement engineering and construction projects. With over 38 years of pavement engineering expertise, he is a Registered Professional Engineer in Minnesota, Illinois, North Carolina, Florida, Virginia, Maryland, and Mississippi.

Dr. Seiler has conducted pavement evaluations and developed numerous pavement designs for the reconstruction and rehabilitation of airports throughout the United States during his 38 year career. As a project manager, he has completed pavement evaluation, rehabilitation design, and pavement management work for several commercial airports, including BWI, Charlotte International Airport, Portland International Airport, Pittsburgh International Airport, O'Hare International Airport, Raleigh-Durham International Airport, Dayton International Airport, Wichita’s Mid-Continental Airport, and Montreal’s Mirabel and Dorval International Airports. These studies were accomplished through extensive records review, thorough investigations, pavement condition index surveys, nondestructive deflection testing, remaining life analyses, rehabilitation design using FAA procedures and more advanced mechanistic analyses, and life cycle cost comparisons.

In 2017, ASCE’s Transportation & Development Institute awarded Dr. Seiler with their national Airfield Pavement Practitioner Award. This award honors and recognizes practicing engineers employed in the airfield pavement engineering profession with demonstrated leadership and achievement in airfield pavement projects.

View Dr. Seiler's Expert Witness Profile.

ANNA is a mechanical and electrical engineering firm dedicated to Gas, Coal-fired, Hydroelectric, and Nuclear Power Generation. ANNA has global relationships that augment their ability to solve any power generation problem, no matter how specialized or complex.

Services Include:

• Design and Construction
• Startup, Troubleshooting, Modifications, and Additions
• Forensic and Expert Witness Services

Principal, Ole E. Haaland, PE, has thirty four years experience in power production, design, construction, and commissioning, with 30+ years managing people and projects.

Mr. Haaland is a registered professional engineer in Maryland and held a Senior Reactor Operator’s license at Indian Point #3 Nuclear Power Plant. His experience is in conventional, nuclear, and alternate fuel power plant mechanical and electrical systems management, design, construction, plant outage management, start-up, performance testing, and operation.

Mr. Haaland has performed as aProject Manager, Construction Manager, and Commissioning Manager for several Greenfield power projects and other prime movers around the globe. He has successfully engineered, estimated, planned, executed work, and provided troubleshooting services on electrical switchgear, voltage regulators, plant control and automation systems, steam turbines, hydro turbines, diesel generators, steam generators, isolation valves, engine exhaust systems, heat recovery systems, condensate polishers, feed water heaters, main condensers, and moisture separators.

View Ole Haaland's Expert Witness Profile.

Timothy M. Barrett, RCI, RRC,  CSI, CDT, GRP, has 60 years of experience as a Roofing Contractor, Educator, Manufacturer, and Consultant in the Roofing and Waterproofing Industry. Notable projects have included the White House, Lincoln Memorial, Jefferson Memorial, Gold Bullion Vault at Ft. Knox, Soldier Field, Paris Casino, Bethesda Naval Hospital, Dept. of Interior Headquarters, Transbay Transit Center, and thousands of others.

In addition to standard roofing and waterproofing, Mr. Barrett Designs and Builds Green Vegetated Roofs which can provide incredible contributions to the environment. Having chaired the RCI Greenroof educational program development I and II Committees, and having delivered the program a number of times in the Midwest, the South, the West Coast, the East Coast, and Canada, he is current on the science and the state of the art.

Litigation Support: Mr. Barrett has over 45 years of experience consulting and testifying as a Roofing and Waterproofing Expert. He is very experienced with Forensic Investigations for Thermal and Moisture Protection Systems on commercial, institutional, and industrial waterproofing and roofing projects. Mr. Barrett's services include thorough forensic reporting, depositions, and trial testimony as needed.

Areas of Expertise:

Roofing Waterproofing Insulation Roofing Forensic Investigations Roofing Failure analysis Roofing Material Science Leak Tracing

Adequacy of Roofing Design Green Vegetated Roofs Plaza Deck / Parking Deck Construction Flat Roofs Metal Roofs Workmanship Standards and Materials Roofing / Waterproofing Project Evaluation

Certifications and Affiliations: Registered Roof Consultant (RRC); Roof Consultants Institute (RCI); Construction Document Technologist (CDT); Construction Specifications Institute (CSI); Green Roofing Professional (GRP); Green Roofs for Healthy Cities (GRHC)

Dmorris.consulting Freelance Consulting provides Corporate services to the Construction industry. Principal, David Morris, has over 30 years of deep understanding and hands on experience of Construction and Construction Processes that give him a unique perspective in the industry.

Select Background Experience:

• Prior to founding DMorris.consulting, Mr. Morris served as Director of Virtual Construction for EMCOR Construction Services from 2008-2016. In this role, he directed the virtual construction activities and operations of 82 EMCOR companies. His scope of work included drafting contract language for BIM and pre-construction, setting up new projects in lean and BIM delivery methods, and reviewing new construction technologies among other duties.
• From 2001-2008, Mr. Morris worked with University Mechanical and Engineering Contractors as Director of Virtual Construction. He was responsible for estimating Plumbing, HVAC Piping and Process Piping for numerous research laboratories and healthcare facilities valued at over 100mm + each. He also delivered conceptual estimates for numerous Biotech, Power, and Co-Generation plants.
• Select Project Participation: San Joaquin County Hospital, City of Gilroy Waste Water Reclamation Plant, Shafter Prison, Vandenberg Air Force Base HVAC Replacement, Space Shuttle Launch Complex Project, Tehachapi State Prison Level-4 High Security Prison Housing, Cal Poly San Luis Obispo Co-Gen Facility, Kern Medical Center New Hospital Wing Expansion, Anheuser Busch Yeast Plant Expansion, and multiple Piping, Petrochemical, Hospital, and School projects.

Business Consulting Services:

Process Transformation Estimating Standard Operating Procedures (SOPs) Recruitment Qualification Assistance Job Descriptions

BIM Processes Initial Design, Construction, Operations, Maintenance Project Recovery Assistance Creation and Implementation of “Best Practices” Mechanical, Electrical, Plumbing Coordination (MEP)

*This Mechanical, Electrical, Plumbing, and Fire Protection Systems (MEP) Spatial Coordination Requirements for Construction Installation Models and Deliverables is a derivative work of a best practice guideline written by David Morris in 2003 and modified for the AGC BIMForum in 2009. It is the result of capturing ten years of practical methods on real world construction projects and reflects continual feedback and improvement gained from that process.

View David Morris' Expert Witness Profile.

• Over 35 years of experience in Mechanical / Structural Engineering & Design, Failure Analysis, Product Liability, Industural Asbestos,Pressure Vessel & Boiler analysis and evaluation of mechanical and structural components.
• Extensive trial experience. Has been involved in multi-million dollar cases. Areas involved included:

  
  

  - Piping & pipe supports - Structural failure of products - Failure analysis - Industrial asbestos - Seismic analysis - Fire protection - Pressure vessels

  - Tanks - Construction - Heat transfer analysis - Environmental qualification of equipment - Welding - Product design - Patent information

• Expertise in developing litigation rate-case exhibits and detailed supporting testimony, and in organizing case documentation into easy-to-use computer databases for trial use.

Envista Forensics is a global leader in Forensic Engineering & Recovery Solutions. They provide Cause & Origin, Failure Analysis, Fire and Explosion Investigations, Accident Reconstruction, Damage Evaluations and Equipment Restoration Services following disasters of all kinds. Envista has offered Consulting Services to the insurance, legal and risk management industries, as well as businesses, public entities, and universities for over 25 years. Their Experts travel globally from 30 offices located across the U.S., Canada, Mexico, the U.K., Australia and Singapore.

Insurance Industry / Claims Professionals - Envista understands the need to save money and expedite the claim, to serve the insured and reduce uncertainty. They offer a menu of services that address insurers’ needs for timely, reliable information, as well as their need to satisfy the policyholders. Envista's insurance clients include Property Adjusters, Casualty and Liability Adjusters and Examiners, Boiler & Machinery Specialists, Inland and Ocean Marine Surveyors, Subrogation and Recovery Professionals, SIU (Special Investigation Units), Forensic Accountants, and Lloyd's & London Market.

Businesses - Envista understands that buildings, equipment, data and other assets are critical to the profitable operation of any business. They are proud to offer a variety of services that help businesses protect themselves when they need it most. Envista offers specialized expertise with all types of business, especially Manufacturers, Technology Companies, Food Processing, Hospitals, Medical / Dental Care, Laboratories, R&D (Research & Design), Schools and Universities, Law, Accounting, and other Professional Service Firms, Banking, Securities, Financial, Energy, Transportation, Retail, and Broadcast and Entertainment.

Universities & Public Entities - Risk Managers and Business Officers responsible for the operations of colleges, universities, local government and other entities have the challenging role of working to prevent financial exposure following disasters involving business-critical equipment, buildings/structures, data/networks, as well as safety. Envista engineers and technicians have over a quarter century’s worth of experience providing forensic consulting for college risk professionals, as well as the insurance carriers and legal professionals who serve them.

Consulting Services:

• Equipment Damage Assessments
• Forensic Engineering / Causation Analysis
• Building & Structure Damage Assessments
• Equipment Restoration & Preservation
• Evaluation of Repair and Replacement
• Project Management of Repair and Recovery Efforts Options
• Data Recovery
• Computer Forensics
• Forensic Video Services
• Cyber Incident Analysis

View Envista's Expert Witness Profile.

Expanded Resources LLC is a Construction-related Consulting firm with areas of expertise in Strategic Business Consulting and Construction Management Training. 

Strategic Business Consulting

We help construction managers manage their organizations, programs, and projects effectively.

Approach Includes:

• Formulating strategies for change and improvement
• Solving problems through collaborative sessions
• Providing practical recommendations and helpful solutions
• Developing standard operating procedures, guidelines, and manuals
• Establishing key performance indicators
• Training

Construction Management Training 

We empower your team with the knowledge and skills they need to excel. Our training sessions are tailored to your requirements and framed around industry best practices and real-world experiences.

Training is provided in-person and virtually (synchronous or asynchronous) for all levels of learners in a variety of roles including senior and junior level staff who work for private developers, contractors, and city agencies in project management, procurement, business, and workforce development. 

We are a Registered Continuing Education Provider authorized to provide Professional Development Hours (PDH) for qualified training sessions.

Kiwesa King, PE, CCM, DBIA, PMP, has been engaged in the Vertical Construction Market for over nearly 30 years. She has managed restoration, renovation, and ground-up construction projects. 

Ms. King has worked in the role of engineer, subcontractor, general contractor, and construction manager. She teaches undergraduate, graduate, and continuing education courses in Construction Management at New York University and Fordham University.

Degrees and Certifications:

• New York State Licensed Professional Engineer
• Bachelor of Science and Master of Science in Mechanical Engineering
• Certificate of Competence- Master Fire Suppression Contractor - New York City Department of Buildings (NYCDOB)
• Site Safety Manager: NYCDOB
• Certified Construction Manager: Construction Management Association of America
• Designated Design-Build Professional:  Design-Build Institute of America
• Project Management Professional: PMI

View Kiwesa King's Expert Witness Profile.

Dr. Fari Barzegar is a Licensed Engineer with 37 years of experience in Civil and Structural Engineering & Construction Forensics, Construction Project Management, university teaching/research. He has been an Expert Consultant / Witness in over 100-cases.

Litigation Consulting Expert Witness with testimony and trial experience. Has been retained by insurance companies, law firms, construction, energy, mining, technology & manufacturing industries, governmental & educational institutions, engineering and architectural firms, property owners and individuals. Consultant in both plaintiff and defendant cases.

• Insurance Claims, Peer Reviews
• Buildings, Structures & Materials: Residential, Commercial, Institutional, Historic Structures; Bridges, Towers, Stacks/Chimneys, Containment Vessels, Tanks, Grain Silos, Conduits & Pipelines, Retaining Walls, Foundations, Slabs & Pavements; Concrete, Steel, FRP Composites, Wood, CMU, Brick Masonry & Adobe
• Design / Construction / Integrity issues, Seismic Resistant Design; Errors & Omissions;Standards of Care; Repair & Retrofit Design Documents
• Construction Defects & Accidents; Defective Concrete; OSHA Standards, Excavations / Trenching / Scaffolds
• Slip/Trip/Fall, Code Compliance
• Damage & Failure Investigation; Due Diligence; Non-Destructive Testing 
• Explosion, Impact, Earthquake, Wind, Fire, Hurricane & Flood Damage Inspections / Analysis/Report
• Pile Driving & Demolition Damage to Adjacent Facilities: Vibrations, Cracking / Settlement
• Dynamic, Fracture, Thermal & Finite Element Stress Analysis; Product Design; Failure Simulation / Reconstruction
• Intellectual Property & Patent Infringement

Hastak Consulting Services is a Construction Engineering and Management firm established by Prof. Makarand (Mark) Hastak, PhD, PE, CCP, CRIS, Professor and the Dernlan Family Head of Construction Engineering and Management as well as Professor of Civil Engineering at Purdue University. Dr. Hastak offers consulting services to clients around the world in the following areas:

• Project Controls and Risk Management
• Process Improvement of Capital Projects
• Profitability Improvement and Construction Analytics
• Process Improvement for Factory Built Housing
• Capital Rehabilitation Planning
• Strategic planning and decision-making for resolving project complexities
• Planning for Disaster Mitigation, Resilience, and Capacity Building

Dr. Hastak has been involved with the construction industry for the past 35 years providing his expertise through consulting, research, teaching, and service to the industry. He is a world renowned expert in the area of construction engineering and management including process improvement, disaster risk reduction, resilience and capacity building, infrastructure management, factory built housing, intelligent planning for the built environment, project control, project management decision-making, risk management, contracts and warranties, and strategic planning.

Dr. Hastak is a Professional Engineer (PE), a Construction Risk Insurance Specialist (CRIS), and a Certified Cost Professional (CCP). Dr. Hastak has given over 50 keynotes and invited lectures around the world. As a prominent educator, he also engages in developing training material and workshops as well as regularly teaching professional courses for the A/E/C industry. He has completed the 30-Hour OSHA Hazard Recognition Training for the Construction Industry. His services include consultation, on-site investigation, data collection, assessment,and reporting.

Dr. Hastak Lectures at the 2015 International Conference on Building Resilience

Prof. Hastak has worked on numerous projects sponsored by the Construction Industry Institute (CII), NSF, State DOTs, and City Agencies. He has authored over 200 publications on process improvement, project controls, capital rehabilitation planning, strategic planning, and decision-making. He has co-authored a widely used book on Infrastructure Planning, Engineering, and Economics (McGraw-Hill 2006 and 2015). 

Dr. Hastak is the current President of CIB (International Council for Research and Innovation in Building and Construction), He is also the academic Advisor to the Downstream and Chemicals Committee of the Construction Industry Institute (CII) and serves as the Chair of the Advisory Board of the Global Leadership Forum for Construction Engineering and Management programs (GLF-CEM). He served on the Education Board of the Association for Advancement of Cost Engineering (2004-2016). He was Editor for two AACE books, the Skills and Knowledge of Cost Engineering (6th Ed. 2015) and the CCP Certification Study Guide (2nd Ed. 2016). He was also the Editor-in-Chief of the ASCE Journal of Management in Engineering (2009-2016).

View Dr. Hastak's Expert Witness Profile.

Isaak Technologies provides expert witness, consulting & training services in the areas of design, construction, procurement, implementation, commissioning and operations of information technology, telecommunications, network systems and critical data center facilities. Isaak Technologies provides clear solutions to complex challenges using best-practice forecasting, strategy & risk mitigation. 

Philip J. Isaak, PE, P.Eng., DCDC, RCDD, SMIEEE, has over 20 years of experience as a design & operations consultant & training provider, with a focus in the information technology, telecommunications & critical data center facility industries. 

In recognition of Mr. Isaak’s professional standing, the Officers & Board of Directors of the Institute of Electrical & Electronic Engineers (IEEE), the world’s largest professional association for advancement of technology, certified his election to the grade of Senior Member, a level only 9% of IEEE’s over 400,000 global members hold. 

Professional Services:

Litigation	IT & Telecommunications	Critical Facilities
IP, Trade Secrets, Contracts Design, Construction, Implementation Claims, Damages, Defects, Delays, Failure & Quality Control Analysis Failed System Analysis Unfulfilled SLAs Technical Investigations Claims Preparation & Analysis Expert Reports Settlement Opinions & Strategies Deposition & Trail Testimony	Needs Assessment, Gap Analysis & Audits Strategic Plans Design, Procurement & Implementation Management Business Continuity & Disaster Recovery Planning Capacity Planning & Forecasting Operations Planning Enterprise Architecture, Network Systems, Services & Cabling Infrastructure Planning Outsourcing Analysis & Planning for Colocation, XaaS or Cloud Services	Design Consultant, Contractor & Commissioning Vendor Qualification & RFP Development Reliability Analysis Design Peer Review Site Assessments & Planning Facility Assessments & Audits Space, Power & Cooling Capacity & Redundancy Planning Commissioning Management Standard Operating, Maintenance & Emergency Response Procedures

View Philip Isaak's Expert Witness Profile.

The four PhD and registered PEs at Miller Engineering are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. We have a dedicated office with a full time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise covers well the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering. The areas listed below are from actual projects completed in our 40 years of history. 

Vehicles Car/Truck Accident Reconstruction Crash Data Retrieval (CDR) Visibility & Reaction Time Analysis Tires, Trailers, Brakes & Accelerators Truck/Off Road Vehicle Egress/Ingress Traffic Signing and Construction Zones Electronic Vehicles Mechanical & Electrical Safety Product Safety & Analysis Machinery - Metal, Wood, Plastic Molding Machine Guarding & Safety, Robots, Automation Hazard and Risk Analysis Employee Safety Procedures – OSHA Electrical Distribution & Transmission Hazards

Warnings & Instructions Warning Labels & User Manual Design Hazard Analysis & Product Label Designs Medical Device & Drug Warnings & Instructions Inadequate Warnings Analysis Standard Compliance (ANSI Z535) Product Recall Information & Strategies Consumers/Household Safety Appliances & Tools Child Furniture, Choking, Playgrounds Swimming Pools & Exercise Equipment Recreation - ATV, Boats, Bicycles, Boards Ladder, Stair, Step and Railing Accidents Slip, Trip, & Fall Accidents CPSC Recall Information & Strategies

Chemicals Safety & Labeling NEW OSHA HAZCOM (2012) & GHS Review MSDS, SDS and Product Label Compliance Toxic Torts - Diacetyl, Asbestos, Benzene, Lead, Carbon Monoxide Vaping & E-Cigarette Health Effects Chemical Exposures & Workplace Safety Chemical Inhalation, Ingestion, Dermal Contact Contamination - Water & Environmental Manufacturing & Process Line Accidents Slips, Trips, Falls, & Entanglements Fires & Explosions Cause & Origin Investigations Gas, Vapor, & Electrical Spontaneous Combustion Vaping & E-cigarette Battery Failures Fire Control & Explosion Issues

Agriculture Tractor & Equipment Accidents Chemical Applications & Exposures Crop Storage & Harvesting Accidents Pesticides Construction Vehicle Visibility Accidents Slip, Trip, & Fall Accidents Power Tool Repetitive & Immediate Injuries Scaffolding - Cranes - Hoisting - Fork Lifts Insurance Subrogation & Forensics Accident Investigations Electrical & Fire Causation Chemical Leakage Damage Defective Equipment Injuries Premise and Process Damages

James M. Miller, PE, PhD – Founder  Dr. Miller is an Emeritus Engineering Professor at the University of Michigan. He has directly served in Washington originating several Federal OSHA safety regulations, and interacts regularly with CPSC regarding safety and product recalls. Dr. Miller often works on projects relating to compliance with occupational safety standards, provides upper management guidance on product design, recall and liability issues, and serves as an expert witness.

Mark R. Lehto, PhD – Co-Founder Dr. Lehto is a Professor of Engineering at Purdue University. He completed his Ph.D. in engineering at the University of Michigan, where he specialized in Human Factors Engineering, in particular Warnings and Labeling. Dr. Lehto specializes in knowledge engineering, warnings and instructions, structuring expert systems, accident modeling, accident statistical analysis, consumer product safety, boating safety, in-field national surveys of product usage, and product information effectiveness.

David R. Clark, PE, PhD – Co-Founder Dr. Clark is an Emeritus Engineering Professor at Kettering University. He was an engineering PhD graduate from the University of Michigan, where he specialized in human factors engineering and system safety analyses. He has a special expertise in electrical fire- and explosion-related accidents, and has extensive experience working for loss control companies, performing over 150 fire origin and cause investigations in the past few years.

Adam M. Olshove, PE, MSE – Engineering Manager Mr. Olshove has over 10 years of experience providing consulting services to industry and the legal profession. He holds an MS in Mechanical Engineering with a focus on control systems and battery modeling (2019), and a BS in Mechanical Engineering (2012), both from the University of Michigan. He has performed dozens of on-site investigations nationwide in relation to consumer product design and industrial accidents, including failure analysis and testing.

Jeffrey D. Rupp, MSE – Engineering Associate Mr. Rupp has a BS in mechanical engineering from the University of Michigan and a MS in systems engineering and engineering management from Wayne State University. Among his company affiliates is 26 years with Ford Motor Company and Volvo Car Corporation, where he was involved in crash development and crash sensing calibrations.

Florida Office:
Andrew Avalon, PE, PSP
Chairman & CEO
8633 Willow Kane Court
Orlando, FL 32835
aavalon@long-intl.com
T: (407) 445-0825     F: (407) 650-3399

---

Long International provides expert engineering and construction claims analysis, expert testimony, project management consulting, and insurance claims analysis services. We focus on projects in the following industries: building and construction; gas, gasification, GTL, LNG, and NGL; industrial and manufacturing; mineral and mineral processing; offshore oil and gas; oil sands; pipelines and utilities; power; refineries, petrochemical, and chemical; transportation; and water, wastewater, dams, and marine.  We analyze claims, not limited to, disputed change orders, schedule delay, acceleration, time extensions, liquidated damages, loss of productivity, defective specifications, and deficient project management performance.

Richard J. Long, P.E., P.Eng., Founder of Long International, has over 50 years of U.S. and international consulting experience involving construction contract disputes analysis and resolution, arbitration/litigation support and expert testimony, project management, engineering/construction management, cost and schedule control, and process engineering. As an internationally recognized expert in the analysis and resolution of complex construction disputes for over 35 years, Mr. Long has served as the lead expert on over 300 projects having claims ranging in size from US$100,000 to over US$2 billion. He has presented and published numerous articles on claims analysis, entitlement issues, CPM schedule and damages analyses, cumulative impact claims, and claims prevention.

Rod C. Carter, CCP, PSP is President of Long International and has over 20 years of experience in construction project controls, contract disputes and resolution, negotiations, mediation, arbitration support, and expert testimony on scheduling, loss of productivity, and quantum issues.  He has experience in entitlement, schedule, and damages analyses on over 30 construction disputes ranging in value from US$100,000 to US$7 billion, related to oil and gas, oil refinery, LNG, heavy civil, nuclear, environmental, chemical, power, industrial, commercial, and residential construction projects.  Mr. Carter is proficient in the use of Primavera P6 and P3 software, and he has extensive experience in assessing the impact to engineering and construction works of RFIs, change orders and other events.  Mr. Carter specializes in loss of productivity, cumulative impact, and quantum calculations, and had a lead role in assessing damages on more than a dozen major disputes.  In addition, Mr. Carter has developed cost and schedule risk analysis models using Monte Carlo simulations to address the uncertainty of estimates and claims.

Scott M. Francis, P.E., PSP is a Vice President of Long International and has over 20 years of experience in project management, contract disputes analysis and resolution, CPM schedule preparation, execution, and analysis, productivity analysis, contract administration, design engineering, construction management, and government contracting.  He provides schedule development and assurance services, cost estimating, and claims analysis services on projects for both owners and contractors.  Specific responsibilities include CPM development and reviews, CPM schedule delay and acceleration analyses, change order impact analysis, issue identification, correlation of impacts to schedule activities, and productivity evaluations.

Quality Forensic Engineering, LLC is a full-service forensic engineering firm, providing engineering support to clients in the areas of accident reconstruction, biomechanics, fire investigations, patent litigation analysis, premises liability, product liability, and tire failure analysis. We use the latest technology and industry proven techniques to provide thorough analysis and conclusions for the most difficult engineering questions. Our forensic engineers support clients throughout the U.S. Our locations include Tallahassee, FL; Jacksonville, FL; Tampa, FL; New Orleans, LA; San Diego, CA; and Tucson, AZ.

Dr. Brian Pfeifer, P.E. - Dr. Pfeifer is an Engineering Expert with over 25 years of experience investigating thousands of cases involving a variety of forensic engineering issues. He is a leading expert in accident reconstruction, roadside safety, maintenance of traffic, commercial vehicle accidents, pedestrian accidents, bicycle accidents, and the analysis of mechanical systems and product failures. Dr. Pfeifer has a strong background in the design, development, and implementation of roadside safety hardware including guardrails, bridge rails, and crash cushions. Over 33 patents have been filed worldwide on behalf of Dr. Pfeifer and associated colleagues who invented safer guardrail systems, vehicle storage systems, shipping container handling systems, and material handling and storage methods. He has also utilized his technical knowledge and understanding of patents to assist in a number of matters involving patent litigation.

Dr. Pfeifer has published numerous papers to various organizations, covering topics such as new guardrail systems, energy absorbing guardrail terminals, breakaway sign mechanisms, and material handling technology. He has shared his expertise with many organizations on topics including vehicle collisions, bicycle accidents, roadway construction zones, and accident reconstruction expert witness utilization. Dr. Pfeifer is a registered Professional Engineer in nine states and he continues to refine his skills and knowledge of accident reconstruction and roadside safety by staying current with new technology and best practices. Dr. Pfeifer has extensive experience with providing deposition and trial testimony as an Engineering Expert.

See Full Bio & CV.

Expertise:

Automobile Collisions Tractor-Trailer Collisions Guardrails / Bridge Rails Construction Zones Bicycle Accidents Pedestrian Accidents Motorcycle Accidents Occupant Kinematics

Roadside Safety Airbag Control Module (ACM) Analysis Tractor Trailer Electronic Control Module (ECM) Analysis Product Failure Analysis Maintenance of Traffic (MOT) Evaluation Restraint System Analysis Patent Litigation Technical Analysis

Dr. Ian M. Zeller, PhD, ACTAR, is an accomplished engineer with more than 10 years of experience in Biomechanics and Computational Dynamics fields. He has investigated hundreds of cases ranging from motor vehicle accidents, recreational incidents, medical device designs, as well as injuries from product liability all across the United States. 

Dr. Zeller has graduate level experience in computational dynamics and orthopedic biomechanics with a specific emphasis in dynamics, vibrations, joint contact mechanics, and muscle control during static and dynamic loading applications. Dr. Zeller’s past research includes clinical and computational analysis of the human body with respect to the design and implantation of orthopedic devices for the knee, hip, and spine. He has published in peer-reviewed journals and presented research at both technical and surgical conferences in North America, Europe, and Asia. Dr. Zeller also worked with surgeons across the United States in the design and assessment of knee replacement devices, including personalized and prototype devices to optimize for efficacy and safety. 

Dr. Zeller is also accredited as a traffic accident reconstructionist and continues to conduct research as well as maintain a current knowledge of developing trends and best practices in the biomechanics and engineering fields. Dr. Zeller has published to various organizations on topics ranging from knee replacement design, forward solution modeling, joint mechanics, personalized joint replacements, material structures and properties as well as biological modeling of disease distributions. He also has an extensive testifying history including depositions, trials, and arbitrations. 

See Full Bio & CV.

Expertise:

Biomechanical Analysis Accident Reconstruction Injury Consistency Mechanism of Injury Analysis Vehicle Occupant Kinematics Falling Object Mechanics and Analysis Bicycle Accidents Pedestrian Accidents Amusement Park and Playground Accidents Crash Data Retrieval and Analysis

Product Failure Analysis Seat Belt Analysis Restraint System Occupant Position Determination Sequential Events Analysis Speed Analysis Vehicle Damage Consistency Collision Avoidance Material Fracture Analysis

 Michael R. Hill, PhD, PE, is a Biomechanical Engineer passionate about applying biomechanics techniques to solve diverse problems in forensics, medical research, engineering, biology, science, and mathematics. He is an expert in experimental, theoretical, and computational Tissue Biomechanics, with a focus on injury mechanisms, human tissue damage, and nonlinear soft tissue mechanics.

Dr. Hill’s core strengths are in orthopedic and cardiovascular biomechanics, vehicle accident reconstruction, injury consistency analysis, mechanical design, instrumentation,
experimental analysis, numerical methods, simulation, statistics, and image processing. Dr. Hill has lectured in the field of biomechanics and numerical methods, and his research has been published in 16 academic articles and presented at 40 international and national scientific conferences.

See Full Bio & CV.

Expertise:

Vehicle Accident Reconstruction Occupant Kinematics Orthopedic and Cardiovascular Biomechanics Human Tissue Damage Mechanics Slip, Trip, and Fall Analysis

Computational Mechanics  Experimental Biomechanics Image Analysis Computational Modeling Event Date Recorder (EDR) Data Retrieval and Analysis Automobile Restraint Analysis

View Quality Forensic Engineering Industrial Forensic Engineering Consulting Profile.