Chemistry - Chemical Industry Expert Witnesses: 22

Dr. Michael L. Dourson has a PhD in Toxicology from the University of Cincinnati, College of Medicine, and is a board-certified toxicologist (i.e., DABT) with over 40 years of experience in Environmental Risk Assessment. 

Dr. Dourson serves as President/Director of the 501c3 nonprofit organization Toxicology Excellence for Risk Assessment (TERA). Prior to this, he was Senior Advisor in the Office of the Administrator at the US EPA. Before this, he was a Professor in the Risk Science Center at the University of Cincinnati, College of Medicine and also worked at TERA and US EPA. 

Litigation Support - Dr. Dourson's specialized knowledge of the issues and pitfalls involved in the research and development of human health risk assessments along with his cutting-edge toxicology expertise allows him to provide state-of-the-art science assessments for attorneys representing plaintiff and defense. 

Services:

• Review toxicity data to assist in determining whether an exposure was the proximate cause of health effects;
• Perform literature searches and providing written critical analysis of literature;
• Provide services related to expert witness opinions and testimony;
• Review and analyzing environmental monitoring data;
• Assist with the development of exposure and medical monitoring programs; and
• Plan and manage peer review and peer consultation programs.

Areas of Expertise:

RfD Assessments RfD Risk Technology Toxicology Reviews Occupational Toxicology Screening Assessments Product Assessments Site Assessments PFAs

Safe Dose Environmental Regulations Research and Methods Development Quantitative Risk Assessment Mode of Action Analysis Emerging Risk Issues Green Chemistry Pharmaceutical Safety

Dr. Dourson has been awarded the Arnold J. Lehman award from the Society of Toxicology, the International Achievement Award by the International Society of Regulatory Toxicology and Pharmacology, and 4 bronze medals from the U.S. Environmental Protection Agency. He has been elected as a Fellow of the Academy of Toxicological Sciences (i.e., FATS) and as a Fellow for the Society for Risk Analysis (i.e., FSRA).

He is the co-author of 3 Patty’s Toxicology chapters on PFAS chemistries and the co-author of 6 research papers on PFOA, two of which have won paper of the year awards from the Society of Toxicology’s Regulatory and Safety Evaluation Specialty Section.

Ted W. Simon, PhD, DABT, is an award winning Environmental Toxicologist and Scientist. His expertise is in toxicology, risk assessment, mathematical modeling, statistics, neuroscience, and environmental / ecological health issues.

Dr. Simon has over 10 years of experience as a toxicologist employed by the Environmental Protection Agency (EPA). He served as EPA’s senior toxicologist in the waste management division working on risk and soil cleanup.

Teaching Experience - Since 2001, Dr. Simon has served as an Instructor / Adjunct Professor in the Department of Environmental Health Science, College of Public Health, at the University of Georgia.

Public Speaker - Well published, including the author of a textbook on toxicology and environmental risk assessment, Dr. Simon has extensive national and international public speaking experience. Since 1996, he has been delivering seminars and lectures to universities and national institutes on many subjects within his area of expertise. In 2016, he delivered a lectures on “Bayesian Methods for Application of Uncertainty Factors,” to the Society of Toxicology Annual Meeting, New Orleans, LA, and “Quantitative Prediction of Phenotypic Change from High Throughput Assay Results,” to the EPA's Workshop on In Vitro to In Vivo Extrapolation, Research Triangle Park, NC.

Litigation Support - Dr. Simon has over 15 years of experience offering expert witness services to counsel representing both plaintiff and defendant. He has been retained over 20 times since 2000 for cases involving environmental risk, drug and alcohol cases, DUI, accidental poisoning, and intellectual property. Dr. Simon has particular expertise in dioxin-like chemicals and polychlorinated biphenyls (PCBs). His services include consulting, reports, deposition, and trial testimony when necessary.

Areas of Expertise:

Dioxins PCBs Drugs Alcohol Poisoning DUI / DWI Water Contamination Soil Contamination Environmental Risk Assessment

Environmental Toxicology Carcinogenicity Food Contamination Pesticides Fracking Lead Marijuana Polychlorinated Biphenyls Intellectual Property

George Schiro is a DNA Technical Leader - Forensic Scientist. His duties include incorporating the DNA Advisory Board (DAB) standards, accountability for the technical operations of the lab, conducting DNA analysis using the 13 STR core loci and Y STR in casework, DNA research, forensic science training and crime scene investigation.

Mr. Schiro has worked over 3500 cases and has qualified as an expert over 175 times in 31 Louisiana parish courts, Arkansas, California, Florida, Mississippi, Missouri, Nevada, New York, Texas, West Virginia, federal court, U.S. court-martial, and two Louisiana city courts. Has also consulted on cases in 29 states.

Qualified as an Expert in the Following Areas:

Latent Fingerprint Development Serology Crime Scene Investigation Forensic Science Trajectory Reconstruction Shoeprint Identification

Crime Scene Reconstruction Bloodstain Pattern Analysis DNA Analysis Fracture Match Analysis Hair Comparison Forensic Science Training

Gary D. Fletcher, PhD,  is the Founder and Principal Consultant at RnDDx Solutions LLC, a consulting firm founded in 2015, focused on Industrial Mechanical Engineering and Biomedical Engineering and Research and Product Development.  In his 30 years of experience, he has been co-inventor on 23 patents for devices and methods in blood collection and processing.

Litigation Support - Dr. Fletcher has subject matter expertise in Medical Device Mechanical Engineering and subject matter expertise in Medical Devices for blood and specimen collection and sample processing for in vitro diagnostics, point of care diagnostics, and therapeutics, including glucose monitoring. He serves as an expert witness in patent infringement cases involving medical device and diagnostic biomedical engineering, blood collection, separation, fluidic preparation, glucose monitoring, and cell therapy preparation devices.

Dr. Fletcher offers patent litigation services to law firms and lawyers supporting medical device and diagnostic industry clients, who need physical science and mechanical and biomedical engineering expertise for District Court, PTAB, and ITC patent cases. As an industry consultant, his ideal clients are R&D, product development, and innovation leaders in startup, emerging, and established medical device and diagnostic companies, who face product development and competitive challenges.

Areas of Expertise:

Mechanical Engineering Biomedical Engineering Medical Devices Product Development Clinical Diagnostics Blood Collection Blood  / Cell Separation Needles / Lancets Biospecimens Point of Care Testing Microfluidics

X-Ray Spectroscopy Cell Therapy Intellectual Property / Patent Infringement Microscopy Physics Biomedical Sensing Optics Imaging Mathematics Glucose Monitors Lasers

Dr. Fletcher is an entrepreneurial executive with expanding R&D roles in business, technology, and new product development leadership and execution, building and guiding teams in both Fortune 500 and startup companies. With a PhD in physics from Yale, he has a proven record of leadership in creating innovative new businesses and products in healthcare, medical devices, diagnostics, life, materials, and optical sciences.

Catherine Adams Hutt, PhD, RD, CFS, has senior public and private experience as a Chief Science & Regulatory Officer in the Food Safety Industry. She is a Registered Dietitian and Certified Food Scientist.

With experience in the public and private sectors, Dr. Adams Hutt provides advice and guidance on a wide range of topics, including regulatory compliance, food safety, quality systems management, supply chain, health and wellness, business strategy, product development, and software solutions for management of quality and product development processes.

Dr. Adams Hutt was formerly Chief Quality, Food Safety, and Nutrition Officer for McDonald’s Corporation and led Supplier and Restaurant Food Safety teams for YUM! Brands. She was Chief Quality Officer for Coors Brewing Company, led the North America Quality team at H.J. Heinz, and developed next generation Quality programs for the Campbell Soup Company. Dr. Adams Hutt was Assistant Administrator for the US Department of Agriculture’s Food Safety and Inspection Service (FSIS) where she led the development of HACCP as a regulatory tool. She has been an active participant in international programs, and led the U.S Delegation for the Codex Food Hygiene Committee.

Litigation Support - Catherine Adams Hutt has high-level training and senior experience in a variety of food related fields, including food manufacturing, food service, food regulations, and nutrition. Her diverse background makes her ideally suited for challenging cases where it is important or helpful to be able to integrate information from a number of different disciplines. Her professional experience is truly unique and her credentials make her unimpeachable. Most of Dr. Adams Hutt's cases are settled before going to trial on the strength of her expert opinion. She has experience with both deposition and trial, understanding the art of the exercise, and works to deliver the optimal results for her clients - plaintiff or defendant.

Areas of Expertise:

Food Safety Food Manufacturing Nutrition Foodborne Illness Food Fraud Food Forensics

Food Poisoning Food Adulteration Dietary Supplements Food Labeling Quality Management Health Claims

Texas Office 4568 Elm Bottom Circle Aubrey, TX 76227

Virginia Office 124 South Fairfax Alexandria, VA 22314

View Dr. Adams Hutt's Consulting Profile.

Nancy M. McClellan, MPH, CIH, CHMM, is an award winning, Industrial Hygiene and Safety expert with over 25 years of broad international experience practicing, teaching and authoring to anticipate, recognize, evaluate, control and prevent workplace health and safety hazards in high hazard industries.

 Prior to her independent expert and consulting practice, Ms. McClellan practiced industrial hygiene management as a Board Certified Industrial Hygienist on a global scale for both AbbVie, a major producer of highly potent biopharmaceuticals and LafargeHolcim, the world’s largest building materials corporation.

She currently provides industrial hygiene and safety legal expert, management, training, and select field services to sectors such as the pharmaceutical, automotive, military, hospital, electronic, food, chemical, and commercial real estate industries. 

She is the Chair of the University of Michigan Graduate School of Public Health COHSE External Advisory Board and an international AIHA Distinguished expert lecturer.

Ms. McClellan is domestically and internationally recognized for leadership service to the IH profession for the American Industrial Hygiene Association (AIHA), the American Board of Industrial Hygiene (ABIH), the Occupational Hygiene Training Association (OHTA) and the Joint Industrial Hygiene Ethics Education (JIHEEC) Boards of Directors and Committees. She currently serves on the AIHA Executive Board of Directors.

As a result of her well-practiced ability to describe science in lay terms, Ms. McClellan was interviewed in October 2020 on the ABC Network’s Good Morning America program regarding Covid pandemic controls, as well as a number of ABC News and professional journal articles regarding the association between HVAC systems, Indoor Air Quality and the Covid pandemic to advance public and worker health protections.

Ms. McClellan has extensive expertise in Pandemic, Covid-19 Response Management, including chemical and non-chemical disinfectant exposure evaluation and real estate/facility controls.

Good Morning America Pandemic / Indoor Air Interview 

Litigation Support Goal - Nancy McClellan seeks to continue a 50/50 defense/plaintiff practice that presents challenging cases determining worker and/or public exposure to chemical, biological, physical or ergonomic hazards. Her services include thorough review, reporting, depositions, and trial testimony.

Areas of Expertise:

• Chemical and biological airborne and dermal exposure assessment and modeling
• Bioaerosol Assessment and Pandemic Control Programs 
• Indoor Air Quality and Air disinfection Technologies Evaluation
• H&S Policy and Program Development and Audits
• Highly Potent Compound Containment 
• Workplace Hazard Risk and Exposure Assessment 
• USP 800 Safe Hazardous Drug Handling Conformance
• Hearing Conservation Program Development and Controls
• Respiratory Protection Evaluation and Program Development
• Worksite Ergonomic Evaluation and Controls

View Nancy McClellan's Consulting Profile.

Dr. James C. Norris, Ph.D., DABT, EURT is an Expert Witness in Toxicology and Pharmacology. He has Litigation and Arbitration experience in the United States, United Kingdom and Hong Kong. Dr. Norris has given testimony to government agencies, has acted as a consultant for the media (BBC) and is an Industrial Site Crisis Team Member. He is avaliable for both Plaintiff and Defense.

Areas Of Expertise:

• Carcinogenicity and Chemicals
• Combustion or Fire Toxicolog
• General and Inhalation Toxicology
• Pesticides, and Pharmaceuticals (pharmacology)

Professional Affiliations:

• American Association of Pharmaceutical Scientists
• British Toxicology Society
• Society of Toxicology
• Editorial Boards of Inhalation Toxicology and Journal of Fire Sciences

Peter Howell, PE, CSP, CFEI, FAIChE  has almost 50 years of experience in the Design, Operation, Maintenance and Management of Chemical and Petrochemical Facilities with positions such as process engineer, project engineer, maintenance foreman, technical manager, engineering manager, plant manager and vice president and general manager.

Mr. Howell has investigated approximately 125 incidents that occurred in chemical plants, refineries, pulp and paper mills and similar industries for attorneys, insurance companies and regulatory agencies. He has determined the root causes using methodologies consistent with NFPA 921, Center for Chemical Process Safety, United Steel Workers, and the National Safety Council.  The root causes determined were based on the evidence, Recognized and Generally Accepted Good Engineering Practices and federal regulations.

Mr. Howell has extensive experience in developing, implementing and auditing the elements of OSHA's process safety management (PSM) regulation and EPA's risk management plan (RMP). He also has extensive experience in accident and incident investigations involving fire, explosion, and release of toxic and hazardous materials.  He He frequently serves as an expert witness and provides litigation support.

Areas of Expertise:

OSHA Compliance Safety Performance Improvement Incident Investigation Recognized and Generally Accepted Good Engineering Practices (RAGAGEP) OSHA PSM Regulation

EPA RMP Regulation Process Hazards Analysis Design, Operation Maintenance and Management of Chemical and Refinery Equipment and Facilities

Mark O. Barnett, PhD, PE, BCEE has over 30 years of national and international Environmental Engineering and Science experience in industry, government, and academia ranging from water supply and sanitation in rural communities to nuclear waste disposal. He is currently a Professor of Environmental Engineering in the Department of Civil and Environmental Engineering at Auburn University.

Litigation Support - Dr. Barnett has served as an environmental expert witness-expert consultant on cases in administrative, federal, and state courts ranging from permit applications to toxic tort lawsuits. He has written expert reports, filed affidavits, been deposed, and given testimony. Further, he has extensive litigation experience from his service as an administrative judge with the Nuclear Regulatory Commission. Writing samples, transcripts, and references are available upon request.

Areas of Expertise:

Water and Wastewater Treatment Site Assessment and Remediation Soil and Groundwater Contamination Human Health Risk Assessments Contaminant Bioavailability Environmental Permits

Environmental Forensics Environmental and Aquatic Chemistry Radioactive and Hazardous Waste Management Nuclear Environmental Engineering Sustainable Design and Development Mining Impacts

Background Experience - Dr. Barnett is a licensed professional engineer and a board-certified member of the American Academy of Environmental Engineers and Scientists. His technical research focuses on the chemical processes controlling water quality and contaminant behavior in natural and engineered systems. He has been a principal or co-principal investigator on seventeen grants totaling over $12 million, and he has published over fifty peer-reviewed journal articles, several book chapters, and a book that collectively have received over three-thousand citations.

Dr. Barnett has a B.S. in Chemical Engineering and an M.S. in Environmental Engineering from the University of Tennessee and a Ph.D. in Environmental Sciences and Engineering from the University of North Carolina. He has taught fundamental and applied courses in environmental and aquatic chemistry; water and wastewater treatment; environmental engineering principles and design; and sustainable design and development.

Florida Office:
Andrew Avalon, PE, PSP
Chairman & CEO
8633 Willow Kane Court
Orlando, FL 32835
aavalon@long-intl.com
T: (407) 445-0825     F: (407) 650-3399

---

Long International provides expert engineering and construction claims analysis, expert testimony, project management consulting, and insurance claims analysis services. We focus on projects in the following industries: building and construction; gas, gasification, GTL, LNG, and NGL; industrial and manufacturing; mineral and mineral processing; offshore oil and gas; oil sands; pipelines and utilities; power; refineries, petrochemical, and chemical; transportation; and water, wastewater, dams, and marine. We analyze claims, not limited to, disputed change orders, schedule delay, acceleration, time extensions, liquidated damages, loss of productivity, defective specifications, and deficient project management performance.

Richard J. Long, P.E., P.Eng., Founder of Long International, has over 50 years of U.S. and international consulting experience involving construction contract disputes analysis and resolution, arbitration/litigation support and expert testimony, project management, engineering/construction management, cost and schedule control, and process engineering. As an internationally recognized expert in the analysis and resolution of complex construction disputes for over 35 years, Mr. Long has served as the lead expert on over 300 projects having claims ranging in size from US$100,000 to over US$2 billion. He has presented and published numerous articles on claims analysis, entitlement issues, CPM schedule and damages analyses, cumulative impact claims, and claims prevention.

Rod C. Carter, CCP, PSP is President of Long International and has over 20 years of experience in construction project controls, contract disputes and resolution, negotiations, mediation, arbitration support, and expert testimony on scheduling, loss of productivity, and quantum issues.  He has experience in entitlement, schedule, and damages analyses on over 30 construction disputes ranging in value from US$100,000 to US$7 billion, related to oil and gas, oil refinery, LNG, heavy civil, nuclear, environmental, chemical, power, industrial, commercial, and residential construction projects. Mr. Carter specializes in loss of productivity, cumulative impact, and quantum calculations, and had a lead role in assessing damages on more than a dozen major disputes.  In addition, Mr. Carter has developed cost and schedule risk analysis models using Monte Carlo simulations to address the uncertainty of estimates and claims.

Scott M. Francis, P.E., PSP is a Vice President of Long International and has over 20 years of experience in project management, contract disputes analysis and resolution, CPM schedule preparation, execution, and analysis, productivity analysis, contract administration, design engineering, construction management, and government contracting.  He provides schedule development and assurance services, cost estimating, and claims analysis services on projects for both owners and contractors.  Specific responsibilities include CPM development and reviews, CPM schedule delay and acceleration analyses, change order impact analysis, issue identification, correlation of impacts to schedule activities, and productivity evaluations.

Randal Hill, PhD, has more than 40 years of experience practicing Materials Science and Chemistry. Dr. Hill is a distinguished product innovator credited with 59 patents. He is an involved member of multiple organizations, including American Chemical Society, Society of Petroleum Engineers, American Physical Society, and the American Oil Chemists Society.

Litigation Support - Dr. Hill is a well-respected chemical engineer who provides a scientist’s thorough understanding of diverse technology about chemistry, chemical engineering, and patenting. He offers services to attorneys representing plaintiff and defense. Dr. Hill breaks down complex, technical ideas into simple concepts, communicating industry-specific terminologies to judges, juries, and to those who belong to other fields of expertise. 

Areas of Expertise:

Chemistry / Chemical Engineering Materials Science Intellectual Property / Patents Silicones Surfactants Emulsions Microemulsions Chemical Product Development

Colloid and Surface Science Agricultural Adjuvants Chemicals Detergents Formulation Liquid Crystals Personal Care Products Household Care Products Electrophoretic Displays

Background Experience - Dr. Hill began his career at a major detergent company followed by a company developing sugar-based surfactants. He went on to spend 20 years with Dow Corning developing personal care applications for silicones, leading the pigment science group at E Ink developing the next generation of color electrophoretic ink displays, and leading the Formulation Development group at Flotek to expand the product line by 300% and grow the patent portfolio by 1400%.

Dr. Hill is now known for his work on silicone surfactants, especially for his work on super wetting. During his time as MIT Visiting Scientist with Dow, he also initiated work on silicone-based superhydrophobic surfaces, which led to a publication that has since been cited nearly 1,500 times.

Dr. Hill is the author of 60 publications, including an authoritative book entitled, Silicone Surfactants. He is a highly awarded inventor with accolades that include 3 Dow Corning Technical Achievement Awards, as well as the 2017 AOCS Samuel Rosen Award for Surfactant Chemistry.

The four PhD and registered PEs at Miller Engineering are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. We have a dedicated office with a full time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise covers well the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering. The areas listed below are from actual projects completed in our 40 years of history. 

Vehicles Car/Truck Accident Reconstruction Crash Data Retrieval (CDR) Visibility & Reaction Time Analysis Tires, Trailers, Brakes & Accelerators Truck/Off Road Vehicle Egress/Ingress Traffic Signing and Construction Zones Electronic Vehicles Mechanical & Electrical Safety Product Safety & Analysis Machinery - Metal, Wood, Plastic Molding Machine Guarding & Safety, Robots, Automation Hazard and Risk Analysis Employee Safety Procedures – OSHA Electrical Distribution & Transmission Hazards

Warnings & Instructions Warning Labels & User Manual Design Hazard Analysis & Product Label Designs Medical Device & Drug Warnings & Instructions Inadequate Warnings Analysis Standard Compliance (ANSI Z535) Product Recall Information & Strategies Consumers/Household Safety Appliances & Tools Child Furniture, Choking, Playgrounds Swimming Pools & Exercise Equipment Recreation - ATV, Boats, Bicycles, Boards Ladder, Stair, Step and Railing Accidents Slip, Trip, & Fall Accidents CPSC Recall Information & Strategies

Chemicals Safety & Labeling NEW OSHA HAZCOM (2012) & GHS Review MSDS, SDS and Product Label Compliance Toxic Torts - Diacetyl, Asbestos, Benzene, Lead, Carbon Monoxide Vaping & E-Cigarette Health Effects Chemical Exposures & Workplace Safety Chemical Inhalation, Ingestion, Dermal Contact Contamination - Water & Environmental Manufacturing & Process Line Accidents Slips, Trips, Falls, & Entanglements Fires & Explosions Cause & Origin Investigations Gas, Vapor, & Electrical Spontaneous Combustion Vaping & E-cigarette Battery Failures Fire Control & Explosion Issues

Agriculture Tractor & Equipment Accidents Chemical Applications & Exposures Crop Storage & Harvesting Accidents Pesticides Construction Vehicle Visibility Accidents Slip, Trip, & Fall Accidents Power Tool Repetitive & Immediate Injuries Scaffolding - Cranes - Hoisting - Fork Lifts Insurance Subrogation & Forensics Accident Investigations Electrical & Fire Causation Chemical Leakage Damage Defective Equipment Injuries Premise and Process Damages

James M. Miller, PE, PhD – Founder  Dr. Miller is an Emeritus Engineering Professor at the University of Michigan. He has directly served in Washington originating several Federal OSHA safety regulations, and interacts regularly with CPSC regarding safety and product recalls. Dr. Miller often works on projects relating to compliance with occupational safety standards, provides upper management guidance on product design, recall and liability issues, and serves as an expert witness.

Mark R. Lehto, PhD – Co-Founder Dr. Lehto is a Professor of Engineering at Purdue University. He completed his Ph.D. in engineering at the University of Michigan, where he specialized in Human Factors Engineering, in particular Warnings and Labeling. Dr. Lehto specializes in knowledge engineering, warnings and instructions, structuring expert systems, accident modeling, accident statistical analysis, consumer product safety, boating safety, in-field national surveys of product usage, and product information effectiveness.

David R. Clark, PE, PhD – Co-Founder Dr. Clark is an Emeritus Engineering Professor at Kettering University. He was an engineering PhD graduate from the University of Michigan, where he specialized in human factors engineering and system safety analyses. He has a special expertise in electrical fire- and explosion-related accidents, and has extensive experience working for loss control companies, performing over 150 fire origin and cause investigations in the past few years.

Adam M. Olshove, PE, MSE – Engineering Manager Mr. Olshove has over 10 years of experience providing consulting services to industry and the legal profession. He holds an MS in Mechanical Engineering with a focus on control systems and battery modeling (2019), and a BS in Mechanical Engineering (2012), both from the University of Michigan. He has performed dozens of on-site investigations nationwide in relation to consumer product design and industrial accidents, including failure analysis and testing.

Jeffrey D. Rupp, MSE – Engineering Associate Mr. Rupp has a BS in mechanical engineering from the University of Michigan and a MS in systems engineering and engineering management from Wayne State University. Among his company affiliates is 26 years with Ford Motor Company and Volvo Car Corporation, where he was involved in crash development and crash sensing calibrations.

Meyer R. Rosen, FRSC, FAIC, CPC, CChE, is a leading creative consultant for the Legal Profession and specialty Chemical / Personal Care Industries. He is the Founder & President of Interactive Consulting, Inc. (www.chemicalconsult.com). 

Meyer is a Forensic Litigation expert for both plaintiff and defense in hazardous chemicals, products liability, personal injury, fires and explosions, intellectual property and trade secret cases. He also provides Technical Marketing, New Business Development, Technical Consulting and Professional Editing services internationally to the Specialty Chemical, Personal Care, Cosmetic, Pharmaceutical, Medical Device, and Allied Industries. 

Meyer also has 15 years of experience as a Professor of Fire Technology at Westchester Community College. Mr. Rosen is Editor- in- Chief of Harry’s Cosmeticology, 9th Ed. A 2,600-page trilogy on all aspects of the cosmetic industry (www.harryscosmeticology.com)’ as well as being Emeritus-Editor-in-Chief for EuroCosmetics magazine (Germany) and Editor-in-Chief of the Delivery System Handbook. 

Technology Expertise (Intellectual Property/Chemical Industry): Mr. Rosen provides consultation and litigation support in patent infringement, trade secret issues, and licensing matters. His scientific areas of expertise include, but are not limited to:

• Organosilicones: Surfactants, Emulsions, Foams, Antifoams, Silane Coupling Agents
• Water Soluble Polymers, Poly(ethylene oxide), Polyethylene Glycol, and Poly (acrylamide) and Water Insoluble Polymers
• Colloid and Surface Chemistry: Stability of Dispersions, Wetting & Spreading Phenomena, Suspensions & Emulsions, Clays, Paint & Coatings, Personal Care, Cosmetics
• Flocculating and Coagulating Agents
• Applied Rheology, Rheology Modification of Aqueous & Non-Aqueous Media

Certifications:

• Chartered Chemist and Fellow: Royal Society of Chemistry – London
• Nationally Certified Professional Chemist and Professional Chemical Engineer
• Fire and Explosion Expert (Advanced Training)
• Fellow: American College of Forensic Examiners
• Fellow: American Institute of Chemists
• Diplomate: American Board of Forensic Examiners
• Diplomate: American Board of Forensic Engineering and Technology

View Meyer Rosen's Consulting Profile.

Dr. David W. Riley is an Extrusion Analysis & Plastics Rheological Consultant. Dr. Riley has spent over nineteen years as a consultant in the field of Plastic Processing. He has over forty years of experience in developing Polymer Defect Technology and fifteen years in developing the field of Plastic and Polymer coefficient of friction related to the feed section of the extruder.

Areas of Expertise:

• Expert Witness
• Analytical Instrumentation Adaptation to Processing Equipment
• Friction Analysis
• Melt Rheology
• Extrusion Equipment: Design & Analysis of Production
• Telecommunication Cables and Insulation
• Power Cables and Testing XLDPE
• All phases of PVC Compounding & Extrusion
• Thermal Stability of Polymers
• Surface Chemistry, Metals & Polymers

John A. Williams, PhD, PE, CFEI, MBA, ASA, AIChE Fellow. 

Dr. Williams delivers Technology Assessments and Financial Valuation Analysis for business disputes involving intellectual property, trade secrets, patent infringement, licensing, royalties, capital investment, manufacturing operations expenses, ad valorem taxes, and lost profit calculations. He is an Accredited Senior Appraiser by the American Society of Appraisers, 

Practical 40 years of engineering experience in renewable and conventional energy technologies and facilities encompassing oil & gas, refining, biofuels, biomass, solar, wind, geothermal, coal, chemicals, steel, and power generation. A NAFI Certified Fire and Explosions Investigator, Dr. Williams performs forensic investigations of fires, explosions, equipment failures, and industrial accidents. 

Dr. Williams is a licensed Professional Engineer in the States of Alabama, California, Florida, Illinois, Indiana, Kentucky, Louisiana, Massachusettes, Michigan, Missouri, North Carolina, Ohio, Oklahoma, South Dakota, Texas, Utah, Virginia, Washington, and Wisconsin.