Accident Prevention and Safety Expert Witnesses: 59

Richard "Pete" Burgess provides service as an Aviaton Consultant for air traffic services, procedures, pilot experience and aircraft accident investigations. Mr. Burgess has been the Owner of Burgess Aviation Consultants since 1994 and specializes in the analysis of FAA Air Traffic Control service and the application of procedures in the following areas:

• Air Route Traffic Control Centers (ARTCC's)
• Airport Traffic Control Towers (ATCT's)
• Terminal Radar Approach Control Facilities (TRACON's)
• Automated Flight Service Stations (AFSS's)
• Detailed Transcript Preparation of Air Traffic Recordings

Mr. Burgess is an Instrument-Rated Commercial Pilot and Certified Flight Instructor for Multi/Single Engine airplane. He has over 4000 hours of flight time. 

EXPERIENCE

     5/94- Present   Burgess Aviation Consultants begins the twenty-fifth year specializing in the review and analysis of air traffic procedures in Air Route Traffic            Control Centers, Contract Control Towers, Airport Traffic Control Towers, Terminal Radar Approach Control’s and Automated Flight Service Stations.                  Have provided services as an Aviation consultant in over 276 different cases during the past twenty-four years. I have been deposed in 82 cases and testified          in 34 trials

      1972 to 1994 Air Traffic Control Supervisory and Management - FAA

• Managed and supervised the National evaluations of over 160 FAA air traffic ARTCC's, ATCT's, TRACON's and AFSS's facilities in Southern California, Nevada, Arizona, New Mexico, Missouri, Kansas, Texas, Oklahoma, Louisiana, Mississippi and Alabama
• Qualified on all positions of operation and actively controlled traffic as supervisor and manager at El Paso and Little Rock ATC Tower and radar approach control facilities
• Served as consultant and expert witness in trials involving aircraft accidents and enforcement actions in St. Louis, Kansas City and Little Rock
• Investigated the application and effectiveness of air traffic control procedures at Dallas/Fort Worth, Los Angeles and Kansas City Airports, as a result of major accidents at those airports
• 1957 to 1972 Air Traffic Controller - FAA & U.S. Navy
• Air Traffic Terminal Controller at NAS Saufley Field, Pensacola, FL and NAS Guantanamo Bay, Cuba, in the U.S. Navy, and Santa Fe, NM in the FAA
• Flight Service Specialist in El Paso, TX. Santa Fe, NM and Lubbock, TX
• Air Traffic Tower and Radar Approach Controller in Lubbock, TX and San Antonio, TX

Anthony S. Boom is an Electrical Engineer and Escalator Controls Expert Witness with over 35 years in the escalator business. Currently providing expert witness services though Cetek, Inc., he spent the last three decades working as an Electrical Engineer with Montgomery Escalator and KONE R&D, escalator division.

Three patents Mr. Boom received while working at Montgomery and at KONE include one for Safety Switch and Method of Checked Redundancy, utilized in all of the current transit escalator safety circuits; an Apparatus and Method for Variable Torque Braking of Escalator and Moving Walkways; and a Method and Conveyor System for KONE Sleep Mode Controller.

Litigation Support - Mr. Boom offers expert witness services to attorneys representing plaintiff and defense. Services include expert witness testimony, written or oral affidavits, site inspections, technical investigations, technical review documentation, etc. 

Areas of Expertise:

Electrical Engineering Escalators Vertical Transportation Electrical Controls Escalator Control Circuitry Logic Escalator PLC Control Software Program Logic

Escalator Brake Control Escalator Braking Systems Escalator Safety Escalator Safety Circuits Moving Walkways National Electrical Code

Background Experience and Accomplishments:

• Designed and developed many custom escalator electrical controls. He also designed and wrote the code for Montgomery Escalator and KONE escalator controls, including the controls for the Trans 180 escalator platform (the ES373’s model).
• Developed diagnostic guides for escalator controllers and braking systems and technical bulletins for all aspects of the escalator electrical control system.
• Oversaw the CSA certification of the escalator control and brake systems.
• Supervised and trained electrical and mechanical engineers.
• Provided tech support to KONE personnel regarding Otis controls and performed power studies on a variety of Otis escalators. 

Selected Case Experience:

• 2022: Escalator at department store, PA: Alleged injury on escalator.
• 2023: High rise transit escalator, NY: Ongoing.
• 2023: Public transportation escalator, NY: Ongoing.  See CV for Full List

Thomas J. Young, PE, has over 39 years of experience in national and international Transportation Construction, the Civil Engineering specialty regarding highways, bridges, rail, airports, harbors, and associated infrastructure.

Mr. Young is a skilled integrator of the parameters of program and project life cycles, leadership, management, business operations, engineering and construction. He has extensive knowledge of regulatory compliance, environmental processes, industry standards, best practices, and field operations in urban and remote areas.

Mr. Young has broad construction management and design background for many of the knowledge and skill areas required in mining operations, bridges, highways, land development, major soil/structure type facilities, land survey, and construction surveying, including work in Arctic facilities and in desert regions.

Selected Background Experience:

• Completed 34 bridge structure designs, seismic retrofits, and special studies, including large cut and cover tunnels and numerous other complex structures for the $700 million design/build Eastern Transportation Corridor toll roads in Orange County, California
• Bridge construction oversight on $1 billion Cypress Corridor reconstruction in Oakland, California. 
• $10 million Sunrise/Highway 50, and $40-$50 million Douglas/Interstate 80 Interchange and Corridor designs in Sacramento, California.
• Bridge and highway project development duties in Caltrans Districts 1-5, 7, 10-12.

Thomas J. Young: PowerTeam Interview

Litigation Support - Mr. Young can act as an expert witness in all cases related to Forensic Transportation Construction Engineering. A persuasive communicator skilled at negotiating successful outcomes to complex situations, his expertise at analysis, problem solving, and bringing parties together in the public and private sectors is an asset in his performance in forensic engineering and expert witness testimony.

Areas of Expertise:

ADA Violations Architecture Bridges Building Codes Civil Engineering Construction Accidents Construction Claims Construction Defects Construction Failure Analysis Construction Injuries Construction Safety / OSHA Cost Estimating / Overruns Design Codes Design Engineering Drainage Driving Human Factors Engineering Quality Assurance Fall Protection Forensic Engineering Investigation Geotechnical Engineering Highway Engineering

Highway Safety Hydraulics and Drainage Hydrology Industrial Facilities  Land Development Land Surveying Landscape Architecture Management Professional Responsibility Public Works Sewers Signage Strategic Planning Structural Engineering Structural Engineering  Failures Surveys Temporary Structures Traffic Safety Transportation Transportation Construction

View Civ-Tek International's Business Consulting Profile.

Jayson Uribe, Vehicle Investigator, is an active Firefighter with the Napa County Fire Department, as well as a professional Driver and Instructor at Sonoma Raceway and the Allen Berg Racing School at Laguna Seca. 

Mr. Uribe owns and operates a private investigation company, Code 3 Consultations specializing in professional driver coaching, autonomous research and development, vehicular analysis, scene recreation, motorcycle accidents, and expert witness testimonies. In a consulting capacity, he has worked with such companies as Allen Berg Motorsports (ABMS), Sears Point Racing Experience (SPRE), Skip Barber Racing Schools, American Supercamp (ASC), Waymo Technologies, Faction Tech Co., Mercedes-Benz USA/GER, etc.

Heavily involved in the motorsports industry for almost 20 years, he has in-depth knowledge and first-hand experience with any and all modern safety systems and how they operate. He has the mechanical knowledge to be able to decipher the validity / integrity of a potentially compromised system which may have been associated with an incident.

From a driver standpoint, Mr. Uribe uses his experience as a performance driving instructor to properly break down and analyze the actions taken by an individual to determine if any malicious intent was involved. Essentially, he is the one you call when you have a traffic accident that requires more than just an on-scene report from an officer. 

Litigation Support - With nearly 20 years in the motorsports industry, 5 years in accident recreation and autonomous vehicle R&D, and 8 years in a coaching / teaching role, Jason Uribe is uniquely qualified to assist in complex accidents. His services include on-site accident investigation, thorough reporting, depositions, and trial testimony as needed.

Areas of Expertise:

Motorcycle / Vehicle Accident Analysis Accident Scene Recreation Vehicle Safety Systems and Operations R&D for Autonomous Vehicles

Safety Training for Emergency Vehicles Safety Training for Private Security Details Stunt Driving Train the Trainer

View Jason Uribe's Consulting Profile.

" WHO IS AN EXPERT?
ONE WHO HAS ACQUIRED COMPREHENSIVE SPECIFIC EDUCATION,
ADVANCED AND CONTINUING TRAINING, AND EXTENSIVE SPECIFIC
EXPERIENCE TO GAIN THE KNOWLEDGE AND AUTHORITATIVE ABILITIES
REPRESENTING THE MASTERY OF THE SPECIFIC FIELD AND OF THE SUBJECT."

Nation Wide and International Expertise.

Timothy G. Galarnyk: Educated in Construction and Safety.  Continued Training in Construction and Safety. More than 45 Years of HANDS-ON Field Experience. Actively involved in construction since 1976. Equipment operator, member of International Union of Operating Engineers since 2004, Certified by ATSSA in Construction Work Zone Traffic Control - MUTCD since 1988. More than 1,000 Incidents Independently Investigated. 

Traffic Crashes in Construction Work Zones - Related to MUTCD Compliance. CERTIFIED by ATSSA in Work Zone Traffic Control since 1988. 

Construction Risk Management, Inc., is a corporation with experts in construction safety, structure collapses, construction means and methods, and construction work zone traffic control.  Investigation focuses on:

Bridges, Buildings, Residential, Industrial, Commercial, High-Rises, Marine, Highways, Underground, Water, General and Subcontractor Issues

Litigation Support - We conduct Forensic Investigations of Construction Accidents / Injuries / Deaths to establish the Cause. What happened? How did it happen? Where and When did it happen? Why did it happen? Who is Responsible? Depositions and Trial Experienced. State and Federal Courts. Defense and Plaintiff - Makes no difference as the case facts and evidence rules. 

Areas of Expertise (include but not limited to):

Scaffolding Cranes Rigging Earth Moving Equipment Aerial Lifts Forklifts Trenching / Excavating Falls Steel Erection Electrical Injuries / Electrocution

Confined Spaces Concrete Work OSHA Issues Bridge / Building Structural Collapse Trucking of Construction Material Steel Materials Reinforcing Bars Concrete Pilings Loading / Unloading Injuries

DNA Industrial Hygiene CSLB 773462 1A,HAZ is an occupational/environmental health & safety firm providing comprehensive industrial hygiene/environmental services. Dan Napier is the 'go to' person for help with your health & safety program. if you are a small business or one of the fortune 500's DNA has helped someone like you. whether you need a simple survey for a single issue or a complex benchmark or safety audit they have the experience and expertise to do the work. Mr. Napier provides services to the legal community. please check with him for trial assistance, forensic studies or expert witness services. he has been designated as an expert and has testified in federal and state courts.

Dean Tekell Consulting provides expertise in the areas of Traffic Engineering, Parking, Public Transit, Vehicle Dynamics, Accident Reconstruction, and Technical Accident Investigation.

Often, government agencies, consulting engineers, architects, developers, business institutions, and attorneys must know how to move people and their goods safely and efficiently. The firm offers advice on site selection, traffic access, and traffic circulation on the site. The firm provides insight into potential problems with zoning and subdivision regulations. Traffic impact studies, traffic signal warrant analysis, traffic signal design and permitting services related to development activity are also available through the firm. Parking garage and parking lot operations are specialties offered to business institutions.

Other services include: Queuing Studies for drive-through services; Traffic Calming and neighborhood speed control; School trip and pedestrian safety plans; Traffic Accident Reduction and highway safety techniques; Transit Funding Operation; Intelligent Vehicle-Highway Systems.

Michael T. Motley, Ph.D. has over thirty-five years of experience in the fields of Communication & Psycholinguistics. Dr. Motley serves as an expert witness for opinions on the  clarity, lack of clarity, and most likely interpretation of common messages such as  warning labels, instructions, advertising, contracts, waivers, and so forth. He has served on over 30 cases; about 2/3 for plaintiff and 1/3 for defense. Dr. Motley is a Professor Emeritus of Communication at the University of California at Davis. He has authored almost 200 books, articles, and research papers in communication and psycholinguistics. He has won eighteen excellence awards for his research and was recognized as among the "Top 1%" of communication scholars of the 1970's, 1980's, and 1990's. Areas of Expertise:

• Communication Messages: Meaning, Ambiguity, Likely and Alternate Interpretations, Communicative Intention
• Adequacy/Inadequacy of Messages: Product Warnings, Instructions, Waivers, Advertisements
• Male / Female Misunderstandings: Sexual Consent/Resistance, Date Rape

Services Offered:

• Expert testimony & Consultation
• Opinion on Adequacy of Communication Messages
• Opinion on Likely Consumer Interpretation of Warnings, Instructions, Advertising
• Opinion on Likely Intrepretation of Sexual Resistance/Consent Messages and Behaviors
• Social-scientific testing of expert opinion (his and others')

View Consulting Profile.

Donald L. Hess, President of DLH Associates, Inc., has been providing expert witness services to attorneys and other clients, including Analysis of Vehicle Crashes since 1996. His specialty is crashes involving Commercial Motor Vehicles, including trucks, tractor-trailers, and buses.

With well over two million miles of safe cross-country trucking experience, followed by over 20 years as a driver trainer and creator / administrator of commercial driving programs, Mr. Hess is well-qualified to provide analysis of what drivers are trained to do in specific situations and circumstances, what federal and state regulations call for and require, and all aspects of the safe and proper operation of commercial motor vehicles. As a motorcyclist with over 45 years of riding and training experience, he is also qualified to comment on accidents involving motorcycles.

Mr. Hess has been nationally-recognized as a leader in safety and training issues, is a winner of the American Trucking Associations Million Mile Driving award, and was a winner of the Truckload Carriers Association Lee Crittenden award. Over his long and successful career in trucking and education, he has held numerous national board and officer positions in trucking and education.

Litigation Support - Mr. Hess is uniquely qualified to analyze and comment on driver behavior in virtually any situation, and has established a solid reputation as an expert witness in crashes involving trucks and commercial vehicles for both Plaintiff and Defense in over 500 hundred cases across the country since 1996. His experience includes significant deposition and trial testimony.

He possesses a unique combination of training, hands-on experience, and education that combine to position him as a leading expert in all facets of trucking. Mr. Hess still maintains a valid, current Commercial Driver License fully endorsed for Combination Vehicles, Doubles-Triples, Tankers, Hazardous Materials, Motorcycles, and Buses. He also holds a USDOT Medical Exam Certificate. His CDL and medical certificate have been maintained without interruption or fault since 1971.

Areas of Expertise:

Commercial Driver Training Truck Driver Training Federal Motor Carrier Safety Regulations Commercial Driver Theory Commercial Driver Backing City Driving Federal Hours of Service Requirements

Highway Driving Extreme Weather Operations Live Skid Pad / Skid Prevention and Recovery Emergency Driving Skills Warehouse Issues Loading Dock Issues Forklifts

H. Landis “Lanny” Floyd II, PE, CSP, CMRP, CRL, CESCP, Life Fellow IEEE, has over 45 years of experience in Electrical Safety in the Workplace. His work has advanced the application of Human Factors Engineering, Electrical Technology, and Safety Management Systems in preventing occupational electrical injuries. Mr. Floyd retired from DuPont in 2014, holding the positions of Principal Consultant - Electrical Safety & Technology, and Global Electrical Safety Competency Leader. 

Click here for my current CV

Background Experience - For the past 35 years, Mr. Floyd focused on electrical safety in the construction, operation, and maintenance of industrial and commercial facilities worldwide for DuPont. This included safety management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance. From 1992 to 2014, he led the team that designed and facilitated implementation of a strategy for continuous and sustainable improvement in occupational electrical safety for DuPont Global Operations. This work enabled breakthrough performance in prevention of serious injuries and fatalities from electrical energy in DuPont facilities worldwide. In 2013, Mr. Floyd was invited to join the faculty at the University of Alabama at Birmingham, where he teaches in the Advanced Safety Engineering and Management Master of Engineering degree program. 

Litigation Support - Mr. Floyd has been providing expert witness services and litigation support for over 10 years. His expertise is available to counsel representing both plaintiff and defendant. Mr. Floyd's services include consulting, site inspections, testing, reports, depositions, and trial testimony when necessary. 

Areas of Expertise:

Workplace Electrical Safety Electrical Shock Arc Flash Electrical Safety Management Systems Electrical Codes and Standards NFPA70E & National Electrical Safety Code National Electrical Code Electrical Testing Instruments

Electrical Injury Electrocution Electrical Reliability Electrical Maintenance Electrical Construction Occupational Electrical Safety Electric Power Systems Overhead Power Lines

View Lanny Floyd's Consulting Profile.

Envista Forensics is a global leader in Forensic Engineering & Recovery Solutions. They provide Cause & Origin, Failure Analysis, Fire and Explosion Investigations, Accident Reconstruction, Damage Evaluations and Equipment Restoration Services following disasters of all kinds. Envista has offered Consulting Services to the insurance, legal and risk management industries, as well as businesses, public entities, and universities for over 25 years.

Their Experts travel globally from 30 offices located across the U.S., Canada, Mexico, the U.K., Australia and Singapore. Envista's experience counts when equipment, systems, structures, or data have been threatened by catastrophe or litigation. Their experts and advisors determine cause and responsibility, and identify the nature and extent of damage or loss and provide a full range of solutions to protect their assets.

Envista's technical professionals are trusted advisors and industry leaders. Their expertise is broad and deep, capable of withstanding all forms of scrutiny. Envista's services are available globally so that certainty is assured no matter where in the world it is needed. As the recovery from disasters has grown more complex, Envista has developed a comprehensive array of services to help their clients and has associates located around the globe to provide assurance no matter the type of loss or location of the disaster. Envista helps attorneys quickly get to meaningful answers on the many technical issues at the center of a dispute. Their engineers have decades of experience working with both defendants and plaintiffs.

They offer effective Expert Witness Testimony, with the ability to communicate effectively, build rapport with juries and judges, and maintain adherence to structured, methodical approaches in drawing conclusions are all extremely critical. Envista Forensics understands how critical the selection of an expert can be, and we understand what makes experts effective. Their court qualified experts have extensive experience providing expert testimony on a wide variety of engineering and technical matters.

Areas of Expertise:

Aviation & Aerospace Biomechanics Construction Defects Digital Forensics Electrical Injury & Electrocutions Causation Chemical Computer / Network Equipment Failure Construction Defect Disputes over Reparability of Damage Electrical Failure Equipment Restoration Fire & Explosion Analysis Equipment Restoration

Industrial / Manufacturing Equipment Materials Failure Mechanical Accidents Mechanical Failure Medical / Laboratory Equipment Product Failure / Liability Project Management Structural Failure Subrogation Utility & Energy Valuation of Structures or Equipment Vehicle Accident Investigation Workplace / Premises Accidents

View Envista's Consulting Profile.

Albert Ferrari, PE, CSP. is a Mechanical Engineer and Safety Professional experienced in both the micro and in the macro focus. Mr. Ferrari is particularly sensitive to reliability, safety, and function. His Forensic Engineering experience includes 30+ years in Accident Reconstruction, Causal Analysis, Failure Analysis, Codes, Standards and Regulations, Consulting and Testimony.

Mr. Ferrari provides Expert Witness Consulting and Testimony services to Defense attorneys, Plaintiff attorneys, Claims adjusters and Insurance companies. 

Engineering Work Includes:

• Automotive Engineering
• Pedestrian Facilities
• Machine Design
• Thermal and Mechanical Energy Analysis
• Structural Load and Stress Analysis
• Piping and Tanks
• System Safety and Human Factors Analysis for Design of Hazardous Equipment

Evaluations Include

• Cause of Injury, Loss and Damage
• Adequacy of Products, Systems, Materials, Practices
• Standard of Care of Design, Manufacturing, Use, Maintenance

Services Include:

• Investigation and Consultation
• Diagnostics, Testing and Analysis
• Technical Photography and Video
• Literature and Standards Studies
• Codes and Regulations Analysis
• Reports and Testimony
• Evaluations

Ken Tannar’s Golf Expertise is unique in the legal world. As an Errant Golf Ball expert, Mr. Tannar can analyze and give advice on potential damage produced by errant golf balls. With an increase in residential developments built around golf courses, errant golf balls will almost certainly cause damage to property and/or persons. 

Mr. Tannar provides litigation support services on all cases involving golf club / ball interactions. Having consulted on over 70 cases, he uses a highly accurate golf ball projectile model, Mr. Tannar can determine the “zones of danger.” including:

Golf Netting Safety Height - Topographic Errant Ball Analysis - Adjoining Property Errant Golf Ball - Safety Determination

Mr. Tannar has been providing expert advice to golf courses, driving ranges, residential properties and the courts for since 2000. He has advised on cases in Australia, Canada, Norway, Spain, UK and many of the US States.

Prof. Makarand (Mark) Hastak, PhD, PE, CCP, CRIS, is the Professor and the Dernlan Family Head of Construction Engineering and Management as well as Professor of Civil Engineering at Purdue University. Dr. Hastak has been involved with the construction industry for the past 35 years providing his expertise through consulting, research, teaching, and service to the industry. 

Dr. Hastak is a world renowned expert in the area of construction engineering and management including risk management, profitability of Construction companies, process improvement, disaster risk reduction, resilience and capacity building, infrastructure management, intelligent planning for the built environment, project control, project management decision-making, and strategic planning. As a Fellow of the American Council on Education (cohort of 2013-14) at Cornell University his work focused on the various facets of Hybrid RCM budget, engaged institution, and Public-Private Partnership in academia.

Dr. Hastak is a Professional Engineer (PE), a Construction Risk Insurance Specialist (CRIS), and a Certified Cost Professional (CCP). He  has worked on numerous projects sponsored by the Construction Industry Institute (CII), NSF, State DOTs, and City Agencies. He is the current President of CIB (International Council for Research and Innovation in Building and Construction) and the Chair of the Advisory Board of teh Global Leadership Forum for Construction Engineering and Management programs (GLF-CEM). He also serves as an Academic Advisor to the Downstream and Chemicals Committee of the Construction Industry Institute (CII).

Dr. Hastak  has authored over 200 publications in his areas of expertise. He has co-authored a widely used book on Infrastructure Planning, Engineering, and Economics (McGraw-Hill 2006 and 2015). Dr. Hastak served on the Education Board of the Association for Advancement of Cost Engineering (2004-2016). He was Editor for two AACE books, the Skills and Knowledge of Cost Engineering (6th Ed. 2015) and the CCP Certification Study Guide (2nd Ed. 2016). He was also the Editor-in-Chief of the ASCE Journal of Management in Engineering (2009-2016). 

Dr. Hastak has given over 50 keynotes and invited lectures around the world. As a prominent educator and consultant, he also engages in developing training material and workshops as well as regularly teaching professional courses for the A/E/C industry. His services include consultation, on-site investigation, data collection, assessment, and reporting. He has completed the 30-Hour OSHA Hazard Recognition Training for the Construction Industry 

Dr. Hastak Lectures at the 2015 International Conference on Building Resilience

Litigation Support - Dr. Hastak offers expert witness services to attorneys representing both plaintiff and defendant. He has served as an Expert Witness on twenty-six (26) cases since 2017 and was deposed on eight plus two evidence depositions. His services include case reviews, written reports, depositions, and trial testimony as needed. 

Areas of Expertise:

Construction Engineering Construction Management Cost Overruns Schedule Delays Construction Safety/OSHA Modular Construction Patent Infringement

Factory Built Construction Infrastructure Planning Data Center Construction Project Risk Management Disaster Recovery / Disaster Mitigation Trade Secrets Misappropriation Contracts & Warranties

View Dr. Hastak's Consulting Profile.

Harvey C. Voris’ entire engineering career has been devoted to the Fitness Industry. He has over 35 years of Fitness Equipment Design experience and has been issued 7 U.S. utility patents. Mr. Voris has a Bachelors of Science in Engineering from UCLA with a specialization in Bio Structural Mechanics. 

Mr. Voris' Masters in Engineering is from Cal State Long Beach where he specialized in Fatigue and Failure Analysis. He has spent 21 years devoted to the development and promotion of safety standards for the fitness industry. Mr. Voris has authored numerous standards and has chaired the ASTM committee devoted to fitness standards development since 1995. 

Litigation Support - Mr. Voris provides engineering analysis and accident reconstruction related to consumer and fitness products and facilities. His services are available to attorneys representing both plaintiff and defense. With 35 years of experience, a biomechanics background, and extensive experience in design and product testing, Mr. Voris speaks with authority on the following critical issues:

Product Liability - Patent Development - Patent Infringement - Facility Risk Management - Standards Compliance

View Harvey Voris' Consulting Profile.