Construction Safety Consultants: 18

Landscapes West has focused on the design, installation, and maintenance of residential and small commercial landscapes since 1973. They specialize in the Design/Build of all phases of landscape construction, including a wide range of hardscape surfaces, including brick, natural and synthetic stone, interlocking and permeable pavers, and specialty concrete finishes and colors. 

Services:

Principal, Stephen George, has over 40 years of Landscape Design and Construction Defect experience. Mr. George has owned and operated Landscapes West since 1980, and is still providing design / build and maintenance services to his clients. His projects have included commercial, apartments, condominiums, and residential landscapes. 

Mr. George is a member of the California Landscape Contractors Association (CLCA), the Forensic Expert Witness Association (FEWA), the Irrigation Association (IA), the International Society of Arboriculture (ISA), the National Concrete Masonry Association (NCMA), the Interlocking Concrete Paver Institute (ICPI), and the Better Business Bureau (BBB) with an A+ rating. 

View Stephen George's Expert Witness Profile.

Ronald Tyson is a Building and Premises Expert in the construction business for over 45 years.  He has years of hands on experience in the individual trades as a tradesman, subcontractor and general contractor.  

Mr. Tyson has been a Michigan licensed builder since 1967 and has functioned as a general contractor and provided supervisory tasks for Tyson Enterprises, Incorporated and other contractors on all types of industrial, public, commercial and residential construction projects since 1963. He is a member of numerous building code and standard authorities, including but not limited to IBC [BOCA, UBC] NFPA, IAEI, NAHB, etc.

Mr. Tyson's experience and expertise can help clients with contracts, safety, and other obligations as they may affect project control of contractors and/or project managers.  He can advise on the duties in new and remodeling construction and maintenance required by the premises owner.

Litigation Support - Mr. Tyson has served the legal community as a Construction Expert Witness for 35 years. He has worked for both plaintiff and defendant attorneys. He is available to perform onsite inspections, research, review litigation matters, makes drawings, interview litigants, and provides evidence for court, including correct building code and life safety statutes and standards as they may affect personal injury claims, construction, contracts, etc. and causation.  Mr. Tyson has never been disqualified in over 200 times in court.

Areas of Expertise:

Litigation Support - Mr. Stein Offers consulting and expert services for attorneys on issues regarding road, street, highway, temporary traffic control, runway, and earthwork; asphalt, concrete, coatings and other construction materials; designs, plans, specifications, CPM scheduling (Primavera) and contract documents; right-of-way issues; and work zone safety. Licensed in Louisiana, Pennsylvania, and Texas, he performs contract performance forensic investigations and provides consulting, expert reports, rebuttals, and testimony if required.

Areas of Expertise:

Certifications:

• Certified Construction Manager (CCM)
• Certified Primavera Basic (CPM)
• Certified Primavera Advanced (CPM)
• Certified LADOTD Structural (bridge)
• Inspector/Technician Certified Troxler
• Humboldt Nuclear Moisture/ Density Operator
• Lead Abatement
• Certified Quality Compliance Surveillance in Fossil Power Plants, Organic & Inorganic Coatings Application and Inspection
• Certified Traffic Control Supervisor
• Certified Flagger Instructor

John D. Shepherd, RRC, RROis the principal of Shepherd Consulting Services, a Building Envelope, Roofing, Waterproofing, and Exterior Walls  construction forensic consulting firm, and the Building Envelope Institute, a firm that develops education programs for construction professionals (consultants, architects , engineers, con- tractors, etc.).

Mr. Shepherd has been consulting for more 26 years and has been active in the construction industry for over 50 years, including 10 as a roofing contractor. He is an IIBEC Registered Roof Consultant (RRC) and RRO, a Haag Certified Commer- cial/Residential Roof Inspector, and a certified building science thermographer. Over his career in the industry, Mr. Shepherd has conducted thousands of building envelope investigations including those related to leak investigations, construction defect, property assessment inspections, and property damage claims.

Through Thermal Imaging of America, a Division of Sheperd Consulting Services, Mr. Shepherd uses Thermal Imaging and various moisture meters to accurately locate the cause of moisture intrusion into a residential or commercial building. Mr. Shepherd is a noted author speaker in his field of expertise. He has been delivering presentations on Roofing and Waterproofing nationally for approximately 25 years. He has served on the board of directors for both RCI, Inc. and the SoCal Chapter of RCI, and has served on a number of committees in RCI/IIBEC and on ASTM International.

Consulting Services Include:

• Roof Surveys
• Replacement Cost Analysis
• Life Cycle Analysis
• Specification and Detail Review / Development
• Leak Investigations - Cause and Origin

View Expert Witness Profile.

Michael C. Wright, PE, CSP, CPE is a Professional Engineer with over 35 years of academic, practical, and specialized knowledge of Engineering, Construction, Safety, Maintenance, Demolition and Training in general industry and construction activities.

 Mr. Wright's expertise is a definite plus in providing clients with leading edge information and insight. A licensed and practicing engineer, he rounds out his knowledge as a Certified Safety Professional (CSP) and Certified Plant Engineer to provide an insightful and accurate understanding of the issues involved in a case.

Mr. Wright has completed over 600 hours of specialized safety training, serves on ANSI and ASTM Standards committees and provides a thorough knowledge of OSHA Regulations, Directives and Letters of Interpretation. A recognized author, presenter, and trainer, Mr. Wright communicates the issues clearly for all to understand. His expert witness experience is a balanced blend of defense, plaintiff and OSHA Solicitor cases. He is licensed in 46 states. 

Areas of Expertise:

View Mr. Wright's Curriculum Vitae

Rocky Mountain Safety Consulting, Inc. (RMSC), formulates effective and workable Safety Solutions tailored to unique business operations. A well-functioning, self-sustaining safety program avoiding incidents eliminates project slowdown, costly damage to equipment, tough questions from clients, and, most importantly, injury to employees. RMSC provides services to the construction, manufacturing, mining, and oil and gas industries. 

RMSC Consulting Services:

• Safety Programs - Draft and implement safety programs followed by training of crews and management. JSA's and JHA's, weekly safety talks focused on work tasks
• EHS Programs - Develop and implement safety audit programs complying with OSHA and MSHA standards
• Field Auditing - Create and implement field safety audit systems, tracking deficiencies, and correction timelines and accountability. Jobs Safety Analysis implementation

Principal, Greg Gerganoff, ASP, CSP, Esq., is an OSHA / MSHA Safety field and compliance expert in the fields of heavy construction, oil and gas, mining, pipeline, power plant outages, light rail construction, public schools, manufacturing, and trenching and excavation. 

As OSHA and MSHA are not mere “guidelines to safety” but federal laws enforceable in administrate hearings and federal courts, Mr. Gerganoff's 12 years of experience as a Licensed Attorney, and additional 17 years as a safety professional, make him uniquely qualified to research and interpret OSHA regulatory laws (29 CFR 1910 & 1926) and MSHA (30 CFR Part 46). He maintains his license to practice law in the state of Colorado. 

Safety Training includes but not limited to:

View Greg Gerganoff's Expert Witness Profile.

Rieser Building Group is a leading builder, engineer, architect, and forensic team with over 25 years of experience in management, design, and construction of over 4,000 units. These units range from custom homes, commercial buildings, and developments, to public works like Caltrans and BART construction, and roadway improvements (over 500 miles). With a full breadth of professional development services, they manage all aspects of a project, from entitlements to design to warranty.

Building Services - Design in-house, or, as licensed engineering and construction professionals, Rieser Building Group can manage an outside team of architects, civil engineers, structural engineers, and landscape architects.

Engineering and Design Services - Spearheaded by a professional Engineering & Architectural team, Rieser provides innovative designs and timely approvals in custom homes, commercial buildings, apartments, large developments, structures, topo-mapping, hydraulics, traffic engineering, and transportation engineering.

Development Services - Developing single custom-built home or a multiphase project, Rieser will expedite the development process, establish a joint venture to share costs, or purchase the project. In addition to flexible management, they conduct property feasibility studies to calculate the right mix of homes and maximize ROI. 

Mark E. Rieser, II, MS, PE, AIA, GBC, GEC, has over 30 years of experience in the Construction and Building Design industry. He provides his clients with a comprehensive knowledge of Construction Technology and Construction Standards of Professional Practice. Background Experience - President of an active Design / Build company, Mr. Rieser has managed, designed, and constructed over 4,000 units to include high-rise, single family homes, condominiums, townhomes, podiums, apartments, and commercial buildings, His experience includes construction, management, and design of over 500 miles of asphalt and roadway improvements, tunnels, San Francisco Airport, Santa Clara Light Rail, Southern Pacific Railroad, Caltrain, and BART. Mr. Rieser has an insightful understanding of Civil / Structural Engineering, Soil Engineering, Transportation / Traffic Engineering, Hydraulic Engineering, Architectural Design, Asphalt Design, Cost Estimation, Public Works Design Bidding and Estimation, General Engineering, General Building, and an Accident Reconstruction expert.

View Mark Rieser's Expert Witness Profile.

The four PhD and registered PEs at Miller Engineering are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. We have a dedicated office with a full time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise covers well the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering. The areas listed below are from actual projects completed in our 40 years of history. 

Dr. Eric N. Brown, CIH, CSP, is a Certified Industrial Hygienist (CIH) and a Certified Safety Professional (CSP), with both certifications in good standing with the issuing boards. Dr. Brown holds a Doctorate in Public Health with an Industrial Hygiene specialization from the University of California at Los Angeles, and a Master’s degree in Public Health with an Occupational Health specialization from the Medical College of Ohio. He has over 25 years of experience in:

• Health and Safety
• Industrial Hygiene
• Indoor Air Quality Exposure Assessments

Litigation Support - Dr. Brown has been a designated expert in hundreds of cases, been deposed over one hundred times, and has testified in both trials and arbitrations. His services are available to attorneys representing both plaintiff and defendant. 

Areas of Expertise:

Hastak Consulting Services is a Construction Engineering and Management firm established by Prof. Makarand (Mark) Hastak, PhD, PE, CCP, CRIS, Professor and the Dernlan Family Head of Construction Engineering and Management as well as Professor of Civil Engineering at Purdue University. Dr. Hastak offers consulting services to clients around the world in the following areas:

• Project Controls and Risk Management
• Process Improvement of Capital Projects
• Profitability Improvement and Construction Analytics
• Process Improvement for Factory Built Housing
• Capital Rehabilitation Planning
• Strategic planning and decision-making for resolving project complexities
• Planning for Disaster Mitigation, Resilience, and Capacity Building

Dr. Hastak has been involved with the construction industry for the past 35 years providing his expertise through consulting, research, teaching, and service to the industry. He is a world renowned expert in the area of construction engineering and management including process improvement, disaster risk reduction, resilience and capacity building, infrastructure management, factory built housing, intelligent planning for the built environment, project control, project management decision-making, risk management, contracts and warranties, and strategic planning.

Dr. Hastak is a Professional Engineer (PE), a Construction Risk Insurance Specialist (CRIS), and a Certified Cost Professional (CCP). Dr. Hastak has given over 50 keynotes and invited lectures around the world. As a prominent educator, he also engages in developing training material and workshops as well as regularly teaching professional courses for the A/E/C industry. He has completed the 30-Hour OSHA Hazard Recognition Training for the Construction Industry. His services include consultation, on-site investigation, data collection, assessment,and reporting.

Dr. Hastak Lectures at the 2015 International Conference on Building Resilience

Prof. Hastak has worked on numerous projects sponsored by the Construction Industry Institute (CII), NSF, State DOTs, and City Agencies. He has authored over 200 publications on process improvement, project controls, capital rehabilitation planning, strategic planning, and decision-making. He has co-authored a widely used book on Infrastructure Planning, Engineering, and Economics (McGraw-Hill 2006 and 2015). 

Dr. Hastak is the current President of CIB (International Council for Research and Innovation in Building and Construction), He is also the academic Advisor to the Downstream and Chemicals Committee of the Construction Industry Institute (CII) and serves as the Chair of the Advisory Board of the Global Leadership Forum for Construction Engineering and Management programs (GLF-CEM). He served on the Education Board of the Association for Advancement of Cost Engineering (2004-2016). He was Editor for two AACE books, the Skills and Knowledge of Cost Engineering (6th Ed. 2015) and the CCP Certification Study Guide (2nd Ed. 2016). He was also the Editor-in-Chief of the ASCE Journal of Management in Engineering (2009-2016).

View Dr. Hastak's Expert Witness Profile.

Dr. Fari Barzegar is a Licensed Engineer with 37 years of experience in Civil and Structural Engineering & Construction Forensics, Construction Project Management, university teaching/research. He has been an Expert Consultant / Witness in over 100-cases.

Litigation Consulting Expert Witness with testimony and trial experience. Has been retained by insurance companies, law firms, construction, energy, mining, technology & manufacturing industries, governmental & educational institutions, engineering and architectural firms, property owners and individuals. Consultant in both plaintiff and defendant cases.

• Insurance Claims, Peer Reviews
• Buildings, Structures & Materials: Residential, Commercial, Institutional, Historic Structures; Bridges, Towers, Stacks/Chimneys, Containment Vessels, Tanks, Grain Silos, Conduits & Pipelines, Retaining Walls, Foundations, Slabs & Pavements; Concrete, Steel, FRP Composites, Wood, CMU, Brick Masonry & Adobe
• Design / Construction / Integrity issues, Seismic Resistant Design; Errors & Omissions;Standards of Care; Repair & Retrofit Design Documents
• Construction Defects & Accidents; Defective Concrete; OSHA Standards, Excavations / Trenching / Scaffolds
• Slip/Trip/Fall, Code Compliance
• Damage & Failure Investigation; Due Diligence; Non-Destructive Testing 
• Explosion, Impact, Earthquake, Wind, Fire, Hurricane & Flood Damage Inspections / Analysis/Report
• Pile Driving & Demolition Damage to Adjacent Facilities: Vibrations, Cracking / Settlement
• Dynamic, Fracture, Thermal & Finite Element Stress Analysis; Product Design; Failure Simulation / Reconstruction
• Intellectual Property & Patent Infringement

Expanded Resources LLC is a construction-related consulting firm with expertise in strategic business consulting and construction management training. 

Strategic Business Consulting

We help organizations manage their portfolios, programs, and projects more efficiently.

Approach Includes:

• Formulating strategies for change and improvement
• Solving problems through collaborative sessions
• Providing practical recommendations and helpful solutions
• Developing standard operating procedures, guidelines, and manuals
• Establishing key performance indicators
• Staff training

Construction Management Training 

We empower your team with the knowledge and skills they need to excel. Our training sessions are tailored to your requirements and framed around industry best practices and real-world experiences.

Training is provided in-person and virtually (synchronous or asynchronous) for all levels of learners in various roles, including senior and junior-level staff who work for private developers, contractors, and city agencies in project management, procurement, business, and workforce development. 

We are a Registered Continuing Education Provider authorized to provide Professional Development Hours (PDH) for qualified training sessions.

Kiwesa King, PE, CCM, DBIA, PMP, is a construction management consultant and expert witness engaged in the vertical construction market for nearly 30 years. She is a Licensed Professional Engineer and a Certified Construction Manager and Trainer. 

Ms. King has managed restoration, renovation, and ground-up construction projects as a designer, subcontractor, general contractor, and construction manager. She teaches graduate and continuing education courses in Construction Management at Fordham University and New York University.

Degrees and Certifications:

• New York State Licensed Professional Engineer
• Bachelor of Science and Master of Science in Mechanical Engineering
• Certificate of Competence- Master Fire Suppression Contractor - New York City Department of Buildings (NYCDOB)
• Site Safety Manager: NYCDOB
• Certified Construction Manager: Construction Management Association of America
• Designated Design-Build Professional:  Design-Build Institute of America
• Project Management Professional: PMI

View Kiwesa King's Expert Witness Profile.

Construction Strategies provides a complete range of Construction and Construction Consulting services. They offer pre-construction services for owners considering future projects who need assistance in evaluating the feasibility and conceptual costs. Construction Strategies also offers post construction services for owners who are facing close out problems including conflict resolution, mediation assistance, close out service completion, punch lists, and warranty assistance.

Principal, Sanford C. Loy , CCM, B.Arch, MSCE, has over 40 years of experience in the Construction Industry. Mr. Loy has Degrees in Architecture and Engineering. A Certified Construction Manager (CCM), he is committed to the Code of Ethics and Standards of Professional Practice established by the Construction Management Association of America. CCM is the ANSI accredited professional designation for construction management and is the gold standard for CM service providers in over 145 countries.

Background Experience - Mr. Loy's experience spans virtually every type of building and design process. His strength centers on his understanding of the dynamics and interactions of the various trades and professions unique to every building project. He has experience with Construction Management at Risk, Construction Management Agency, Design-build, and Design-bid-build. Having successfully managed the completion of over one billion dollars of construction, Mr. Loy served as a Regional Engineer for the American Institute of Steel Construction and as Director of Construction and Development for Belz Enterprises, the largest development company in Tennessee, before founding Construction Strategies in 1988.

See more at our website: https://www.construction-strategies.com

View Sanford Loy's Expert Witness Profile.

Complete General Contractors, Inc., is a licensed General Contracting Construction Firm working throughout the Southeast for insurance companies, property owners, property managers, attorneys, and municipalities. They specialize in the cost estimation and causation of large loss complex property claims. Services Include:

• Appraisal and Mediation Services - Fire, wind, flood, storm, hail, and water losses to residential, commercial, or industrial properties
• General Contracting Services - Restoration or general construction, commercial construction, or industrial construction projects all over the United States. Manage vendors and trades, handle project documents, and serve as an authority for project information to all parties throughout the construction process

John G. Minor, President of Complete General Contractors, is a third-generation Contractor and licensed instructor certified by the North Carolina Department of Insurance. He is a recognized expert on the costs and applications necessary to repair buildings damaged by manufacturer, builder liability, water damage or intrusion, mold, or asbestos. Mr. Minor has provided for the successful restoration of millions of dollars in insurance restoration, building failures, and difficult repairs originating from defective construction practices and materials such as fire, wind, water, mold and mildew. His services were in demand for restoration on custom buildings on Bald Head Island. In addition to managing the business of Complete, Inc., John Minor teaches classes on mold and mildew remediation and prevention through proper building practices to a variety of clients thru Lorman Educational Services and other professional trainers. View John Minor's Expert Witness Profile.

CLM Engineering Associates has the ability to provide a vast array of services to real estate brokers, developers, home purchases/owners. President of the firm, Craig L. Moskowitz, PE, is a Civil Engineer with extensive Construction Management experience on both commercial and residential projects. His firm handles commercial and residential building inspections as it pertains to warranty and pre-purchase inspections as well as to handle specific Structural or Civil Engineering issues related to a property. 

Experience: Mr. Moskowitz has performed safety inspections on both civilian and military projects through the application of OSHA regulations. He has designed drainage systems for the government while an officer with the United States military and done cost estimating for various projects exceeding $500 million. 

Mr. Moskowitz has designed document creation and management of high-rise construction in Manhattan. He has managed telecommunications projects for Verizon in Manhattan including CPM schedule creation and updating and directed and managed all water distribution system and sewer system work while working as a contractor to the New York City Department of Design and Construction. CLM are specialists in the following areas:

• Traditional Commercial and Residential Building Inspections
• Storm Damage Assessment, Analysis and Reporting
• Comprehensive Construction Management
• Cost Estimating for Projects Ranging from $50,000 to in Excess of $1 billion
• Construction Scheduling and Delay Analysis
• Building Code and Drawing Review

View Craig Moskowitz's Expert Witness Profile.