Construction Claims Consultants: 31

Isaak Technologies provides expert witness, consulting & training services in the areas of design, construction, procurement, implementation, commissioning and operations of information technology, telecommunications, network systems and critical data center facilities. Isaak Technologies provides clear solutions to complex challenges using best-practice forecasting, strategy & risk mitigation. 

Philip J. Isaak, PE, P.Eng., DCDC, RCDD, SMIEEE, has over 20 years of experience as a design & operations consultant & training provider, with a focus in the information technology, telecommunications & critical data center facility industries. 

In recognition of Mr. Isaak’s professional standing, the Officers & Board of Directors of the Institute of Electrical & Electronic Engineers (IEEE), the world’s largest professional association for advancement of technology, certified his election to the grade of Senior Member, a level only 9% of IEEE’s over 400,000 global members hold. 

Professional Services:

Litigation	IT & Telecommunications	Critical Facilities
IP, Trade Secrets, Contracts Design, Construction, Implementation Claims, Damages, Defects, Delays, Failure & Quality Control Analysis Failed System Analysis Unfulfilled SLAs Technical Investigations Claims Preparation & Analysis Expert Reports Settlement Opinions & Strategies Deposition & Trail Testimony	Needs Assessment, Gap Analysis & Audits Strategic Plans Design, Procurement & Implementation Management Business Continuity & Disaster Recovery Planning Capacity Planning & Forecasting Operations Planning Enterprise Architecture, Network Systems, Services & Cabling Infrastructure Planning Outsourcing Analysis & Planning for Colocation, XaaS or Cloud Services	Design Consultant, Contractor & Commissioning Vendor Qualification & RFP Development Reliability Analysis Design Peer Review Site Assessments & Planning Facility Assessments & Audits Space, Power & Cooling Capacity & Redundancy Planning Commissioning Management Standard Operating, Maintenance & Emergency Response Procedures

View Philip Isaak's Expert Witness Profile.

Indian River Construction Services, Inc., offers many services to Home Owners, Home Owner Associations, Property Managers, and Building Owners. The most licensed construction firm in the state of Florida, they consult on project and building plans to help determine suitability, feasibility and cost controls for:

New Construction - Construction Repairs - Construction Additions - Construction Remodeling - Real Estate Improvements

Indian River Construction also has extensive experience in performing Insurance Adjusting Services as Florida Licensed Public Insurance Adjusters. This means they work for you and not for the insurance company, allowing them to get the best possible insurance settlement from insurance claims, whether that be a fire, flood, or hurricane. 

Andrew Allocco, PE, Principal at Indian River Construction Services is a leading Construction Consultant, Florida Licensed Public Insurance Adjuster, and Real Estate Broker. With over 45 years of experience in his fields of expertise, Mr. Allocco's services are sought by individuals, corporations, developers, and law firms to oversee and advise on construction projects. He is the current owner of construction, real estate, and engineering consulting firms.

Background Experience - Mr. Allocco is the President of Indian River Construction Services, Inc. Prior to his current role, he served as the President of Better Homes Construction Services, Inc. of Miami, Florida, which performed in excess of 40,000 Building Inspections. A Forensic Consulting Engineer, he inspects Commercial, Residential, and Industrial Facilities before, during, and after construction. He assists property owners with complex insurance claims, some of which involve significant and lengthy litigation

Mr. Allocco is not only licensed in the State of Florida as a Professional Engineer and Licensed Public Insurance Adjuster, he holds more licenses both presently active and past than any other individual in the State, including:

BA, SUNY Maritime College, Marine Nuclear Engineering Florida Licensed Professional Engineer Florida Certified General Contractor Florida Certified Mechanical Contractor Florida Certified Air Conditioning Contractor Florida Certified Roofing Contractor

Florida Certified Plumbing Contractor Florida Certified Electrical Contractor Florida Certified Commercial Swimming Pool & Spa Contractor Florida Licensed Home Inspector Florida Licensed Solar Contractor Florida Licensed Real Estate Broker

View Andrew Allocco's Expert Witness Profile.

Hastak Consulting Services is a Construction Engineering and Management firm established by Prof. Makarand (Mark) Hastak, PhD, PE, CCP, CRIS, Professor and the Dernlan Family Head of Construction Engineering and Management as well as Professor of Civil Engineering at Purdue University. Dr. Hastak offers consulting services to clients around the world in the following areas:

• Project Controls and Risk Management
• Process Improvement of Capital Projects
• Profitability Improvement and Construction Analytics
• Process Improvement for Factory Built Housing
• Capital Rehabilitation Planning
• Strategic planning and decision-making for resolving project complexities
• Planning for Disaster Mitigation, Resilience, and Capacity Building

Dr. Hastak has been involved with the construction industry for the past 35 years providing his expertise through consulting, research, teaching, and service to the industry. He is a world renowned expert in the area of construction engineering and management including process improvement, disaster risk reduction, resilience and capacity building, infrastructure management, factory built housing, intelligent planning for the built environment, project control, project management decision-making, risk management, contracts and warranties, and strategic planning.

Dr. Hastak is a Professional Engineer (PE), a Construction Risk Insurance Specialist (CRIS), and a Certified Cost Professional (CCP). Dr. Hastak has given over 50 keynotes and invited lectures around the world. As a prominent educator, he also engages in developing training material and workshops as well as regularly teaching professional courses for the A/E/C industry. He has completed the 30-Hour OSHA Hazard Recognition Training for the Construction Industry. His services include consultation, on-site investigation, data collection, assessment,and reporting.

Dr. Hastak Lectures at the 2015 International Conference on Building Resilience

Prof. Hastak has worked on numerous projects sponsored by the Construction Industry Institute (CII), NSF, State DOTs, and City Agencies. He has authored over 200 publications on process improvement, project controls, capital rehabilitation planning, strategic planning, and decision-making. He has co-authored a widely used book on Infrastructure Planning, Engineering, and Economics (McGraw-Hill 2006 and 2015). 

Dr. Hastak is the current President of CIB (International Council for Research and Innovation in Building and Construction), He is also the academic Advisor to the Downstream and Chemicals Committee of the Construction Industry Institute (CII) and serves as the Chair of the Advisory Board of the Global Leadership Forum for Construction Engineering and Management programs (GLF-CEM). He served on the Education Board of the Association for Advancement of Cost Engineering (2004-2016). He was Editor for two AACE books, the Skills and Knowledge of Cost Engineering (6th Ed. 2015) and the CCP Certification Study Guide (2nd Ed. 2016). He was also the Editor-in-Chief of the ASCE Journal of Management in Engineering (2009-2016).

View Dr. Hastak's Expert Witness Profile.

Dr. Fari Barzegar is a Licensed Engineer with 37 years of experience in Civil and Structural Engineering & Construction Forensics, Construction Project Management, university teaching/research. He has been an Expert Consultant / Witness in over 100-cases.

Litigation-Support Consulting Expert Witness with testimony and trial experience. Has been retained by insurance companies, law firms, construction, energy, mining, technology & manufacturing industries, governmental & educational institutions, engineering and architectural firms, property owners and individuals. Consultant in both plaintiff and defendant cases.

• Insurance & Surety Claims, Peer Reviews
• Buildings, Structures & Materials: Residential, Commercial, Institutional, Historic Structures; Bridges, Towers, Stacks/Chimneys, Containment Vessels, Tanks, Grain Silos, Conduits & Pipelines, Retaining Walls, Foundations, Slabs & Pavements; Concrete, Steel, FRP Composites, Wood, CMU, Brick Masonry & Adobe
• Design / Construction / Integrity issues, Seismic Resistant Design; Errors & Omissions;Standards of Care; Repair & Retrofit Design Documents
• Construction Defects & Accidents; Defective Concrete; OSHA Standards, Excavations / Trenching / Scaffolds
• Slip/Trip/Fall, Code Compliance
• Damage & Failure Investigation; Due Diligence; Non-Destructive Testing 
• Explosion, Impact, Earthquake, Wind, Fire, Hurricane & Flood Damage Inspections / Analysis/Report
• Pile Driving & Demolition Damage to Adjacent Facilities: Vibrations, Cracking / Settlement
• Dynamic, Fracture, Thermal & Finite Element Stress Analysis; Product Design; Failure Simulation / Reconstruction
• Intellectual Property & Patent Infringement

Roger W. Griffith, PE, has over 37 years of professional experience as a Mechanical Engineer in the design, maintenance, and operation of mechanical systems. He specializes in the areas of Plumbing, HVAC, and Fire Sprinkler Systems Design.

Background - As the principal of Griffith Engineering & Consulting for 23 years, his design experience with commercial and industrial projects include convention centers, schools, office buildings, condominiums, apartment buildings, hotels, churches, manufacturing facilities, medical buildings, restaurants, historic buildings, dormitories, fire halls, and maintenance facilities. Prior to that, Mr. Griffith worked at the Tennessee Valley Authority (TVA) as a mechanical engineer for 14 years. 

His roles at TVA included nuclear piping analyst, valve and heat exchanger specialist, maintenance engineer, and later maintenance supervisor at a fossil plant, and quality manager. His engineering roles included failure analysis of plant equipment. He also taught many courses on the subject of problem-solving and failure analysis for company employees.

Consulting Services:

HVAC Design Plumbing Design Hot Water Systems Design

Legionella Outbreaks HVAC Design Carbon Monoxide Poisoning Sprinkler System Design

View Roger W. Griffith's Expert Witness Profile.

Expanded Resources LLC is a construction management consulting firm serving the legal and construction industries.

Expert Witness Services

At Expanded Resources, we bridge the gap between construction complexity and clarity. With decades of boots-on-the-ground experience—and a teaching background —we know how to translate multifaceted issues into easily understandable narratives. You’re not just getting an expert. You’re gaining a guide who understands and explains complex construction matters with clarity and conviction.

Construction Management Consulting

We help organizations manage their construction portfolios, programs, and projects more efficiently.

We start by listening. Through targeted interviews, surveys, and meetings with stakeholders at every level—from senior leadership to field staff—we uncover how your teams really operate.

We dig into your systems, documents, and workflows to pinpoint gaps, bottlenecks, and inconsistencies. Whether it’s outdated software, mismatched forms, or policies no one follows, we find what’s not working—and why.

Next, we deliver a clear roadmap tailored to your organization. Think of it as an operating manual, grounded in contract compliance and practical experience. 

Implementation isn’t left to chance. We build your team's capability through guided training, toolkits, and change support. Whether onboarding new project managers or retooling seasoned teams, we help embed the right habits across your organization.

Kiwesa King, PE, CCM, DBIA, PMP, is a Licensed Professional Engineer and a Certified Construction Manager and Trainer.

Ms. King has managed restoration, renovation, and ground-up construction projects as a designer, subcontractor, general contractor, and construction manager. She teaches graduate and continuing education courses in Construction Management at Fordham University and New York University.

Degrees and Certifications:

• New York State Licensed Professional Engineer
• Bachelor of Science and Master of Science in Mechanical Engineering
• Certificate of Competence- Master Fire Suppression Contractor - New York City Department of Buildings (NYCDOB)
• Site Safety Manager: NYCDOB
• Certified Construction Manager: Construction Management Association of America
• Designated Design-Build Professional:  Design-Build Institute of America
• Project Management Professional: PMI

View Kiwesa King's Expert Witness Profile.

• Over 35 years of experience in Mechanical / Structural Engineering & Design, Failure Analysis, Product Liability, Industural Asbestos,Pressure Vessel & Boiler analysis and evaluation of mechanical and structural components.
• Extensive trial experience. Has been involved in multi-million dollar cases. Areas involved included:

  
  

  - Piping & pipe supports - Structural failure of products - Failure analysis - Industrial asbestos - Seismic analysis - Fire protection - Pressure vessels

  - Tanks - Construction - Heat transfer analysis - Environmental qualification of equipment - Welding - Product design - Patent information

• Expertise in developing litigation rate-case exhibits and detailed supporting testimony, and in organizing case documentation into easy-to-use computer databases for trial use.

Due Diligence Professional Services, Inc. (DDPSI) is a Construction Consulting and Expert Witness Firm that Specializes in Supporting Litigation and Representing Clients for Renewable Energy, Power, Heavy Civil, Underground Utilities, Building and other related Construction Specialty Projects. They are a diverse team with construction claims and project management expertise who value the importance of relationships and continue to distinguish themselves by showing clients that Experience + Talent + Strategy = Results.

DDPS support s owners, law firms, contractors and engineers, in both a consulting and expert witness capacity by utilizing the practical job knowledge that they have gained over the years. Their consulting principals are experienced with large, complex projects incorporating conventional-phased, fast-track projects. Their unique experience and qualifications have allowed them to utilize practical skills developed during on-the-job experience, which has proven to be invaluable when analyzing contractual liability and quantifying the effects in mitigating, defending, or pursuing claims.

Consulting Services: PROJECT MANAGEMENT - CLAIM DEVELOPMENT - RISK ASSESSMENT - ESTIMATING

Areas of Expertise:

• Renewable Energy - Utility Scale Wind, Utility Scale PV Solar, Utility Scale Concentrated Solar Power, Biomass and Battery Storage
• Heavy Civil - Earthwork, Roads, Bridges Highways and Airports
• Power - Transmission, Distribution and Substation/Switching Yards
• Underground Utilities - Water, Reclaimed Water, Storm Drainage, Sanitary Sewer/Lift Stations, and Force Main
• Buildings - Commercial, Institutional, Industrial, and Heavy Civil
• Construction Specialties - Dewatering, Directional Drilling/Jack and Bore, Low Pressure Sewer, Fiber Optic Systems, Reinforced Earth Wall, Sound Barrier Wall, Telecommunication Infrastructure, Transformer – RCA of failures and Transmission Line Pole Remediation

Nicholas Fiduccia is President and Co-Founder of Due Diligence Professional Services, Inc. a Florida based expert witness service, construction claims specialist and project management consulting firm that focuses its practice on law firms, owners, engineering, construction firms, and contractors performing renewable energy, power, heavy civil, underground utilities, building and other related construction specialties.

Mr. Fiduccia has over 30 years of U.S. and Canadian construction experience involving construction contract disputes analysis and resolution, arbitration/litigation support and expert testimony, project management, engineering/construction management, cost and schedule control, and value-engineering.

Before co-forming Due Diligence Professional Services, Inc, Mr. Fiduccia had corporate-wide responsibility for technical management and oversight for the preparation and resolution of construction claims for 11 years for a utility-scale renewable energy and heavy civil infrastructure contractor, plus over 19 years of hands-on experience to ensure that profit, cost, schedule, scope, quality, and safety objectives were achieved for renewable energy, power, heavy civil, underground utilities, building and other related construction specialty projects.

Ron Ritter, Vice President and Co-Founder of Due Diligence Professional Services, Inc. has been responsible for on-site project management for Wind, Solar, Battery Energy Storage System (BESS) Projects, Heavy Civil Projects, and Underground Utility Projects over the last 25 years.

Mr. Ritter’s expertise in a full array of self-perform and key subcontractor oversight has allowed him to execute multiple EPC contracts successfully and safely.

Before co-forming Due Diligence Professional Services, Inc, Mr. Ritter successfully built a career in the construction industry that consisted of 45 years of hands-on, field experience.  Twenty (20) years of that field experience has been spent building and supervising the construction of renewable energy facilities.  Seventeen (17) years of his construction career have been spent as the senior field representative, directly responsible for the safe, timely, profitable and quality construction of 15 wind farms in the USA totaling 2,465 megawatts.  Mr. Ritter has also worked on and supported the construction of wind farms and solar farms in Canada. 

View Due Diligence Professional Services, Inc.'s Expert Witness Profile.

Dmorris.consulting Freelance Consulting provides Corporate services to the Construction industry. Principal, David Morris, has over 30 years of deep understanding and hands on experience of Construction and Construction Processes that give him a unique perspective in the industry.

Select Background Experience:

• Prior to founding DMorris.consulting, Mr. Morris served as Director of Virtual Construction for EMCOR Construction Services from 2008-2016. In this role, he directed the virtual construction activities and operations of 82 EMCOR companies. His scope of work included drafting contract language for BIM and pre-construction, setting up new projects in lean and BIM delivery methods, and reviewing new construction technologies among other duties.
• From 2001-2008, Mr. Morris worked with University Mechanical and Engineering Contractors as Director of Virtual Construction. He was responsible for estimating Plumbing, HVAC Piping and Process Piping for numerous research laboratories and healthcare facilities valued at over 100mm + each. He also delivered conceptual estimates for numerous Biotech, Power, and Co-Generation plants.
• Select Project Participation: San Joaquin County Hospital, City of Gilroy Waste Water Reclamation Plant, Shafter Prison, Vandenberg Air Force Base HVAC Replacement, Space Shuttle Launch Complex Project, Tehachapi State Prison Level-4 High Security Prison Housing, Cal Poly San Luis Obispo Co-Gen Facility, Kern Medical Center New Hospital Wing Expansion, Anheuser Busch Yeast Plant Expansion, and multiple Piping, Petrochemical, Hospital, and School projects.

Business Consulting Services:

Process Transformation Estimating Standard Operating Procedures (SOPs) Recruitment Qualification Assistance Job Descriptions

BIM Processes Initial Design, Construction, Operations, Maintenance Project Recovery Assistance Creation and Implementation of “Best Practices” Mechanical, Electrical, Plumbing Coordination (MEP)

*This Mechanical, Electrical, Plumbing, and Fire Protection Systems (MEP) Spatial Coordination Requirements for Construction Installation Models and Deliverables is a derivative work of a best practice guideline written by David Morris in 2003 and modified for the AGC BIMForum in 2009. It is the result of capturing ten years of practical methods on real world construction projects and reflects continual feedback and improvement gained from that process.

View David Morris' Expert Witness Profile.

DM Bekus Construction is a New Jersey Home Design, Construction, and Remodeling Contractor. For over 30 years they've been helping homeowners throughout the area improve properties and build homes. DM Bekus Construction delivers high quality, reliable construction services that help homeowners get more pleasure and enjoyment from their homes and buildings.

Services Include:

New Home Construction Interior Remodeling Exterior Remodeling

Construction Project Management Homeowner Association Construction Expert Witness Services

Principal, David M. Bekus has over 35 years in the Construction Industry specializing in home design, construction, and remodeling. He offers services to homeowner associations, housing communities, townhome complexes, property managers, and individuals. Mr. Bekus is licensed by the State of New Jersey as a building inspector (RCS, ICS, and HHS), a licensed home remodeler, and a licensed new home builder. He is also certified in Project Management, Cost Estimating, Construction Methods, Construction Site Safety, and is a EPA Lead Safe Certified Contractor. Mr. Bekus has been a project manager, overseeing all aspects of construction from conception and approvals to final sales for single homes and developments. He has designed and built over 100 custom homes.

View David Bekus' Expert Witness Profile.

Complete General Contractors, Inc., is a licensed General Contracting Construction Firm working throughout the Southeast for insurance companies, property owners, property managers, attorneys, and municipalities. They specialize in the cost estimation and causation of large loss complex property claims.

Services Include:

• Appraisal and Mediation Services - Fire, wind, flood, storm, hail, and water losses to residential, commercial, or industrial properties
• General Contracting Services - Restoration or general construction, commercial construction, or industrial construction projects all over the United States. Manage vendors and trades, handle project documents, and serve as an authority for project information to all parties throughout the construction process

John G. Minor, President of Complete General Contractors, is a third-generation Contractor and licensed instructor certified by the North Carolina Department of Insurance. He is a recognized expert on the costs and applications necessary to repair buildings damaged by manufacturer, builder liability, water damage or intrusion, mold, or asbestos.

Mr. Minor has provided for the successful restoration of millions of dollars in insurance restoration, building failures, and difficult repairs originating from defective construction practices and materials such as fire, wind, water, mold and mildew. His services were in demand for restoration on custom buildings on Bald Head Island. In addition to managing the business of Complete, Inc., John Minor teaches classes on mold and mildew remediation and prevention through proper building practices to a variety of clients thru Lorman Educational Services and other professional trainers.

View John Minor's Expert Witness Profile.

CLM Engineering Associates has the ability to provide a vast array of services to real estate brokers, developers, home purchases/owners. President of the firm, Craig L. Moskowitz, PE, is a Civil Engineer with extensive Construction Management experience on both commercial and residential projects. His firm handles commercial and residential building inspections as it pertains to warranty and pre-purchase inspections as well as to handle specific Structural or Civil Engineering issues related to a property. 

Experience: Mr. Moskowitz has performed safety inspections on both civilian and military projects through the application of OSHA regulations. He has designed drainage systems for the government while an officer with the United States military and done cost estimating for various projects exceeding $500 million. 

Mr. Moskowitz has designed document creation and management of high-rise construction in Manhattan. He has managed telecommunications projects for Verizon in Manhattan including CPM schedule creation and updating and directed and managed all water distribution system and sewer system work while working as a contractor to the New York City Department of Design and Construction. CLM are specialists in the following areas:

• Traditional Commercial and Residential Building Inspections
• Storm Damage Assessment, Analysis and Reporting
• Comprehensive Construction Management
• Cost Estimating for Projects Ranging from $50,000 to in Excess of $1 billion
• Construction Scheduling and Delay Analysis
• Building Code and Drawing Review

View Craig Moskowitz's Expert Witness Profile.

CivTek International is an Infrastructure Solutions, Program Management and Multi-Disciplined Life-Cycle Integrator. CivTek focuses on core industries and infrastructure fundamental to the economic and physical health and well-being of all societies: Energy, Water, Air, Agriculture, Transportation, Waste Management, Telecommunications, Internet, and Ancillary Technologies necessary to more efficiently deliver and operate these industries in an environmentally friendly, safe and profitable manner.

CivTek International now has roughly $50 billion in pre-feasibility studies in estimated capital costs projects as a result of national and international relationships and exclusive agreements CivTek International holds in various infrastructure and transportation technologies. They have signed 50-year Build-Operate-Transfer (BOT) Agreements with national governments of emerging economies.

CivTek International provides expert assessment, advice, guidance, opinion, contracting, construction support, program management and design services to leaders in government, industry and the legal community. They address major challenges in complex cultural settings, environmental, economic, legislative or forensic consequence in programs and projects relating to capital infrastructure in transportation, green sustainable environmental solutions, energy, oil & gas, and industrial facilities.

Clients have included Leadership of Domestic and International Industry, CEO's and Corporate Leadership, Banks, Financial Institutions and Investors, Risk Management and Insurance Industry Leaders, Attorneys, Legislators, Heads of State, and Heads of Departments and Ministries.

CivTek Capabilities:

General Infrastructure Real Estate and Land Development Executive Aviation Charter Airport Construction / Aviation Leadership International Oil Refinery - Design, Build, Operate, Transfer Project Financing Tank Farms

Ecofreighter and Deep Sea Marinas and Terminals Mining Water Supply Transportation Construction Management Healthcare and Resort Hospitals Information Technologies Program Management Office

Principal, Thomas J. Young, PE, has over 37 years of experience in national and international Transportation Construction, the Civil Engineering specialty regarding highways, bridges, rail, airports, harbors, and associated infrastructure.

Mr. Young is a skilled integrator of the parameters of program and project life cycles, leadership, management, business operations, engineering and construction. He has extensive knowledge of regulatory compliance, environmental processes, industry standards, best practices, and field operations in urban and remote areas.

Mr. Young has broad construction management and design background for many of the knowledge and skill areas required in mining operations, bridges, highways, land development, major soil/structure type facilities, land survey, and construction surveying, including work in Arctic facilities and in desert regions.

View Thomas J. Young's Expert Witness Profile.

Burtness Engineering Services, is a multi-disciplined consulting engineering firm serving municipal, institutional, industrial, and commercial end user clients, civil engineering firms, and landscape architectural firms with MEP services for the construction industry. They specialize in Street and Area Lighting Design, Electrical Engineering, and Forensic Engineering services.

Consulting Services Include:

• Illumination Engineering for Roadway, Street, and Area Lighting
• Electrical Engineering (Through 15kv)
• Monitoring and Control Systems for Street and Area Lighting
• Full Range of MEP Services
• Industrial Instrumentation and Control Systems
• Stakeholder Based Collaborative Design Philosophy
• Focusing on the Marriage of the Art of Aesthetic Design and the Science of Technical Engineering
• Serving as a Prime or a Sub Consultant
• Forensic Consulting and Expert Witness Services

Principal, Thomas H. Burtness, PE, is an Electrical Engineer specializing in both Electrical and Building Construction - equipment selection, specification, and installation (actually “working with the tools”), as well as cost control techniques.

Background - Mr. Burtness has 40+ years of experience in the design, specification, construction contract administration, installation, startup, and troubleshooting of electrical power, on-site generation, distribution, control, and instrumentation systems and equipment for residential, commercial, industrial, and municipal occupancies. His experience also includes water, wastewater, and stormwater treatment plants, and military facilities.

Additional expertise includes Illumination Engineering for street, roadway, and area lighting including photometric footcandle requirements, calculations, field verification, equipment specifications, installation, and analysis of failure, glare, overlighting and underlighting.

Thomas Burtness has written numerous in-depth reports, including municipal master planning documents, as well as operation, maintenance, and testing manuals. He also has extensive experience in public speaking and teaching.

View Thomas Burtness' Expert Witness Profile.

Mr. Beringer is the Principal of Beringer & Associates (B&A) and Liability Program Management (LPM). He is an approved consultant by the A.M. Best organization, since 2006, for claims, liability, and insurance program management, including matters involving construction, OCIP, TPA, JPA, Captives, Memorandum of Coverage, and insurance coverage analysis. The Cayman Island Monetary Authority approved Mr. Beringer as a licensed captive owner in 2002 for Segregated Portfolio Company Creative Solutions, SPC.

Mr. Beringer holds an LPCS, RPA; is a founding member of CLM, a published author in various publications, and presenter at the CIMA, CPA, A.M. Best, and other conferences.

Mr. Beringer, as B&A, has provided expert services for risk analysis and management services to the insurance, reinsurance, construction, and transportation industry since 2000. Previous to the formation of B&A, he worked in the insurance industry for 30 plus years as a region Litigation Manager with Automobile Club, Industrial Indemnity, Great American, and The Hartford's Speciality Risk Service. Since B&A’s formation, Mr. Beringer assisted Reliance, AIG, Swiss Reinsurance, and Sterling Insurance for review of their insurance programs, analysis, and performance of claims systems and operations.

Mr. Beringer has participated in over 300 mediations, managed handling of over 30,000 cases in federal, state, and local venues on behalf of clients, and provided expert services to plaintiff and defense counsel.