Environmental Engineering Consultants: 5

Bonneau Dickson, PE, is a Sanitary Engineer with over 35 years of experience in all aspects of studying, designing, and constructing water, wastewater, and stormwater facilities, both in the United States and abroad.

Mr. Dickson provides consulting services in the following areas::

Sewage Overflows Wastewater Facilities Design Wastewater Facilities Planning Septic Systems Water Facilities Design

Water Facilities Planning Standard of Care Stormwater Facilities Design Stormwater Facilities Planning PCE Contamination

Design Experience - Mr. Dickson has participated in the design of approximately 300 water, wastewater and stormwater projects, ranging in size from a single septic tank or well to a 120 MGD pure oxygen wastewater treatment plant. He was the project manager on many of these projects.

Construction Management Experience - Mr. Dickson has been resident engineer or otherwise participated in the construction phase of approximately 20 water and wastewater projects.

Management Experience - Bonneau Dickson has both project management and general management experience. Has been project manager on approximately 175 projects. He was operations manager for a 150 person engineering firm, and has frequently managed design teams and design departments. He has served as staff to technical agencies assisting them select, hire, and manage other consultants.

View Bonneau Dickson's Expert Witness Profile.

For over 45 years, Chuck Dutill, P.E., D.F.E. has been performing hydrology and environmental engineering nationwide. He has focused on wastewater, stormwater, flooding, sewers, septic systems, groundwater, drainage, hydrology, hydraulics, drinking water, mold, erosion, and air quality. The hydrology, civil engineering, and environmental engineering work of Mr. Dutill has been heavily concentrated in:

• Provision of expert witness services, including investigation, analysis, consultation
• Analysis of regulations, including concerning compliance and enforcement
• Evaluation of monitoring requirements
• Development of engineering feasibility studies and facility plans
• Acquisition of permits with appropriate requirements and fees
• Provision of project cost advice

Mr. Dutill also has significant engineering experience in the areas of design, construction management, operation and maintenance assistance, and community acceptance. He serves as a civil engineer, environmental engineer, and hydrologist on a consulting basis for private, institutional, and governmental clients. 

Expertise:

Hydrology Sewer Water Flooding  Groundwater  Hydrogeology  Drainage  Wastewater Treatment Septic Systems Utility Sewer Systems  Sanitary Sewage  Mold  Stormwater Management  Hydraulics  Hazardous Waste  Drinking Water Waste Management

Erosion Soils  Pumping  Water Quality  Air Quality  Wells  Runoff Backups  Water Mains Storm Sewers  Detention  Contamination  Spills  Pollution  Sinkholes  Sedimentation  Wetlands  Infiltration/Inflow  Dams  Floodplains

Toxicity Remediation Grading Health and Safety  Modeling  Odors  Combined Sewers  Overflows  Aquifers  Water Distribution Water Treatment Hydraulic Fracturing  Hydroplaning  Monitoring  Metering Maintenance  Design Construction  Inspections

CV Available Upon Request View Mr. Dutill's Expert Witness Profile.

The four PhD and registered PEs at Miller Engineering are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. We have a dedicated office with a full time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise covers well the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering. The areas listed below are from actual projects completed in our 40 years of history. 

Vehicles Car/Truck Accident Reconstruction Crash Data Retrieval (CDR) Visibility & Reaction Time Analysis Tires, Trailers, Brakes & Accelerators Truck/Off Road Vehicle Egress/Ingress Traffic Signing and Construction Zones Electronic Vehicles Mechanical & Electrical Safety Product Safety & Analysis Machinery - Metal, Wood, Plastic Molding Machine Guarding & Safety, Robots, Automation Hazard and Risk Analysis Employee Safety Procedures – OSHA Electrical Distribution & Transmission Hazards

Warnings & Instructions Warning Labels & User Manual Design Hazard Analysis & Product Label Designs Medical Device & Drug Warnings & Instructions Inadequate Warnings Analysis Standard Compliance (ANSI Z535) Product Recall Information & Strategies Consumers/Household Safety Appliances & Tools Child Furniture, Choking, Playgrounds Swimming Pools & Exercise Equipment Recreation - ATV, Boats, Bicycles, Boards Ladder, Stair, Step and Railing Accidents Slip, Trip, & Fall Accidents CPSC Recall Information & Strategies

Chemicals Safety & Labeling NEW OSHA HAZCOM (2012) & GHS Review MSDS, SDS and Product Label Compliance Toxic Torts - Diacetyl, Asbestos, Benzene, Lead, Carbon Monoxide Vaping & E-Cigarette Health Effects Chemical Exposures & Workplace Safety Chemical Inhalation, Ingestion, Dermal Contact Contamination - Water & Environmental Manufacturing & Process Line Accidents Slips, Trips, Falls, & Entanglements Fires & Explosions Cause & Origin Investigations Gas, Vapor, & Electrical Spontaneous Combustion Vaping & E-cigarette Battery Failures Fire Control & Explosion Issues

Agriculture Tractor & Equipment Accidents Chemical Applications & Exposures Crop Storage & Harvesting Accidents Pesticides Construction Vehicle Visibility Accidents Slip, Trip, & Fall Accidents Power Tool Repetitive & Immediate Injuries Scaffolding - Cranes - Hoisting - Fork Lifts Insurance Subrogation & Forensics Accident Investigations Electrical & Fire Causation Chemical Leakage Damage Defective Equipment Injuries Premise and Process Damages

James M. Miller, PE, PhD – Founder  Dr. Miller is an Emeritus Engineering Professor at the University of Michigan. He has directly served in Washington originating several Federal OSHA safety regulations, and interacts regularly with CPSC regarding safety and product recalls. Dr. Miller often works on projects relating to compliance with occupational safety standards, provides upper management guidance on product design, recall and liability issues, and serves as an expert witness.

Mark R. Lehto, PhD – Co-Founder Dr. Lehto is a Professor of Engineering at Purdue University. He completed his Ph.D. in engineering at the University of Michigan, where he specialized in Human Factors Engineering, in particular Warnings and Labeling. Dr. Lehto specializes in knowledge engineering, warnings and instructions, structuring expert systems, accident modeling, accident statistical analysis, consumer product safety, boating safety, in-field national surveys of product usage, and product information effectiveness.

David R. Clark, PE, PhD – Co-Founder Dr. Clark is an Emeritus Engineering Professor at Kettering University. He was an engineering PhD graduate from the University of Michigan, where he specialized in human factors engineering and system safety analyses. He has a special expertise in electrical fire- and explosion-related accidents, and has extensive experience working for loss control companies, performing over 150 fire origin and cause investigations in the past few years.

Adam M. Olshove, PE, MSE – Engineering Manager Mr. Olshove has over 10 years of experience providing consulting services to industry and the legal profession. He holds an MS in Mechanical Engineering with a focus on control systems and battery modeling (2019), and a BS in Mechanical Engineering (2012), both from the University of Michigan. He has performed dozens of on-site investigations nationwide in relation to consumer product design and industrial accidents, including failure analysis and testing.

Jeffrey D. Rupp, MSE – Engineering Associate Mr. Rupp has a BS in mechanical engineering from the University of Michigan and a MS in systems engineering and engineering management from Wayne State University. Among his company affiliates is 26 years with Ford Motor Company and Volvo Car Corporation, where he was involved in crash development and crash sensing calibrations.

Philip T. Tringale, PhD, PE is a registered Professional Civil Engineer with over 25 years of Environmental Consulting experience. Dr. Tringale has served in senior technical and management positions throughout his thirty year professional career. With experience gained from a start-up consulting firm as well as from well-established engineering companies, he continues to focus his energies on leading technical projects and overseeing technical and geographic expansion activities.

Consulting Services Include:

• Site Assessment and Remediation Program Direction
• Mergers & Acquisitions Assistance
• Public Participation Programs
• Regulatory Agency Interaction
• Litigation Support for Litigation involving Source Identification, Nature and Extent of Contamination, Cost Allocation, and Compliance with the National Contingency Plan

As a registered professional engineer, Dr. Tringale has directed numerous site assessments and remediation programs involving soil and groundwater contaminated primarily by organic solvents, metals, and petroleum products. He has particular expertise in site characterization and in the use of in-situ testing to evaluate soil properties. Dr. Tringale has provided final design for remedial actions that involve excavation, containment, bioremediation, vacuum extraction, monitoring, and groundwater treatment.

Selected Projects:

• Historic Schlage Lock manufacturing complex in San Francisco which was rezoned mixed-use commercial and residential. Services included excavation of sumps and contaminated soils, and the design and installation of a soil vapor extraction system to remove volatile organic compounds
• Contra Costa Waste Service Landfill - provided monitoring, remedial planning, and design of landfill closure services for this Superfund Landfill site

View Dr. Tringale's Expert Witness Profile.

Robin D. Franks, PG, CHMM, RSO has over 30 years of relevant industry experience as a professional Geoscientist / Geologist and Certified Hazardous Materials Manager. Ms. Franks has been the President, Founding Principal, and Managing Director of TGE Resources, Inc., for over 30 years. Her specialties include Real Property Assessment and Characterization, Clean-up, and Closure in the commercial, industrial, oil and gas, and healthcare industries. 

Consulting Services Include:

• Real Property Assessment
• Industrial Compliance Auditing
• Oil and Gas Real Estate Clean-up
• Well Blow-out / Underground Storage Tank Project Management
• Redevelopment, Clean Closure Services
• Asbestos - Sick Building Management
• Lead-based Paint Management
• Industrial Hygiene / Indoor Environmental Quality - Mold / Fungus Assessment, Testing, and Remediation

Ms. Franks has been actively involved in more than 35 "merger/acquisition" projects encompassing over 750 sites nationwide. As senior Technical Advisor, she has been involved in thousands of real property investigations, many of which have involved remediation/closure projects within Texas and throughout the United States. Ms. Franks is a professional lecturer who delivers presentations and instruction throughout the United States.

View Robin Franks' Expert Witness Profile.