Accident Investigation and Reconstruction Consultants: 65

CivTek International is an Infrastructure Solutions, Program Management and Multi-Disciplined Life-Cycle Integrator. CivTek focuses on core industries and infrastructure fundamental to the economic and physical health and well-being of all societies: Energy, Water, Air, Agriculture, Transportation, Waste Management, Telecommunications, Internet, and Ancillary Technologies necessary to more efficiently deliver and operate these industries in an environmentally friendly, safe and profitable manner.

CivTek International now has roughly $50 billion in pre-feasibility studies in estimated capital costs projects as a result of national and international relationships and exclusive agreements CivTek International holds in various infrastructure and transportation technologies. They have signed 50-year Build-Operate-Transfer (BOT) Agreements with national governments of emerging economies.

CivTek International provides expert assessment, advice, guidance, opinion, contracting, construction support, program management and design services to leaders in government, industry and the legal community. They address major challenges in complex cultural settings, environmental, economic, legislative or forensic consequence in programs and projects relating to capital infrastructure in transportation, green sustainable environmental solutions, energy, oil & gas, and industrial facilities.

Clients have included Leadership of Domestic and International Industry, CEO's and Corporate Leadership, Banks, Financial Institutions and Investors, Risk Management and Insurance Industry Leaders, Attorneys, Legislators, Heads of State, and Heads of Departments and Ministries.

CivTek Capabilities:

General Infrastructure Real Estate and Land Development Executive Aviation Charter Airport Construction / Aviation Leadership International Oil Refinery - Design, Build, Operate, Transfer Project Financing Tank Farms

Ecofreighter and Deep Sea Marinas and Terminals Mining Water Supply Transportation Construction Management Healthcare and Resort Hospitals Information Technologies Program Management Office

Principal, Thomas J. Young, PE, has over 37 years of experience in national and international Transportation Construction, the Civil Engineering specialty regarding highways, bridges, rail, airports, harbors, and associated infrastructure.

Mr. Young is a skilled integrator of the parameters of program and project life cycles, leadership, management, business operations, engineering and construction. He has extensive knowledge of regulatory compliance, environmental processes, industry standards, best practices, and field operations in urban and remote areas.

Mr. Young has broad construction management and design background for many of the knowledge and skill areas required in mining operations, bridges, highways, land development, major soil/structure type facilities, land survey, and construction surveying, including work in Arctic facilities and in desert regions.

View Thomas J. Young's Expert Witness Profile.

CLM Engineering Associates has the ability to provide a vast array of services to real estate brokers, developers, home purchases/owners. President of the firm, Craig L. Moskowitz, PE, is a Civil Engineer with extensive Construction Management experience on both commercial and residential projects. His firm handles commercial and residential building inspections as it pertains to warranty and pre-purchase inspections as well as to handle specific Structural or Civil Engineering issues related to a property. 

Experience: Mr. Moskowitz has performed safety inspections on both civilian and military projects through the application of OSHA regulations. He has designed drainage systems for the government while an officer with the United States military and done cost estimating for various projects exceeding $500 million. 

Mr. Moskowitz has designed document creation and management of high-rise construction in Manhattan. He has managed telecommunications projects for Verizon in Manhattan including CPM schedule creation and updating and directed and managed all water distribution system and sewer system work while working as a contractor to the New York City Department of Design and Construction. CLM are specialists in the following areas:

• Traditional Commercial and Residential Building Inspections
• Storm Damage Assessment, Analysis and Reporting
• Comprehensive Construction Management
• Cost Estimating for Projects Ranging from $50,000 to in Excess of $1 billion
• Construction Scheduling and Delay Analysis
• Building Code and Drawing Review

View Craig Moskowitz's Expert Witness Profile.

Code 3 Consultations, owned and operated by Jayson Uribe, Vehicle Investigator, provides vehicular analysis, scene recreation, motorcycle accidents investigation, and professional driver training services. Heavily involved in the motorsports industry for almost 20 years, Mr. Uribe is also an active Firefighter with the Napa County Fire Department, as well as a professional Driver and Instructor at Sonoma Raceway and the Allen Berg Racing School at Laguna Seca. 

Automotive Crew Training Services - Mr. Uribe has in-depth knowledge and first-hand experience with any and all modern safety systems and how they operate. He has the mechanical knowledge to be able to decipher the validity / integrity of a potentially compromised system which may have been associated with an incident. With his experience in the motorsports industry,  5 years in accident recreation and autonomous vehicle research and development, and 8 years in a coaching / teaching role, Mr. Uribe is available to work with automotive companies to properly train their crew.

Clients: Allen Berg Motorsports (ABMS), Sears Point Racing Experience (SPRE), Skip Barber Racing Schools, American Supercamp (ASC), Waymo Technologies, Faction Tech Co., Mercedes-Benz USA/GER, etc.

Degrees / Certifications:

• WECA - Electrical Engineering
• ACTAR Certification (pending) (2017-2022)
• Mercedes Benz Type 2 Drivers Program
• 7 years of International hands-on experience in Accident Analysis and Advanced Driving
• 1 of 5 Americans to currently hold an FIM International License USMCA Certified Instructor / Coach

View Jason Uribe's Expert Witness Profile.

Dean Tekell Consulting provides expertise in the areas of Traffic Engineering, Parking, Public Transit, Vehicle Dynamics, Accident Reconstruction, and Technical Accident Investigation.

Often, government agencies, consulting engineers, architects, developers, business institutions, and attorneys must know how to move people and their goods safely and efficiently. The firm offers advice on site selection, traffic access, and traffic circulation on the site. The firm provides insight into potential problems with zoning and subdivision regulations. Traffic impact studies, traffic signal warrant analysis, traffic signal design and permitting services related to development activity are also available through the firm. Parking garage and parking lot operations are specialties offered to business institutions.

Other services include: Queuing Studies for drive-through services; Traffic Calming and neighborhood speed control; School trip and pedestrian safety plans; Traffic Accident Reduction and highway safety techniques; Transit Funding Operation; Intelligent Vehicle-Highway Systems.

Dr. Box Consulting, Inc. is one of the highest respected consulting firms dedicated to the Packaging industry. Since 2010, it has become a globally renowned source for packaging process improvement, purchasing, manufacturing, distributing, shipment, and packaging environments. Dr. Box Consulting Inc.'s clients include Fortune 1000 corporations around the world and the Governments of the United States, Afghanistan, Tajikistan and the Country of Georgia.  

Business Consulting Services:

Packaging and Business Improvement - Waste reduction, quality improvement, safety improvement, profit improvement, lean manufacturing, machine productivity improvement, overtime reduction, on-time-delivery improvement and many other business improvement areas. A global leader in Packaging Procurement results.

Packaging Design and Branding - Assess packaging lines, improve efficiency, reduce material cost, design cost-effective packaging utilizing better and more flexible designs to protect and display products.

Branding - Design packaging, proper color choice, placement and designs of logos, names of products, placement of wording on the product and packaging for cosmetics, food products, household goods and many others. 

Packaging Research - Market assessments to determine the viability of building new plants in specific areas, including economic analysis, trend analysis, assessment of potential competitors’ strengths and weaknesses, market pricing analysis, and determination of potential customers.

Randy Phares, President and CEO of Dr. Box Consulting, Inc., is a Packaging expert specializing in Corrugated and Folding Carton Packaging. He has over 30 years of progressive leadership experience in Packaging, Procurement, Shipping, Lean Manufacturing, Quality, Safety, Productivity, and Business Improvement.

Since he began his career in 1990, Mr. Phares has held almost every job in packaging operations. These include manufacturing, distribution, sales, design, safety, and transportation.

Mr. Phares has served as a consultant for the Technical Association of the Pulp and Paper Industry's (TAPPI) Consulting Council. He was also the Vice Chair of the Packaging Consultants Council for the Institute of Packaging Professionals (IOPP) and President of the South Texas Manufacturer’s Association. 

Mr. Phares has spoken and keynoted National, International and Local conferences. He has been hired to do DOT Packaging HAZMAT training for paper, rigid, and flexible packaging. Mr. Phares has done leadership training, Lean Manufacturing training, sales training, machinery training, new Supervisor training, safety training, and much more.

View Randy Phares' Expert Witness Profile.

Paul Eason is a Licensed Professional Engineer, Nationally Certified Fire & Explosion Investigator and Forensic Consultant. His expertise comes from a strong background in industry and academia. In addition to his consulting practice, he is a professor in the School of Engineering at the University of North Florida, and maintains a graduate faculty appointment in the Materials Science and Engineering Program at the University of Florida. 

Dr. Eason has testified in numerous trials and depositions in the following practice areas: 

Product Design & Manufacturing Analysis - Metallurgy & Materials - Fire & Explosions - Industrial Accidents 

Areas of Expertise: Product Liability and Materials Failure Analysis, Product Defect & Safety Issues including: Metals, Plastics, Glass, Ceramics, Corrosion, Fatigue, Overload & Material Selection 

Fire and Explosion Analysis including: cause and origin determination, product related fire causation, industrial process accidents, dust explosions, welding / brazing accidents

Electrical Safety Group Inc. provides consulting services in Occupational Electrical Safety for matters critical to electrical safety, including:

• Codes
• Standards
• Regulations
• Safe Work Practices
• Management Systems
• Inherently Safer Designs
• Reliability

Click here for my current CV

Partner and Principal Consultant, H. Landis “Lanny” Floyd II, PE, CSP, CMRP, CRL, CESCP, Life Fellow IEEE, has over 45 years of experience in Electrical Safety in the Workplace. His work has advanced the application of Human Factors Engineering, Electrical Technology, and Safety Management Systems in preventing occupational electrical injuries. 

Mr. Floyd retired from DuPont in 2014, holding the positions of Principal Consultant - Electrical Safety & Technology, and Global Electrical Safety Competency Leader. For more than 35 years, Mr. Floyd has focused on electrical safety in the construction, operation, and maintenance of industrial and commercial facilities. This included safety management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance. From 1992 to 2014, he led the team that designed and facilitated implementation of a strategy for continuous and sustainable improvement in occupational electrical safety for DuPont Global Operations. This work enabled breakthrough performance in prevention of serious injuries and fatalities from electrical energy in DuPont facilities worldwide. In 2013, Mr. Floyd was invited to join the faculty at the University of Alabama at Birmingham, where he teaches in the Advanced Safety Engineering and Management Master of Engineering degree program. 

Author / Speaker - Actively involved in professional organizations spanning electrical engineering, occupational health and safety, and maintenance and reliability, Mr. Floyd has authored or co-authored more than 70 papers and articles and has given more than 150 presentations at conferences, seminars and webcasts in his work to advance the practice of electrical safety. He has been an invited speaker on electrical safety in Australia, China, Brazil, Western Europe, and throughout North America. 

View Lanny Floyd's Expert Witness Profile.

Vincent A. Ettari, P.E., P.C. specializes in many fields of Civil, Structural, Site, Coastal, Safety & Environmental Engineering, including the Design & Analysis of:

• Structures, Buildings, Houses, Dwellings
• Foundations, Footings, Elevators, Retaining Walls, Dams
• Development Plan & Plats for Sites, Properties, and Residences
• Underground & Subsurface Chamber / Chambers
• Scaffold, Scaffolds, Scaffolding
• Site Plans & Subdivisions: Industrial, Commercial, Residential
• Roads, Roadways, Ramps, Walks, & Man Hole Cover / Covers
• Sidewalks, Walkways, Paths & Pathways
• Lighting: Lamps, Lights, Lamp Poles, Light Levels
• Luminaries & Illumination (Specifications)
• Rock Cuts & Blasting (Topography, Specification)
• Soil Slopes / Samples / Mechanics / Geotechnical Engineers
• Sanitary Facilities, Septic Systems (Board of Health Septics Approval)
• BOHA / DEP Approvals
• Water, Drains, Drainage, Sewer & Sewage Lines & Mains
• Culvert / Culverts, Manholes (Man Holes) & Catchbasins / Catch Basins
• Inspection, Supervision, and Certification of Construction
• House Inspector & Inspections
• Road, Roadway, Walk & Sidewalk Premises Liability (e.g., Steep Slope)
• Walkway, Path, Ramp & Pathway Premise Liability (e.g., Steep Grade)
• Coefficient of Friction / Slip & Fall (Snowy & Icy Conditions)
• Vertical Discontinuity / Discontinuities / Trip & Falls
• Small Ports / Port, Marinas / Marina, Marine Dredging
• Levees, Jetties, Dolphins, Piers, Sea & Flood Walls
• Wharves, Breakwaters, Bulkheads, Weirs, & Revetments
• Groins, Dikes and Waterfront Structures
• Drainage Basin Analysis, Rainfall, Floods & Flood Plain / Plains
• Flooding Controls & Control Devices
• Storm Water Runoff (10, 25, 50 & 100 Year Storms)
• Pressure & Pressures: Wind, Wave / Waves, Ice, Snow
• Rain Fall Run Off & Storm Water Pollution Treatment
• Excavation, Grading, Fills & Filling Operations (Swales, Berms, Silt Fence)
• Erosion Control, Sediment Barriers, Sedimentation / Catch Basins (Hay Bales)
• Pumps and Pump System Line & Main
• Slope, Dam, Levee, Jetty, Dolphin, Pier, Wharf & Breakwater Collapse
• Bulkhead, Weir, Revetment, Groin, Dike, Footing & Foundation Failures
• Failure of Fire Containment Wall, Elevator or Water Front Structure
• Tenement House Façade Collapses
• Code History of Existing Multiple / Multi-Family Dwelling / Building
• Application of Municipal Building, Fire & Property Maintenance Codes
• City, Town & Village Zoning, Planning, Steep Slopes & Grades, Wetland & Wetlands Ordinances
• Testimony at Board Meetings as a Design Forensics Engineer

Ferrantello Group, PC is a multi-faceted, full service Long Island Land Surveying Company with engineering consulting services available as needed for all types of projects. Ferrantello Group, P.C. has provided quality service and technical excellence at price points designed to meet budgets in any economy. 

Awarded the Point of Beginning Top 100 Surveying Firms in United States, Ferrantello Group, PC has built solid relationships and an extensive community network throughout the years with many municipality and county governments throughout New York. Their service extends to land owners, lenders, title companies, real estate investment firms, commercial brokers, architects, engineers, contractors and developers. These relationships help provide our clients with the additional project resources that may be required for project submittal. 

Consulting Services:

Land Surveying and Mapping 3D Scanning and Modeling Construction and High Rise Layout

Flood Mapping and FEMA Certification Site Planning / Subdivision Mapping Litigation Support / Expert Witness

Frank S. Ferrantello, PLS, is a New York State Licensed Land Surveyor with over 20 years of experience in Surveying, Civil Engineering, and Land Use Planning. Both his field and office Work experience have dealt with a wide range of projects and sites including residential single, multifamily, high rise municipal, utility, private and public, commercial, and industrial. Prior to and post college, 

Mr. Ferrantello worked for the firm of John P. Ferrantello PC from 1998 to 2010 and MJM engineering from 2008 to 2016. His duties consisted of performing office and field surveying, drafting, research, computations, boundary analysis, solutions, investigations and determinations. 

Mr. Ferrantello also has extensive experience in Site Planning and Subdivision Consulting, examining title records, deeds and other recorded documents such as ingress and egress, pedestrian easements, right of ways, air and development rights, vista easements, bridle paths, beach, bathing and mooring rights, covenants and restrictions, real property, zoning, and other land use principles. www.experts.com

View Frank S. Ferrantello's Expert Witness Profile.

Julian Forbes-Laird is a Chartered Arboriculturist, Arboricultural Association Registered Consultant, experienced Expert Witness and Principal Consultant of Forbes-Laird Arboricultural Consultancy Ltd. Mr. Forbes-Laird has a professional practice working throughout the UK and overseas. He covers all aspects of arboriculture, specializing in planning, tree safety and litigation related matters.

Mr. Forbes-Laird is supported by a team of regionally based consultants, giving him national and international reach. He sets the standard for client service, works throughout the UK and abroad, provides commercially realistic strategic advice, prepares sensitive yet practical management plans, works within project design teams to evolve arboriculturally defensible layouts, wins planning appeals, and handles an enormous amount of work under pressing deadlines helping clients' achieve the best outcome. 

Mr. Forbes-Laird is widely recognised as an authority on legal issues pertaining to trees and is an experienced Expert Witness. His expert services include Pre-Action Case Evaluation, TPO Prosecutions, Forensic Accident Investigation and Tree Root Damage to Buildings. Other Services Include:

• Planning for Developers and Local Authorities
• Tree Preservation Orders (TPO's)
• Safety Inspections
• Subsidence
• Expert Witness
• Landscape Design

Dr. Kevin A. Rider, PhD, PE, CPE of Forensic Human Factors, LLC., providing investigations and expert testimony regarding predictable human behavior, particularly as it relates to motor vehicle and pedestrian collisions, premises liability, and slips, trips and falls, the design and use of products, and adequacy of warnings/instructions. His work focuses on identifying the Human Factors Elements that lead to unfortunate incidents, and what should have been done to prevent them. 

Dr. Rider is a Licensed Professional Engineer and Certified Professional Ergonomist, and has studied human movements and behavior, and served as a human factors consultant since 1999, including five years teaching industrial engineering and occupational safety courses at West Virginia University. He has presented at professional conferences, both nationally and abroad, and his research is published and cited in a number of peer-reviewed journals. He continues to serve as a reviewer for conference and journal manuscripts. 

Dr. Rider has testified over 100 times, and excels at educating attorneys and jurors. His services are available to attorneys for both Plaintiff and Defense. 

Areas of Expertise:

• Driver Behavior - Cell Phone Use and other In-Vehicle Distractions
• Product Liability - Design, Guards, Warnings, Adequacy of Instructions
• Premises Liability - Sidewalks, Shopping Centers, Community Parks, Retail Displays
• Slips, Trips, and Falls
• Visibility and Lighting - Illumination and Conspicuity of Objects
• Workplace Safety - Defective Products, Gross Negligence or Misconduct, Third Party Actions on Worksites
• Machine Guarding 

.

Ken Tannar’s Golf Expertise is unique in the legal world. As an Errant Golf Ball expert, Mr. Tannar can analyze and give advice on potential damage produced by errant golf balls. With an increase in residential developments built around golf courses, errant golf balls will almost certainly cause damage to property and/or persons. 

Mr. Tannar provides litigation support services on all cases involving golf club / ball interactions. Having consulted on over 70 cases, he uses a highly accurate golf ball projectile model, Mr. Tannar can determine the “zones of danger.” including:

Golf Netting Safety Height - Topographic Errant Ball Analysis - Adjoining Property Errant Golf Ball - Safety Determination

Mr. Tannar has been providing expert advice to golf courses, driving ranges, residential properties and the courts for since 2000. He has advised on cases in Australia, Canada, Norway, Spain, UK and many of the US States.

Harvey C. Voris is a Product Design Engineer with 35 years of proven experience in the Fitness Industry. Mr. Voris has designed and worked on approximately 200 fitness products and has been issued 7 U.S. utility patents. 

Consulting Services Include:

• Standards compliance evaluations of products, facilities and providers
• Design, analysis, and sourcing services for product concept through manufacturing
• Manual, warning, and documentation drafting
• Testing protocol design, testing apparatus design, and industry standard compliance verification

Mr. Voris has a Bachelors of Science in Engineering from UCLA with a specialization in Bio Structural Mechanics. His Masters in Engineering is from Cal State Long Beach where he specialized in Fatigue and Failure Analysis. Mr. Voris has spent 21 years devoted to the development and promotion of safety standards for the fitness industry. He has authored numerous standards and has chaired the ASTM committee devoted to fitness standards development since 1995. Mr. Voris has also delivered seminars on Fitness Safety Standards and Product Design topics both nationally and internationally. www.experts.com

View Harvey Voris' Expert Witness Profile.

A Licensed Professional Engineer in 11 states, John Averrett specializes in Electrical Shock / Electrocution, Utilities, Lightning Strikes, and Grounding cases involving death, personal injury, industrial equipment failure, vehicular accidents, fire cause/origin, contract, and construction disputes. 

Areas of practice include: Alabama, Florida, Georgia, Mississippi, Tennessee, South Carolina, North Carolina, Kentucky, Arkansas, Louisiana, and Texas; other states by comity. 

John Averrett is Executive Vice President of Goodwyn Mills & Cawood headquartered in Montgomery, AL. He has more than 25 years' experience in plan development for governmental, municipal, industrial and commercial clients and is currently coordinating a group of twelve other electrical engineers and designers. In addition to his design efforts, Mr. Averrett's experience includes work with electric utilities that includes transmission, sub-stations, and distribution; work with investigating lightning strikes; work with investigating grounding insufficiencies; and work analyzing and providing solutions for arc flash hazards.

Litigation Support - Mr. Averrett offers expert witness services to attorneys representing plaintiff and defendant. He provides site review, thorough reporting, deposition, and trial testimony as needed nationwide.

Electrical Engineering Electrocution Lightning Lightning Protection Arc Flash Electrical Safety

Building Analysis Grounding Shock Electric Shock Drowning Breaker Coordination Electrical Utility Districution

Roy Theophilus Bent, Jr., CEO of Houston Auto Appraisers, is a well known and respected expert and consultant in the automotive industry. He holds numerous licenses and credentials as an ASE Certified Mechanic, I-Car Collision Specialist, Licensed Auto Appraiser, Insurance Adjuster, Umpire, Mediator, Arbitrator, Classic Car Judge, and Vintage Car Historian. An IACP Certified Auto Appraiser and Field Inspector, Mr. Bent offers appraisal services to insurance companies, attorneys, banks, credit unions, lenders, agricultural credit corporations, accountants, government agencies, auctioneers, farmers, ranchers, transportation companies, and individual consumers. He provides the following selected consulting services:

Diminished Value Appraisals Total Loss / Stolen Vehicle Appraisals Certified Real Estate Appraisers and Texas Homeowners Insurance Claims Assistance Industrial, Construction & Heavy Equipment Appraisals

Tractor Trailer and Equipment Appraisals Recreational Vehicles Motor Homes Travel Trailer Appraisals

KPRC 2 Houston News Interview with Roy Bent on Diminished Value

Mr. Bent is the seated President of the Bureau of Certified Auto Appraisers (BOCAA), a National Professional Appraisal Credentialing Organization that has trained, tested, and certified over 2,400 students under his leadership in the practices of IACP Certified Auto Appraisals and Litigation assistance. In addition to his appraisal services, Mr. Bent offers  Appraisal Training Certification courses designed to properly train and educate the appraiser with the minimum requirements set forth by the Bureau of Certified Auto Appraisers. BOCAA courses include:

• IACP Certification Exam - To provide suitable training and education to the auto appraisal professional. IACPSM Certified Appraisers follow strict adherence to the Bureaus’ Code of Ethics and USPAP guidelines
• Texas Adjusters Pre-Licensing Course - 40-hour Texas Adjusters Pre-licensing course approved by the Texas Department of Insurance as an alternative method of obtaining your Texas Adjusters Property & Casualty license

Auto Appraisals for Law Enforcement Agencies - Roy Theophilus Bent, Jr., IACP Certified Auto Appraiser & Expert Witness is regularly retained by the United States Department of Justice (DOJ), Federal Bureau of Investigations (FBI), U.S. Marshals Office, U.S. Customs and Border Protection, and Police Departments to assist with white-collar crimes, vehicular homicide crimes, and felony drug crimes resulting in Federal Criminal Forfeitures, Civil Judicial Forfeitures, Administrative Forfeitures & Seizures of rightfully seized and wrongfully seized assets and personal property including Exotic Luxury Cars, Luxury Motor Homes, Travel Trailers, Custom Motorcycles, and other valuable assets.

View Roy T. Bent's Expert Witness Profile.