Accident Investigation and Reconstruction Expert Witnesses: 81

Gregory J. Cahanin, CP works in the Fire Protection Engineering field. Over 40 years of experience in the application of sound engineering principles work to produce results in litigation cases. He is nationally recognized as a Life Safety and Fire Protection expert. He performs fire origin and cause, fire alarm, fire sprinkler, kitchen suppression, fire wall and compartmentation failures, and slip and fall forensic investigations.

Gregory J. Cahanin Fire & Code Consulting has been based in St. Petersburg, FL for over 25 years.

Background - Mr. Cahanin served as a Senior Life Safety Engineer with the National Fire Protection Association (NFPA), the organization that writes Fire Protection Codes and Standards. He was staff liaison for building construction standards and the Fire Prevention Code. Special project work included support of the International Division of NFPA in a survey of fire protection for all oil production facilities of LaGoven SA in Venezuela; an evaluation of the existing airport terminal in Rio De Janeiro, Brazil; and a code comparison study for the National Institute of Building Sciences. Mr. Cahanin investigated multiple fatality fires for NFPA and his reports are nationally published and peer reviewed. Mr. Cahanin holds Professional Grade Membership in the Society of Fire Protection Engineers. Mr. Cahanin has earned three undergraduate degrees in Fire Science and Fire Protection and a Master in Public Administration.

Litigation Support - Mr. Cahanin regularly testifies in fire cases offering opinions on the origin and cause of fires in addition to component failures in construction, fire sprinkler systems, kitchen suppression systems and product failures. He is nationally published on fire protection requirements in the building code as a contributing editor on the 2006 edition of the International Building Code (IBC) Commentary where he edited the sections on fire-resistance rated construction. He currently serves on code committees with both the NFPA and ICC. Mr. Cahanin holds a NALA paralegal certification and is well versed in Civil Procedure, interrogatory, expert report writing, and trial procedures. 

Mr. Cahanin meets the professional qualifications of NFPA 1033, Standard for Professional Qualifications for Fire Investigator as documented in a Florida Declaratory Statement held by no other fire expert in the state of Florida. Investigations of note include the Warwick. R.I. Station Nightclub Fire in 2003 with 100 fatalities. In Wyatt v. Security Alarms Co., Inc. key testimony on the failure of a Viking automatic fire sprinkler established a product liability that resulted in a $1.4M dollar jury award for Wyatt in Oklahoma. Mr. Cahanin's services are available to plaintiff and defendant attorneys. Case work can include site investigation, materials testing, thorough reporting, depositions, and trial testimony.

Areas of Expertise:

Fire Origin and Cause Determination Kitchen Fire Suppression Systems Fire Hazard Analysis Fire Sprinklers Fire-based Construction Defects CPVC Sprinkler Pipe Failure

Fire Walls and Compartmentation Life Safety Egress & Compliance Fire & Building Code Compliance Explosion Analysis and Cause Fire Alarm Failures Walking Surface Slip Trip & Fall

View Cahanin Fire & Code's Consulting Profile.

Anthony S. Boom is an Electrical Engineer and Escalator Controls Expert Witness with over 35 years in the escalator business. Currently providing expert witness services though Cetek, Inc., he spent the last three decades working as an Electrical Engineer with Montgomery Escalator and KONE R&D, escalator division.

Three patents Mr. Boom received while working at Montgomery and at KONE include one for Safety Switch and Method of Checked Redundancy, utilized in all of the current transit escalator safety circuits; an Apparatus and Method for Variable Torque Braking of Escalator and Moving Walkways; and a Method and Conveyor System for KONE Sleep Mode Controller.

Litigation Support - Mr. Boom offers expert witness services to attorneys representing plaintiff and defense. Services include expert witness testimony, written or oral affidavits, site inspections, technical investigations, technical review documentation, etc. 

Areas of Expertise:

Electrical Engineering Escalators Vertical Transportation Electrical Controls Escalator Control Circuitry Logic Escalator PLC Control Software Program Logic

Escalator Brake Control Escalator Braking Systems Escalator Safety Escalator Safety Circuits Moving Walkways National Electrical Code

Background Experience and Accomplishments:

• Designed and developed many custom escalator electrical controls. He also designed and wrote the code for Montgomery Escalator and KONE escalator controls, including the controls for the Trans 180 escalator platform (the ES373’s model).
• Developed diagnostic guides for escalator controllers and braking systems and technical bulletins for all aspects of the escalator electrical control system.
• Oversaw the CSA certification of the escalator control and brake systems.
• Supervised and trained electrical and mechanical engineers.
• Provided tech support to KONE personnel regarding Otis controls and performed power studies on a variety of Otis escalators. 

Selected Case Experience:

• 2022: Escalator at department store, PA: Alleged injury on escalator.
• 2023: High rise transit escalator, NY: Ongoing.
• 2023: Public transportation escalator, NY: Ongoing.  See CV for Full List

Thomas J. Young, PE, has over 39 years of experience in national and international Transportation Construction, the Civil Engineering specialty regarding highways, bridges, rail, airports, harbors, and associated infrastructure.

Mr. Young is a skilled integrator of the parameters of program and project life cycles, leadership, management, business operations, engineering and construction. He has extensive knowledge of regulatory compliance, environmental processes, industry standards, best practices, and field operations in urban and remote areas.

Mr. Young has broad construction management and design background for many of the knowledge and skill areas required in mining operations, bridges, highways, land development, major soil/structure type facilities, land survey, and construction surveying, including work in Arctic facilities and in desert regions.

Selected Background Experience:

• Completed 34 bridge structure designs, seismic retrofits, and special studies, including large cut and cover tunnels and numerous other complex structures for the $700 million design/build Eastern Transportation Corridor toll roads in Orange County, California
• Bridge construction oversight on $1 billion Cypress Corridor reconstruction in Oakland, California. 
• $10 million Sunrise/Highway 50, and $40-$50 million Douglas/Interstate 80 Interchange and Corridor designs in Sacramento, California.
• Bridge and highway project development duties in Caltrans Districts 1-5, 7, 10-12.

Thomas J. Young: PowerTeam Interview

Litigation Support - Mr. Young can act as an expert witness in all cases related to Forensic Transportation Construction Engineering. A persuasive communicator skilled at negotiating successful outcomes to complex situations, his expertise at analysis, problem solving, and bringing parties together in the public and private sectors is an asset in his performance in forensic engineering and expert witness testimony.

Areas of Expertise:

ADA Violations Architecture Bridges Building Codes Civil Engineering Construction Accidents Construction Claims Construction Defects Construction Failure Analysis Construction Injuries Construction Safety / OSHA Cost Estimating / Overruns Design Codes Design Engineering Drainage Driving Human Factors Engineering Quality Assurance Fall Protection Forensic Engineering Investigation Geotechnical Engineering Highway Engineering

Highway Safety Hydraulics and Drainage Hydrology Industrial Facilities  Land Development Land Surveying Landscape Architecture Management Professional Responsibility Public Works Sewers Signage Strategic Planning Structural Engineering Structural Engineering  Failures Surveys Temporary Structures Traffic Safety Transportation Transportation Construction

View Civ-Tek International's Business Consulting Profile.

Since 2010, Craig Moskowitz, MBA, MS, PE, the President and Managing Member of CLM Engineering Associates, LLC (CLM), has been concentrating the comapny's focus on forensic engineering/expert witness work for the insurance industry and legal community. In addition, they offer construction management, civil engineering and building inspection services. 

CLM has extensive construction management experience on both commercial and residential projects. Projects have included:

•  Safety inspections on both civilian and military projects through application of OSHA regulations. Designed drainage systems for the government while an officer with the United States military. Cost estimating for various projects exceeding $500 million<li>
• Designed document creation and management of high-rise construction in Manhattan
• Management of telecommunications projects for Verizon in Manhattan including CPM schedule creation and updating
• Directed and managed all water distribution system and sewer system work while working as a contractor to the New York City Department of Design and Construction. 
• Marketplace Services

Litigation Support - Forensic work related to evaluation of structural steel systems with commercial building construction and insurance-related claims due to storm damage on commercial and residential structures. Craig Moskowitz has been deposed several times in litigation matters. Mr. Moskowitz has testified 17 times in the past four years. 

View Craig Moskowitz's Consulting Profile.

Jayson Uribe, Vehicle Investigator, is an active Firefighter with the Napa County Fire Department, as well as a professional Driver and Instructor at Sonoma Raceway and the Allen Berg Racing School at Laguna Seca. 

Mr. Uribe owns and operates a private investigation company, Code 3 Consultations specializing in professional driver coaching, autonomous research and development, vehicular analysis, scene recreation, motorcycle accidents, and expert witness testimonies. In a consulting capacity, he has worked with such companies as Allen Berg Motorsports (ABMS), Sears Point Racing Experience (SPRE), Skip Barber Racing Schools, American Supercamp (ASC), Waymo Technologies, Faction Tech Co., Mercedes-Benz USA/GER, etc.

Heavily involved in the motorsports industry for almost 20 years, he has in-depth knowledge and first-hand experience with any and all modern safety systems and how they operate. He has the mechanical knowledge to be able to decipher the validity / integrity of a potentially compromised system which may have been associated with an incident.

From a driver standpoint, Mr. Uribe uses his experience as a performance driving instructor to properly break down and analyze the actions taken by an individual to determine if any malicious intent was involved. Essentially, he is the one you call when you have a traffic accident that requires more than just an on-scene report from an officer. 

Litigation Support - With nearly 20 years in the motorsports industry, 5 years in accident recreation and autonomous vehicle R&D, and 8 years in a coaching / teaching role, Jason Uribe is uniquely qualified to assist in complex accidents. His services include on-site accident investigation, thorough reporting, depositions, and trial testimony as needed.

Areas of Expertise:

Motorcycle / Vehicle Accident Analysis Accident Scene Recreation Vehicle Safety Systems and Operations R&D for Autonomous Vehicles

Safety Training for Emergency Vehicles Safety Training for Private Security Details Stunt Driving Train the Trainer

View Jason Uribe's Consulting Profile.

Michael A. Pollock, PE, USPTO, is a Mechanical Engineer responsible for the design and engineering of commercial, industrial, manufacturing, institutional, and residential venues, as well as efforts relating to services and products used in and around these facilities. Mr. Pollock's full CV can be viewed at cogentexpert.com.

Business and industries include electronics, safety and construction, building materials, polymers and plastics, instrumentation manufacturing, petrochemicals, chemicals, pharmaceuticals, colleges, athletic facilities, textiles, coatings and resins, food storage, biosciences, supermarkets, inks & pigments, automotive, facility and real estate operations, agricultural, transportation, nuclear, healthcare, nutrition, retail, distributors, pulp and paper, packaging, utilities, apparel, and R&D centers.

Litigation Support - Mr. Pollock is a subject matter expert in Commercial and Industrial Engineering Applications and Projects, as well as engineering standards and applicable codes (ASHRAE, ASME, NIST, NFPA, NBIC, ASTM, SAE, LEED, ASCE, GMP, ISA, BOCA, and EPA Regulations.) He has engaged with local, state, and governmental officials and agencies regarding numerous matters over his commensurate years of experience.

Areas of Expertise:

Investment Engineering Economics Mechanical Engineering Standard of Care Architectural Standard of Care Construction Delay Construction Defect Construction Schedule Analysis Accident Analysis Metallurgical Failure Rotating Equipment Electrical Failure Chemical Failure Processes Instrumentation and Controls

Chillers Coatings Refrigeration Thermodynamics Water Treatment Steam Systems and Boilers   Power and Utilities Energy Conservation Environmental Impact Safety HVAC Project Management Product Development

Registrations

• Professional Engineer: PA (PE075410)
• American Bar Association (ABA) – Construction Forum
• Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration)
• United States Patent & Trademark Office Registered (USPTO)                              

Forensic Consulting Experience

Warehouse Distribution Facility – Maryland - Evaluated a $10M (million) claim relating to purported construction defect claims by the 600,000 sq. ft. facility owner against the facility construction contractor and an original equipment manufacturer relating to installed infrastructure in the facility. Developed an expert opinion and expert report regarding the analysis of the purported defects and a proposed repair solution to correct said defects. 

 Psychiatric Hospital Facility – North Carolina – Evaluated a $28M (million) construction claim by the general contractor against a hospital facility concerning a $100M facility construction project.  Developed an expert opinion and report for general construction issues, constructability, design revisions, and corresponding delay analysis for mechanical, HVAC, electrical, smoke and fire, structural, security and building automation systems. 

Forensics Consulting Work-in-Progress 

• 2022 – International Trade Commission (ITC) Matter – Resin Manufacturing Facility Construction Delay / Completeness Analysis
• 2022 – Mechanical Systems Coatings Matter Analysis
• 2021 – Industrial Manufacturing Facility Standard of Care Matter, Construction Defect, Construction Delay     
• 2021 – Electrical Distribution System Construction Defect Matter, Standard of Care
• 2021 – Hotel Facility HVAC Materials of Construction Related Defect Matter

" WHO IS AN EXPERT?
ONE WHO HAS ACQUIRED COMPREHENSIVE SPECIFIC EDUCATION,
ADVANCED AND CONTINUING TRAINING, AND EXTENSIVE SPECIFIC
EXPERIENCE TO GAIN THE KNOWLEDGE AND AUTHORITATIVE ABILITIES
REPRESENTING THE MASTERY OF THE SPECIFIC FIELD AND OF THE SUBJECT."

Nation Wide and International Expertise.

Timothy G. Galarnyk: Educated in Construction and Safety.  Continued Training in Construction and Safety. More than 45 Years of HANDS-ON Field Experience. Actively involved in construction since 1976. Equipment operator, member of International Union of Operating Engineers since 2004, Certified by ATSSA in Construction Work Zone Traffic Control - MUTCD since 1988. More than 1,000 Incidents Independently Investigated. 

Traffic Crashes in Construction Work Zones - Related to MUTCD Compliance. CERTIFIED by ATSSA in Work Zone Traffic Control since 1988. 

Construction Risk Management, Inc., is a corporation with experts in construction safety, structure collapses, construction means and methods, and construction work zone traffic control.  Investigation focuses on:

Bridges, Buildings, Residential, Industrial, Commercial, High-Rises, Marine, Highways, Underground, Water, General and Subcontractor Issues

Litigation Support - We conduct Forensic Investigations of Construction Accidents / Injuries / Deaths to establish the Cause. What happened? How did it happen? Where and When did it happen? Why did it happen? Who is Responsible? Depositions and Trial Experienced. State and Federal Courts. Defense and Plaintiff - Makes no difference as the case facts and evidence rules. 

Areas of Expertise (include but not limited to):

Scaffolding Cranes Rigging Earth Moving Equipment Aerial Lifts Forklifts Trenching / Excavating Falls Steel Erection Electrical Injuries / Electrocution

Confined Spaces Concrete Work OSHA Issues Bridge / Building Structural Collapse Trucking of Construction Material Steel Materials Reinforcing Bars Concrete Pilings Loading / Unloading Injuries

Dr. David A. Rockstraw, PE, is a distinguished figure in the fields of Chemical Engineering and Intellectual Property, with an impressive blend of academic and professional credentials. He has over 30 of years of experience in chemical processing and phenomena in industry, national labs, academia, and private consulting.

Dr. Rockstraw is the former Robert Davis Distinguished Professor and Academic Department Head of Chemical Engineering, Interim Academic Department Head of Mechanical & Aerospace Engineering and Creator and Director of Brewery Engineering at New Mexico State University, with over a decade of experience in the chemical process industry and national labs. 

Litigation Support - Dr. Rockstraw has supported NSF grants as a co-PI and consultant, testified in trials, arbitrations, and depositions on dozens of occasions, and has the experience of over 80 expert witness engagements and over 30 technical consultant engagements, the majority involving patent infringement, trade secret theft, and patent validity.  Work on these cases has frequently required Rockstraw to perform laboratory research or direct full-scale plant tests to collect the evidence needed to support a client’s position. He is a clear communicator, skilled educator, having experience in a wide range of chemical manufacture processes. Dr. Rockstraw is licensed in TX, NM, and CA.

Areas of Expertise:

Chemical Engineering Materials Engineering Chemical Plants Process Analysis / Forensics Chemical-related Intellectual property & Trade Secrets Explosions / Fires Chemical Safety /Hygiene Matters (Chemical and Materials Phenomena) Water

Petrochemicals Pharmaceuticals Agricultural Chemicals Fluorochemicals; Monomers, Polymers and Plastics Plutonium Processing Membrane / Electro Membrane Processes Biofuels Processed Foods

Dean Tekell Consulting provides expertise in the areas of Traffic Engineering, Parking, Public Transit, Vehicle Dynamics, Accident Reconstruction, and Technical Accident Investigation.

Often, government agencies, consulting engineers, architects, developers, business institutions, and attorneys must know how to move people and their goods safely and efficiently. The firm offers advice on site selection, traffic access, and traffic circulation on the site. The firm provides insight into potential problems with zoning and subdivision regulations. Traffic impact studies, traffic signal warrant analysis, traffic signal design and permitting services related to development activity are also available through the firm. Parking garage and parking lot operations are specialties offered to business institutions.

Other services include: Queuing Studies for drive-through services; Traffic Calming and neighborhood speed control; School trip and pedestrian safety plans; Traffic Accident Reduction and highway safety techniques; Transit Funding Operation; Intelligent Vehicle-Highway Systems.

Randy Phares is an expert in Packaging, specializing in Corrugated, Crating, Baling, Shipping, Warehousing, Manufacturing Safety and Load Securement. He has over 30 years of progressive leadership experience in Packaging, Procurement, Shipping, Lean Manufacturing, Quality, Safety, Productivity, and Business Improvement.

Since he began his career in 1990, Mr. Phares has held almost every job in packaging operations. These include manufacturing, distribution, sales, design, safety, transportation, and running entire multinational business units for a Fortune 1000 Corporation. He has worked on projects in Asia, Jamaica, Afghanistan, Latin America, Eastern and Western Europe, USA, and Canada.

Mr. Phares has run packaging testing labs, design centers managed fleets of trucks, manufacturing machinery, and managed world class packaging manufacturing operations. He is a published international author, and speaker who was the President of the South Texas Manufacturers Association. He is a Packaging and Procurement Subject Matter Expert since 2019 saving over $10 million for SGS-Maine Pointe the #1 Supply Chain Consulting Firm according to Consulting.us and one of America’s Best Management Consulting Firms of 2022 according for Forbes Magazine.

Honors and Awards - Best Achievement of Organizational Business Improvement in Manufacturing Award presented by the Global Six-Sigma and Business Improvement Awards for an extensive plant turnaround for Temple-Inland (now International Paper). Best Performing Plant Award for 4 consecutive years out of 26 plants for Gaylord Container (now International Paper).

Litigation Support - Randy Phares is a leading Packaging and Load Securement Subject Matter Expert relied upon for his experience, knowledge, and in-depth understanding of packaging, logistics, manufacturing, distribution, freight, and intellectual property. He performs forensic analysis and testing of packaging failures, loading, unloading and distribution failures that caused damage or injury. His services include thorough reporting, depositions, consulting, and trial testimony as needed.  

Cases involve crated, palletized, banded or boxed products, or boxed products loaded in railcars, trucks, vans or parcel trucks, warehoused, transported (loaded, or unloaded), or injury using a pallet jack, forklift, or by hand.

 Areas of Expertise: 

Corrugated Packaging Folding Carton Packaging Boxes Crates Pallets Pallet Jacks Warehousing   Packaging Logistics

Packaging Distribution Manufacturing Load Securement Freight - Rail, Trucking, Air Packaging Workplace Safety Packaging Product Liability Packaging Intellectual Property Packaging Design

View Randy Phares' Consulting Profile.

Paul Eason is a Licensed Professional Engineer, Nationally Certified Fire & Explosion Investigator and Forensic Consultant. His expertise comes from a strong background in industry and academia. In addition to his consulting practice, he is a professor in the School of Engineering at the University of North Florida, and maintains a graduate faculty appointment in the Materials Science and Engineering Program at the University of Florida. 

Dr. Eason has testified in numerous trials and depositions in the following practice areas: 

Product Design & Manufacturing Analysis - Metallurgy & Materials - Fire & Explosions - Industrial Accidents 

Areas of Expertise: Product Liability and Materials Failure Analysis, Product Defect & Safety Issues including: Metals, Plastics, Glass, Ceramics, Corrosion, Fatigue, Overload & Material Selection 

Fire and Explosion Analysis including: cause and origin determination, product related fire causation, industrial process accidents, dust explosions, welding / brazing accidents

H. Landis “Lanny” Floyd II, PE, CSP, CMRP, CRL, CESCP, Life Fellow IEEE, has over 45 years of experience in Electrical Safety in the Workplace. His work has advanced the application of Human Factors Engineering, Electrical Technology, and Safety Management Systems in preventing occupational electrical injuries. Mr. Floyd retired from DuPont in 2014, holding the positions of Principal Consultant - Electrical Safety & Technology, and Global Electrical Safety Competency Leader. 

Click here for my current CV

Background Experience - For the past 35 years, Mr. Floyd focused on electrical safety in the construction, operation, and maintenance of industrial and commercial facilities worldwide for DuPont. This included safety management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance. From 1992 to 2014, he led the team that designed and facilitated implementation of a strategy for continuous and sustainable improvement in occupational electrical safety for DuPont Global Operations. This work enabled breakthrough performance in prevention of serious injuries and fatalities from electrical energy in DuPont facilities worldwide. In 2013, Mr. Floyd was invited to join the faculty at the University of Alabama at Birmingham, where he teaches in the Advanced Safety Engineering and Management Master of Engineering degree program. 

Litigation Support - Mr. Floyd has been providing expert witness services and litigation support for over 10 years. His expertise is available to counsel representing both plaintiff and defendant. Mr. Floyd's services include consulting, site inspections, testing, reports, depositions, and trial testimony when necessary. 

Areas of Expertise:

Workplace Electrical Safety Electrical Shock Arc Flash Electrical Safety Management Systems Electrical Codes and Standards NFPA70E & National Electrical Safety Code National Electrical Code Electrical Testing Instruments

Electrical Injury Electrocution Electrical Reliability Electrical Maintenance Electrical Construction Occupational Electrical Safety Electric Power Systems Overhead Power Lines

View Lanny Floyd's Consulting Profile.

Vincent A. Ettari, P.E., P.C. specializes in many fields of Civil, Structural, Site, Coastal, Safety & Environmental Engineering, including the Design & Analysis of:

• Structures, Buildings, Houses, Dwellings
• Foundations, Footings, Elevators, Retaining Walls, Dams
• Development Plan & Plats for Sites, Properties, and Residences
• Underground & Subsurface Chamber / Chambers
• Scaffold, Scaffolds, Scaffolding
• Site Plans & Subdivisions: Industrial, Commercial, Residential
• Roads, Roadways, Ramps, Walks, & Man Hole Cover / Covers
• Sidewalks, Walkways, Paths & Pathways
• Lighting: Lamps, Lights, Lamp Poles, Light Levels
• Luminaries & Illumination (Specifications)
• Rock Cuts & Blasting (Topography, Specification)
• Soil Slopes / Samples / Mechanics / Geotechnical Engineers
• Sanitary Facilities, Septic Systems (Board of Health Septics Approval)
• BOHA / DEP Approvals
• Water, Drains, Drainage, Sewer & Sewage Lines & Mains
• Culvert / Culverts, Manholes (Man Holes) & Catchbasins / Catch Basins
• Inspection, Supervision, and Certification of Construction
• House Inspector & Inspections
• Road, Roadway, Walk & Sidewalk Premises Liability (e.g., Steep Slope)
• Walkway, Path, Ramp & Pathway Premise Liability (e.g., Steep Grade)
• Coefficient of Friction / Slip & Fall (Snowy & Icy Conditions)
• Vertical Discontinuity / Discontinuities / Trip & Falls
• Small Ports / Port, Marinas / Marina, Marine Dredging
• Levees, Jetties, Dolphins, Piers, Sea & Flood Walls
• Wharves, Breakwaters, Bulkheads, Weirs, & Revetments
• Groins, Dikes and Waterfront Structures
• Drainage Basin Analysis, Rainfall, Floods & Flood Plain / Plains
• Flooding Controls & Control Devices
• Storm Water Runoff (10, 25, 50 & 100 Year Storms)
• Pressure & Pressures: Wind, Wave / Waves, Ice, Snow
• Rain Fall Run Off & Storm Water Pollution Treatment
• Excavation, Grading, Fills & Filling Operations (Swales, Berms, Silt Fence)
• Erosion Control, Sediment Barriers, Sedimentation / Catch Basins (Hay Bales)
• Pumps and Pump System Line & Main
• Slope, Dam, Levee, Jetty, Dolphin, Pier, Wharf & Breakwater Collapse
• Bulkhead, Weir, Revetment, Groin, Dike, Footing & Foundation Failures
• Failure of Fire Containment Wall, Elevator or Water Front Structure
• Tenement House Façade Collapses
• Code History of Existing Multiple / Multi-Family Dwelling / Building
• Application of Municipal Building, Fire & Property Maintenance Codes
• City, Town & Village Zoning, Planning, Steep Slopes & Grades, Wetland & Wetlands Ordinances
• Testimony at Board Meetings as a Design Forensics Engineer

Frank S. Ferrantello, PLS, is a New York State Licensed Land Surveyor with over 20 years of experience in Surveying, Civil Engineering, and Land Use Planning. Both his field and office Work experience have dealt with a wide range of projects and sites including residential single, multifamily, high rise municipal, utility, private and public, commercial, and industrial. Prior to and post college, 

Mr. Ferrantello worked for the firm of John P. Ferrantello PC from 1998 to 2010 and MJM engineering from 2008 to 2016. His duties consisted of performing office and field surveying, drafting, research, computations, boundary analysis, solutions, investigations and determinations. 

Mr. Ferrantello also has extensive experience in Site Planning and Subdivision Consulting, examining title records, deeds and other recorded documents such as ingress and egress, pedestrian easements, right of ways, air and development rights, vista easements, bridle paths, beach, bathing and mooring rights, covenants and restrictions, real property, zoning, and other land use principles. 

Litigation Support - A mapping professional, Frank S. Ferrantello will enhancing your case, whether it is a vehicular accident, tree collision, wrongful death, adverse possession, extreme error, or misconduct surveys and maps. He has extensive knowledge of the local Long Island zoning codes, site planning and subdivision regulations. His services are available to attorneys representing plaintiff and defendant, insurance companies, and experienced developers. 

Legal Services:

Expert Witness Testimony Environmental Consulting Legal Descriptions and Deeds Liaison for Municipalities Variance Applications Wetlands Applications Zone Changing Requests Riparian Rights

Riparian Surveys Beach Enhancements Property and Easement Descriptions Trip and Fall Surveys Photo Dynamic and Exhibit Surveys Vehicular Accident Diagrams Forensic Surveys Legal Affidavits

Areas of Expertise:

Accident Investigation Photo Analysis & Mapping Sidewalks / Walking Surfaces Slips Trips Falls ADA Compliance / ADA Design Commercial Development Construction Zones Real Estate Zoning Drainage Land Development / Site Work Land Mapping Land Surveying – PRIMARY

Land Use Planning / Site Planning Urban Design / Development / Planning Civil Engineering Sanitary Engineering Sewers Aerial Photo Analysis & Mapping Floods / Flood Studies Site Analysis DOT Rules & Regulations Highway Sight Distance Highway / Street Design

View Frank S. Ferrantello's Consulting Profile.

Dr. Kevin A. Rider, PhD, PE, CPE of Forensic Human Factors, LLC., providing forensic engineering and specializing in catastrophic motor vehicle collisions, illumination and conspicuity, driver behavior/attention/distraction, workplace safety, machine guarding, slips, trips and falls, and the adequacy of product warnings and instructions. His work focuses on identifying the Human Factors that lead to unfortunate incidents, and what should have been done to prevent them. 

Dr. Rider is a Licensed Professional Engineer and Certified Professional Ergonomist, and has studied human movements and behavior, and served as a human factors consultant since 1999, including five years teaching industrial engineering and occupational safety courses at West Virginia University. He has presented at professional conferences, both nationally and abroad, and his research is published and cited in a number of peer-reviewed journals. He continues to serve as a reviewer for conference and journal manuscripts. 

Dr. Rider has testified over 250 times, and excels at educating attorneys and jurors. His services are available to attorneys for both Plaintiff and Defense.