Trucks - Forklifts Accidents Consultants: 18

Bransford Pickett, PE, BSc, MScBA, has over 25 years of experience as a Mechanical Engineer. A California Registered Professional Engineer, Mr. Pickett holds a BSE from the University of Michigan, Ann Arbor, and a MScBA in Finance from San Diego State University. His Materials Handling and Engineering Consulting Services are offered to insurance and end user companies nationally and internationally. The combination of field expertise, engineering, and regulatory compliance experience provide Mr. Pickett's clients with a complete package of services. The depth and breadth of his expertise covers many successful design projects including commercial and military ships, many complex material handling activities, testing requirements of shipboard system, and development and implementation of compliance programs. Many of the major projects include first of a kind challenges such as the Exxon Valdez post - accident docking and structural repairs, commission testing of navy auxiliary ships’ equipment including fueling systems, the US Navy Shughart Class Container Ship Conversion program, as well as shaft and appurtenance handling on the US Navy Watson Class ships. Included in these projects were planned engineered multi - crane lifts that reached in excess of 400 tons. These projects focused on safe, economic, simple designs compliant with applicable state and federal regulations, and national standards.

Engineered Material Handling Design and Review:

• Services include single and multi-crane lift plans, material transport, and equipment testing. Design, review and analysis of supporting calculation of stresses imposed on lifting, supporting structure, and material handling equipment, and rigging gear. Equipment specification scope and review

Naval Architecture & Marine Engineering:

• Perform intact, damage and probabilistic damage stability, and structural analysis on marine structures including barges, ships, and complimentary structures in accordance with regulatory bodies; ABS, Federal or State government

Training and Compliance:

• Operator training compliance to National Commission for the Certification of Crane Operators, NCCCO, requirements for tower crane, mobile crane, overhead crane, articulating crane operator training and certification, signal person, and rigger certification
• Compliance covers applicable national and international standards that include the ABS, ASTM, ASM, ASME, ANSI, WSTDA, ALI, etc. and DIN, EN, FEM to list a few. National regulations include state and federal OSHA requirements as well as DOE, military specifications and standards

View Bransford Pickett's Expert Witness Profile.

Scott L. Turner is a highly qualified Commercial Motor Vehicle (CMV) Transportation Expert, FMCSR Regulatory and PHMSA-HMR Expert with approximately 30-years experience in the highly specialized field of CMV crashes and incidents, and 16 years as the CEO of a nationwide CMV crash & HazMat disaster response corporation. 

Mr. Turner's career includes personal response and/or investigation of over 1,000 CMV crashes, 200 cargo-tank truck crashes/incidents and a multitude of industrial setting incidents including fixed facilities, loading docks and loading rack disasters. His FMCSR and PHMSA knowledge (Federal Enforcement Training), detailed reporting and testimony can be a focal point of any civil litigation, where commercial motor vehicle crashes and/or transit incidents are at issue, with or without hazmat involvement. Mr. Turner is qualified in both the Federal Court system as well as multiple States throughout the United States and testifies on an approximate 50/50 average of Defense to Plaintiff ratio.

Areas of Expertise:

• Level 1 FMCSA Inspections
• Commercial Motor Vehicle (CMV) Post-Crash Inspection
• CMV Post-Crash Investigation
• Driver Qualifications
• HOS / Fatigue Driving
• Motor Carrier Fitness Standards
• Safety Programs
• Trucking Industry Standards
• Cargo-Tank Truck Incidents / Crashes
• CMV loading/Off-loading Cases (van, cargo-tank, flatbed)
• Flatbed, Cargo Securement Failure
• Loading Dock Incidents w/ CMV
• Forklift Incidents w/ CMV
• CMV Crash Involving Hazmats
• Loading Rack Explosions / Disasters
• Pedestrian v. CMV Incidents

Services Include:

• Litigation Support
• Trial Preparation Consulting
• Courtroom Testimony
• Commerical Vehicle Accident Investigations
• CMV, Highway Construction Zone Crashes
• CMV Loading and Offloading Investigation
• Level 1 FMCSA Audits
• Load Securement Incidents

Dan W. Wall, BSME is a Mechanical Engineer who specializes in the fields of Accident Reconstruction, Biomechanics and Motor Vehicle Injury Causation, Human Factors, and Injury Prevention in Motor Vehicle Design. Mr. Wall offers his consulting services to attorneys, vehicle manufacturers, insurance companies, cities, states, counties, and individuals, both nationally and internationally.

Background Experience:

Wall Accident Reconstruction, Inc., 1996-Present, Investigation and reconstruction of traffic collisions, highway traffic safety, biomechanics of impact trauma, injury causation, engineering analysis of design and design failure, statistical analysis, human factors, slip and falls and expert witness testimony.

For more information, visit www.wallaccidentreconstruction.com

Also view Dan Wall's article in Attorney At Law Magazine at http://attorneyatlawmagazine.com/phoenix/2014/01/17/accident-reconstruction-expert-dan-wall/

Cromack Engineering Associates, Inc., Tempe, AZ, 1987-1998, Investigation and reconstruction of traffic collisions, product liability, biomechanics, and expert witness testimony.

Martin Marietta Aerospace, Denver, CO, 1980-1987, Senior Engineer, Design and analysis of aerospace systems. Projects included Man Maneuvering Unit with special recognition by NASA, Titan 34D Missile Systems, and Strategic Defense Initiative.

Summary of Experience:

Building & Roadway Construction & Design Automotive Technology Aircraft Technology and Maintenance Motorcycle Technology and Experience Off-road Experience and Design ATV Technology and Experience Slip and Fall Heavy Vehicle Trailer Design Commercial Trailer Under-ride Guard Design

FMVSS Standards Vehicle Design and Performance Tire Design and Failure Analysis Crash Worthiness Roadside Design Signage, Lighting, and Conspicuity Environmental Conditions and Effects Animation and Computer Simulations Crash and Acceleration Testing Low Speed Vehicle Collision Testing

View Dan Wall's Expert Witness Profile.