Highways / Roads / Streets Consultants: 7

All About Pavements, Inc. (API) is capable of performing virtually any project related to Pavement Engineering. API's objective is to provide practical, innovative, and cost-effective pavement engineering solutions in the areas of design, research, management construction, repair and maintenance issues. API personnel have worked at numerous airport and roadway systems located throughout the United States and abroad.

Consulting Services:

Pavement Management Systems Non-Destructive Deflection Testing Pavement Condition Surveys Roughness / Ride Quality Testing Network and Project Level Pavement Evaluation

Geographic Information Systems Research and Software Development Technical Training Courses Asset Management Construction Consultation

Wayne J. Seiler, PhD, PE, is a Principal Engineer with All About Pavements Inc (API), with responsibility for Airport, Highway, and Port Pavement engineering and construction projects. With over 38 years of pavement engineering expertise, he is a Registered Professional Engineer in Minnesota, Illinois, North Carolina, Florida, Virginia, Maryland, and Mississippi.

Dr. Seiler has conducted pavement evaluations and developed numerous pavement designs for the reconstruction and rehabilitation of airports throughout the United States during his 38 year career. As a project manager, he has completed pavement evaluation, rehabilitation design, and pavement management work for several commercial airports, including BWI, Charlotte International Airport, Portland International Airport, Pittsburgh International Airport, O'Hare International Airport, Raleigh-Durham International Airport, Dayton International Airport, Wichita’s Mid-Continental Airport, and Montreal’s Mirabel and Dorval International Airports. These studies were accomplished through extensive records review, thorough investigations, pavement condition index surveys, nondestructive deflection testing, remaining life analyses, rehabilitation design using FAA procedures and more advanced mechanistic analyses, and life cycle cost comparisons.

In 2017, ASCE’s Transportation & Development Institute awarded Dr. Seiler with their national Airfield Pavement Practitioner Award. This award honors and recognizes practicing engineers employed in the airfield pavement engineering profession with demonstrated leadership and achievement in airfield pavement projects.

View Dr. Seiler's Expert Witness Profile.

CivTek International is an Infrastructure Solutions, Program Management and Multi-Disciplined Life-Cycle Integrator. CivTek focuses on core industries and infrastructure fundamental to the economic and physical health and well-being of all societies: Energy, Water, Air, Agriculture, Transportation, Waste Management, Telecommunications, Internet, and Ancillary Technologies necessary to more efficiently deliver and operate these industries in an environmentally friendly, safe and profitable manner.

CivTek International now has roughly $50 billion in pre-feasibility studies in estimated capital costs projects as a result of national and international relationships and exclusive agreements CivTek International holds in various infrastructure and transportation technologies. They have signed 50-year Build-Operate-Transfer (BOT) Agreements with national governments of emerging economies.

CivTek International provides expert assessment, advice, guidance, opinion, contracting, construction support, program management and design services to leaders in government, industry and the legal community. They address major challenges in complex cultural settings, environmental, economic, legislative or forensic consequence in programs and projects relating to capital infrastructure in transportation, green sustainable environmental solutions, energy, oil & gas, and industrial facilities.

Clients have included Leadership of Domestic and International Industry, CEO's and Corporate Leadership, Banks, Financial Institutions and Investors, Risk Management and Insurance Industry Leaders, Attorneys, Legislators, Heads of State, and Heads of Departments and Ministries.

CivTek Capabilities:

General Infrastructure Real Estate and Land Development Executive Aviation Charter Airport Construction / Aviation Leadership International Oil Refinery - Design, Build, Operate, Transfer Project Financing Tank Farms

Ecofreighter and Deep Sea Marinas and Terminals Mining Water Supply Transportation Construction Management Healthcare and Resort Hospitals Information Technologies Program Management Office

Principal, Thomas J. Young, PE, has over 37 years of experience in national and international Transportation Construction, the Civil Engineering specialty regarding highways, bridges, rail, airports, harbors, and associated infrastructure.

Mr. Young is a skilled integrator of the parameters of program and project life cycles, leadership, management, business operations, engineering and construction. He has extensive knowledge of regulatory compliance, environmental processes, industry standards, best practices, and field operations in urban and remote areas.

Mr. Young has broad construction management and design background for many of the knowledge and skill areas required in mining operations, bridges, highways, land development, major soil/structure type facilities, land survey, and construction surveying, including work in Arctic facilities and in desert regions.

View Thomas J. Young's Expert Witness Profile.

Indian River Construction Services, Inc., offers many services to Home Owners, Home Owner Associations, Property Managers, and Building Owners. The most licensed construction firm in the state of Florida, they consult on project and building plans to help determine suitability, feasibility and cost controls for:

New Construction - Construction Repairs - Construction Additions - Construction Remodeling - Real Estate Improvements

Indian River Construction also has extensive experience in performing Insurance Adjusting Services as Florida Licensed Public Insurance Adjusters. This means they work for you and not for the insurance company, allowing them to get the best possible insurance settlement from insurance claims, whether that be a fire, flood, or hurricane. 

Andrew Allocco, PE, Principal at Indian River Construction Services is a leading Construction Consultant, Florida Licensed Public Insurance Adjuster, and Real Estate Broker. With over 45 years of experience in his fields of expertise, Mr. Allocco's services are sought by individuals, corporations, developers, and law firms to oversee and advise on construction projects. He is the current owner of construction, real estate, and engineering consulting firms.

Background Experience - Mr. Allocco is the President of Indian River Construction Services, Inc. Prior to his current role, he served as the President of Better Homes Construction Services, Inc. of Miami, Florida, which performed in excess of 40,000 Building Inspections. A Forensic Consulting Engineer, he inspects Commercial, Residential, and Industrial Facilities before, during, and after construction. He assists property owners with complex insurance claims, some of which involve significant and lengthy litigation

Mr. Allocco is not only licensed in the State of Florida as a Professional Engineer and Licensed Public Insurance Adjuster, he holds more licenses both presently active and past than any other individual in the State, including:

BA, SUNY Maritime College, Marine Nuclear Engineering Florida Licensed Professional Engineer Florida Certified General Contractor Florida Certified Mechanical Contractor Florida Certified Air Conditioning Contractor Florida Certified Roofing Contractor

Florida Certified Plumbing Contractor Florida Certified Electrical Contractor Florida Certified Commercial Swimming Pool & Spa Contractor Florida Licensed Home Inspector Florida Licensed Solar Contractor Florida Licensed Real Estate Broker

View Andrew Allocco's Expert Witness Profile.

The four PhD and registered PEs at Miller Engineering are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. We have a dedicated office with a full time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise covers well the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering. The areas listed below are from actual projects completed in our 40 years of history. 

Vehicles Car/Truck Accident Reconstruction Crash Data Retrieval (CDR) Visibility & Reaction Time Analysis Tires, Trailers, Brakes & Accelerators Truck/Off Road Vehicle Egress/Ingress Traffic Signing and Construction Zones Electronic Vehicles Mechanical & Electrical Safety Product Safety & Analysis Machinery - Metal, Wood, Plastic Molding Machine Guarding & Safety, Robots, Automation Hazard and Risk Analysis Employee Safety Procedures – OSHA Electrical Distribution & Transmission Hazards

Warnings & Instructions Warning Labels & User Manual Design Hazard Analysis & Product Label Designs Medical Device & Drug Warnings & Instructions Inadequate Warnings Analysis Standard Compliance (ANSI Z535) Product Recall Information & Strategies Consumers/Household Safety Appliances & Tools Child Furniture, Choking, Playgrounds Swimming Pools & Exercise Equipment Recreation - ATV, Boats, Bicycles, Boards Ladder, Stair, Step and Railing Accidents Slip, Trip, & Fall Accidents CPSC Recall Information & Strategies

Chemicals Safety & Labeling NEW OSHA HAZCOM (2012) & GHS Review MSDS, SDS and Product Label Compliance Toxic Torts - Diacetyl, Asbestos, Benzene, Lead, Carbon Monoxide Vaping & E-Cigarette Health Effects Chemical Exposures & Workplace Safety Chemical Inhalation, Ingestion, Dermal Contact Contamination - Water & Environmental Manufacturing & Process Line Accidents Slips, Trips, Falls, & Entanglements Fires & Explosions Cause & Origin Investigations Gas, Vapor, & Electrical Spontaneous Combustion Vaping & E-cigarette Battery Failures Fire Control & Explosion Issues

Agriculture Tractor & Equipment Accidents Chemical Applications & Exposures Crop Storage & Harvesting Accidents Pesticides Construction Vehicle Visibility Accidents Slip, Trip, & Fall Accidents Power Tool Repetitive & Immediate Injuries Scaffolding - Cranes - Hoisting - Fork Lifts Insurance Subrogation & Forensics Accident Investigations Electrical & Fire Causation Chemical Leakage Damage Defective Equipment Injuries Premise and Process Damages

James M. Miller, PE, PhD – Founder  Dr. Miller is an Emeritus Engineering Professor at the University of Michigan. He has directly served in Washington originating several Federal OSHA safety regulations, and interacts regularly with CPSC regarding safety and product recalls. Dr. Miller often works on projects relating to compliance with occupational safety standards, provides upper management guidance on product design, recall and liability issues, and serves as an expert witness.

Mark R. Lehto, PhD – Co-Founder Dr. Lehto is a Professor of Engineering at Purdue University. He completed his Ph.D. in engineering at the University of Michigan, where he specialized in Human Factors Engineering, in particular Warnings and Labeling. Dr. Lehto specializes in knowledge engineering, warnings and instructions, structuring expert systems, accident modeling, accident statistical analysis, consumer product safety, boating safety, in-field national surveys of product usage, and product information effectiveness.

David R. Clark, PE, PhD – Co-Founder Dr. Clark is an Emeritus Engineering Professor at Kettering University. He was an engineering PhD graduate from the University of Michigan, where he specialized in human factors engineering and system safety analyses. He has a special expertise in electrical fire- and explosion-related accidents, and has extensive experience working for loss control companies, performing over 150 fire origin and cause investigations in the past few years.

Adam M. Olshove, PE, MSE – Engineering Manager Mr. Olshove has over 10 years of experience providing consulting services to industry and the legal profession. He holds an MS in Mechanical Engineering with a focus on control systems and battery modeling (2019), and a BS in Mechanical Engineering (2012), both from the University of Michigan. He has performed dozens of on-site investigations nationwide in relation to consumer product design and industrial accidents, including failure analysis and testing.

Jeffrey D. Rupp, MSE – Engineering Associate Mr. Rupp has a BS in mechanical engineering from the University of Michigan and a MS in systems engineering and engineering management from Wayne State University. Among his company affiliates is 26 years with Ford Motor Company and Volvo Car Corporation, where he was involved in crash development and crash sensing calibrations.

Rieser Building Group is a leading builder, engineer, architect, and forensic team with over 25 years of experience in management, design, and construction of over 4,000 units. These units range from custom homes, commercial buildings, and developments, to public works like Caltrans and BART construction, and roadway improvements (over 500 miles). With a full breadth of professional development services, they manage all aspects of a project, from entitlements to design to warranty.

Building Services - Design in-house, or, as licensed engineering and construction professionals, Rieser Building Group can manage an outside team of architects, civil engineers, structural engineers, and landscape architects.

Engineering and Design Services - Spearheaded by a professional Engineering & Architectural team, Rieser provides innovative designs and timely approvals in custom homes, commercial buildings, apartments, large developments, structures, topo-mapping, hydraulics, traffic engineering, and transportation engineering.

Development Services - Developing single custom-built home or a multiphase project, Rieser will expedite the development process, establish a joint venture to share costs, or purchase the project. In addition to flexible management, they conduct property feasibility studies to calculate the right mix of homes and maximize ROI. 

Mark E. Rieser, II, MS, PE, AIA, GBC, GEC, has over 30 years of experience in the Construction and Building Design industry. He provides his clients with a comprehensive knowledge of Construction Technology and Construction Standards of Professional Practice. Background Experience - President of an active Design / Build company, Mr. Rieser has managed, designed, and constructed over 4,000 units to include high-rise, single family homes, condominiums, townhomes, podiums, apartments, and commercial buildings, His experience includes construction, management, and design of over 500 miles of asphalt and roadway improvements, tunnels, San Francisco Airport, Santa Clara Light Rail, Southern Pacific Railroad, Caltrain, and BART. Mr. Rieser has an insightful understanding of Civil / Structural Engineering, Soil Engineering, Transportation / Traffic Engineering, Hydraulic Engineering, Architectural Design, Asphalt Design, Cost Estimation, Public Works Design Bidding and Estimation, General Engineering, General Building, and an Accident Reconstruction expert.

NorCal Headquarters San Jose Office 2033 Gateway Pl Suite 500 San Jose, CA 95110	San Francisco Office 425 Market St Suite 2200 San Francisco, CA 94105	SoCal Headquarters Los Angeles Office 10100 Santa Monica Blvd. Suite 300 Los Angeles, CA 90067	Sacramento Office 777 Campus Commons Rd Suite 200 Sacramento, CA 95825

View Mark Rieser's Expert Witness Profile.

Shatec Engineering Consultants provides engineering consulting services in a variety of areas including highway engineering, traffic engineering, pavement engineering, geotechnical engineering, materials engineering, forensic engineering, construction support services, and other civil engineering matters. Example services include the following:

Traffic Engineering Highway Design Standards/ Geometric Design/ Plans and Specifications Highway Specifications / Guidelines Highway and Traffic Safety Highway Safety Traffic Control Devices / Traffic Control Plans/ MUTCD Sight Distance Requirements Road and Roadside Hazards ADA Requirements Surface Conditions - Friction, Skid Resistance Road Defects Code Violations

Pavement Design/ Materials Pavement Management Geotechnical Engineering Construction Quality Construction Defects Construction Claims Drainage Requirements Hot Mix Asphalt/Modified Asphalt Structural and Pavement Concrete Standards Mass Concrete/ Thermal Control Plans/ Instrumentation Highway Repairs / Maintenance Public Agency Policies / Practices

President, Shakir Shatnawi, PhD, PE, is a nationally and internationally recognized leader in the Transportation Engineering industry. He has over 30 years of practical and extensive engineering and transportation expertise covering industry and public agencies including the Federal Highway Administration (FHWA) and the California Department of Transportation (Caltrans). He taught highway and transportation engineering at California State University.

Dr. Shatnawi served as a principal investigator on multi-million dollar transportation projects. He held various positions in Caltrans including a Senior Transportation Engineer, a Supervising Transportation Engineer and a Division Chief.  Dr. Shatnawi's education and experience demonstrates a wealth of engineering knowledge stretch in highway design, traffic engineering, pavement design, geotechnical engineering, materials and construction . As a recipient of many acknowledgements from the government, Dr. Shatnawi has an impeccable reputation within the industry for his significant professional contributions. As an expert orator, he frequently shares his knowledge at major conferences around the world. 

View Dr. Shatnawi's Expert Witness Profile.

William C. Stein, Jr., PE, CCM, has more than 45 years of Roadway / Heavy Highway Construction and Materials Engineering experience. He has a rich and varied work history that includes construction materials engineering for highways and bridges, industrial plants, high rise offices, and power plants. He has worked for private owners and general contractors as well as the Department of Transportation.

Litigation Support - Mr. Stein Offers consulting and expert services for attorneys on issues regarding road, street, highway, temporary traffic control, runway, and earthwork; asphalt, concrete, coatings and other construction materials; designs, plans, specifications, CPM scheduling (Primavera) and contract documents; right-of-way issues; and work zone safety. Licensed in Louisiana, Pennsylvania, and Texas, he performs contract performance forensic investigations and provides consulting, expert reports, rebuttals, and testimony if required.

Areas of Expertise:

Highway Construction Roadway Construction Bridge Construction Highway Engineering Materials Engineering Construction Site Work

Traffic Safety Concrete / Cement Building Contractor Liability Construction Damages Scheduling Delay and Analysis Soil Analysis

Certifications:

• Certified Construction Manager (CCM)
• Certified Primavera Basic (CPM)
• Certified Primavera Advanced (CPM)
• Certified LADOTD Structural (bridge)
• Inspector/Technician Certified Troxler
• Humboldt Nuclear Moisture/ Density Operator
• Lead Abatement
• Certified Quality Compliance Surveillance in Fossil Power Plants, Organic & Inorganic Coatings Application and Inspection
• Certified Traffic Control Supervisor
• Certified Flagger Instructor