Engineering (General) Expert Witnesses: 106

Harry Direen, PhD, PE has over 30 years of experience as an engineer Designing and Developing Systems in the Electronics and Software Industry. He has taught engineering courses at the US Air Force Academy and at the University of Colorado. Dr. Direen currently works with a research group at the US Air Force Academy developing control systems and image processing using GPGPUs for UAVs. An inventor, he holds 3 United States patents.

Litigation Support - Dr. Direen has significant experience as an expert witness supporting counsel and testifying in complex patent infringement cases. He has a broad base of knowledge in electronic and software systems gained from a long career developing a wide range of products and systems. His litigation experience also includes encryption / decryption methods associated with databases and signal processing. Dr. Direen has reverse engineered a variety of complex systems over the years, including: media players, modems, modem compression algorithms, coriolis mass flow meters, database systems, and a range of other products to support patent infringement cases generating detailed claim charts and writing expert reports to demonstrate infringement. He has successfully discovered and analyzed complex digital signal processing algorithms and pertinent operations within these products. Dr. Direen's expertise is available to counsel representing both plaintiff and defendant. He is highly proficient in explaining complex systems to laymen.

Areas of Expertise:

Electronic Systems Control Systems Embedded Systems Design and Development Databases Control of UAVs / Drones

Robotics Software Signal Processing Product Reverse Engineering Intellectual Property

View Dr. Direen's Consulting Profile.

David Smith is an experienced mechanical engineer (MS, PE) with seven issued patents. Award-winning inventor. Vice President of Alpine Engineering and Design, a mechanical engineering consulting company with clients around the United States ranging from individual inventors to Fortune 500 companies. Worked on the development of multiple successful products including among other things: aerial lifts, garbage trucks, thrill rides, ziplines, trailers, oil and gas equipment, exercise equipment, manufacturing equipment, and multiple consumer products. 

Graduated Cum Laude with a bachelor's degree in mechanical engineering. Completed a master's of science degree in mechanical engineering and an MBA with an emphasis in product development. Licensed professional engineer (PE) and certified safety professional in comprehensive practice (CSP). Certified trainer for boom lifts, scissor lifts, rough terrain, and counterbalanced forklifts. Over 10 years of experience in product development, patents, equipment safety, and risk assessments. 

Experienced expert witness having drafted over 200 reports/declarations in patent cases and catastrophic injury and death cases. Designed and built multiple custom testing devices to obtain data and evaluate opinions. Created multiple demonstratives to explain the mechanics and circumstances of accident sequences and patented devices. Testified in deposition 11 times and in trial once.

Expert Witness Services Professional Expert Reports Testing Forensic/Failure Analysis Accident Reconstruction Demonstratives Inspections/Measurements Compliance with Standards Expert Testimony Patent & Patent Related Issues Patent Searches Provisional Patent Complete with Illustrations Patent Infringement Review

Product Development Innovative Concept Multi-Industry Experience Powerful Design Tools Full Service Fabricating Materials Design Analysis Finite Element Analysis (FEA) Hydraulics, Pneumatics, Electrical Structural Integrity Tests Value Analysis

James D. Wamble, PE, RLS has over 40 years of experience as a Professional Civil Engineer and Registered Land Surveyor. During the course of his career, Mr. Wamble has worked on land planning, land surveying, or civil engineering projects in all counties of the middle and west Tennessee regions, and several counties in east Tennessee. Mr. Wamble has offered litigation support services as an expert witness in cases since 1976. In the last four years, he has testified 10 times in 7 lawsuits. These litigation cases include land planning, land surveying, and civil engineering issues. Mr. Wamble has experience with depositions, trials, hearings, and arbitrations.

Expert Witness Services Include:

Research Site Inspections Engineering Analysis Land Surveys

Survey and Civil Engineering Drawings Investigation Report Writing Exhibit Preparation

Areas of Expertise:

• Civil Engineering: Design of grading, drainage, utilities, roads, lakes, dams, detention basins, parking lots, shopping centers, subdivisions, apartments, condominiums, planned unit developments, specific plans, industrial parks, mobile home parks, mini warehouses, hotels and office building site plans; flood, drainage, and utility studies; low impact design; financial developability and constructability analysis of proposed developments; preparation of cost estimates; assisting clients in setting project budgets; designing projects to contain cost within determined project budget; construction project management, inspection, administration, and processing of contractors’ pay requests
• Land Surveying: Topographic, Route, Land, Boundary, Utilities, Aerial ground control, Engineering design, and Construction Surveys
• Land Planning: Land use/development feasibility analysis, planning and concept design of residential, commercial, industrial and municipal projects; zone change applications; planned unit development and specific plan applications; site selection consultation; and graphic presentations

View James Wamble's Consulting Profile.

Dan W. Wall, BSME, specializes in the fields of Accident Reconstruction, Biomechanics and Motor Vehicle Injury Causation, Human Factors, and Injury Prevention in Motor Vehicle Design. Mr. Wall is fully accredited with ACTAR (Accreditation Commission for Traffic Accident Reconstruction), ACTAR No. 1140.

Dan Wall has conducted scientific and engineering analysis of motor vehicle collisions since 1987 for both plaintiff and the defense in civil and criminal cases. A qualified expert witness since 1987, he has offered litigation support services to insurance companies and attorneys in Arizona, California, Colorado, Tennessee and Louisiana and has testified in both Civil and Federal Courts.

Mr. Wall's past cases have involved commercial vehicle design and analysis, insurance investigations, low speed collisions and injury analysis, motorcycle collisions and rider analysis, vehicle handling and dynamics, seat belt analysis and injury mitigation, tire failures and rollover analysis, general accident reconstruction, and roadway analysis. He has conducted human factor analysis including reaction and perception, environmental effects, and general driver behavior. With a large library and the tools needed to do all types of motor vehicle reconstruction investigations, Mr. Wall is an asset to any team.

Dan Wall currently owns and rides a Harley Davidson Ultra Electra Glide Classic motorcycle and has gone through various levels of motorcycle training. He also has extensive experience as a boat operator and Marine Instructor.

For more information, visit www.wallaccidentreconstruction.com

Also view Dan Wall's article in Attorney At Law Magazine at http://attorneyatlawmagazine.com/phoenix/2014/01/17/accident-reconstruction-expert-dan-wall/

Areas of Expertise:

Mechanical Engineering Biomechanics Human Factors Accident Reconstruction Failure Analysis Forensic Investigation Motor Vehicle Design Dynamics and Handling Motorcycles Commercial Vehicles Rollovers Signage

Conspicuity Low Speed Collisions Marine Safety Bicycles Slip and Fall Accidents Pedestrians Accidents Tire Failure Seat Belt Issues Road Defects Off Road Driving Accidents Construction Zones Product Liability

View Dan Wall's Consulting Profile.

Henry W. Stormer, IAAI-CFI(V), CFPS, is the President / National Manager for VERTEX FIRE INVESTIGATIONS LLC, a wholly owned subsidiary of The VERTEX COMPANIES LLC. His responsibilities include management of a forensic fire investigation team conducting Fire Origin and Cause Investigations nationwide for the insurance industry.

Mr. Stormer has over 37 years of experience investigating in excess of 2,300 fires and explosions both in the public (25 years) and private sectors (12 years). He is a Certified Fire Investigator through the IAAI and a Certified Public Fire and Life Safety Instructor, with both certifications recognized by the National Board on Fire Service Professional Qualifications. He is also a Certified Fire Protection Specialist through the NFPA.

Litigation Support - Mr. Stormer has served as an expert witness and is actively engaged in several legal cases related to property damage, product liability, personal injury, and criminal activity. Mr. Stormer's legal support activities have included depositions, interrogatories, mediation, arbitration, and trial testimony.

Areas of Expertise:

Fire Origin and Cause Explosions Incendiary Fires Product Liability Household Appliances / Hood Systems / Dryers Photovoltaic Arrays and Battery Storage Systems Large and Complex Fire Scenes

Vehicle Fire Investigations Subrogation Failure Analysis Evidence Collection and Preservation Fire Code Analysis and Research Crime Scene Investigations Arson Investigations

Mr. Stormer is currently licensed as a Private Investigator, Manager in: AL, CT, DE, FL, IN, KY, MD, MA, MI, NH, NJ, NY, OH, SC, TX, VT, WV with reciprocal licensing in: AL, CA, GA, LA, NC, TN and VA.

Dr. Tal Lavian holds a Ph.D. from the University of California, Berkeley, in Computer Science, specializing in Networking and Communications. He is an expert in network communications, telecommunications, Internet Protocols (TCP/IP), LAN/WAN, Streaming media, VoIP, mobile wireless, and Internet/Web technologies. He has over 30 years of experience, has invented over 120 patents, and has co-authored over 25 scientific publications. For 20 years, Dr. Lavian has researched, studied, and lectured at UC Berkeley Engineering. He has served as an industry fellow and lecturer with UC Berkeley’s Industrial Engineering IEOR, Berkeley Engineering’s SCET, UC Berkeley’s start-up accelerator, and SkyDeck, as principal investigator for CRadar.Ai and CTO for Aybell.

Areas of Expertise:

Network Communications - Telecommunications - Internet Protocols (TCP/IP) - VoIP - Streaming Media - Mobile Wireless:

• Communication Networks: Internet protocols; TCP/IP suite, TCP, UDP, IP, Ethernet, 802.3, network protocols, network software applications, data link, network, and transport layers (L2, L3, L4), packet switching, data center network architecture.
• Mobile Wireless: Wi-Fi, 802.11, Bluetooth, MAC, PHY, Wireless LAN (WLAN). Cellular systems, SMS, instant messaging (chat), mobile devices, and smartphones.
• Internet/Cloud: Internet Technologies, Web applications, HTTP, e-mail, SMTP, POP, IMAP, Java, C/C++, file transfer FTP, client-server, cloud computing, distributed computing.
• Routing/Switching: LAN, WAN, VPN, routing protocols, RIP, BGP, MPLS, OSPF, multicast, DNS, QoS, network infrastructure, and network communication architectures.
• VoIP/Streaming Media: PSTN, voice, data, circuit switching, IP telephony, VoIP, SIP, RTP, video/audio conferencing, streaming media.

Dr. Lavian brings both hands-on and academic experience to his work in Network communications, Internet Protocols, design, and architecture. 

Litigation Support:

Dr. Lavian offers expert witness services and provides courtroom presence, clear testimony, and an ability to effectively distill complex concepts into understandable basics and commonsense.

• He has extensive experience rendering reports and testifying in Federal, IPR, and ITC cases in over 140 patent-related cases.
• Past cases have involved leading companies such as Google, Microsoft, Amazon, LinkedIn, Avaya, T-Mobile, AT&T, Ericsson, Sprint, Cisco Systems, Juniper Networks, Polycom, Motorola, LG, WhatsApp, Instagram, ZTE, Huawei, Facebook, and Apple.

View Dr. Lavian's Consulting Profile.

Mehdi Tarrit Mirakhorli, PhD, is a Software Engineering professor in the department of Information and Computer Sciences at University of Hawaii at Manoa. Prior to that, Dr. Mirakhorli served as Kodak Endowed Chair, Associate Professor and Director of Research at ESL Global Cybersecurity Institute and Software Engineering Department at Rochester Institute of Technology.

Litigation Support - Dr. Tarrit Mirakhorli is a Subject Matter Expert in Public and Private Sector Litigation Matters. He has served as an expert on various litigations including SME on federal contract disputes, software trade secret misappropriation, and copyright infringements. With extensive academic experience, he excels at simplifying complex technology concepts for diverse audiences.  

Areas of Expertise:

Software Engineering / Architecture Software Design Trustworthy Software Software Trade Secrets Cybersecurity Artificial Intelligence (AI) Artificial Intelligence Machine Learning Generative AI Quality Assurance

AI-enabled Software Copyright Infringement Programming Languages and Platforms Source Code Analysis Techniques and Tools Storage and Database Cloud and Web Services Software Security Web Application Distributed Systems Operating Systems and Servers

Dr. Mirakhorli is also the director of Software Assurance Laboratory.  He has been honored with supporting the implementation of President Biden's Executive Order on Improving the Nation's Cybersecurity. 

Dr. Mirakhorli has been an ALTA Distinguished Speaker at Alcatel-Lucent, and has delivered numerous technical briefings to public policymakers, members of Congress, government officials, and the general public. He has carried out various projects of national importance and supported organizations in responding to investigations including OIG.  

Bransford Pickett, PE, DFE, BSc, MScBA, has over 25 years of experience as a Mechanical Engineer. SEFS expertise includes design and review of material handling equipment, material handling management, and ship board systems. SEFS offers litigation support services for Accident Investigation and Reconstruction covering failure analysis, process simulation, regulatory compliance, equipment reliability, and personal injury / safety. His materials handling and engineering services are offered to attorneys, insurance and end user companies nationally and internationally.

Mr. Pickett is a member on the American Society of Mechanical Engineers B30 committee on Safety Codes and Standards for cranes and rigging as well as a member of several subcommittees. He is also a member of American Society of Mechanical Engineers P30 Committee- Planning for the Use of Cranes, Derricks, Hoists, Cableways and Lifting Accessories. ASME BTH Standards Committee.

Mr. Pickett is a Professional Engineer, and holds a BSE from the University of Michigan, Ann Arbor, and a MScBA in Finance from San Diego State University, as well as a board certified Diplomate Forensic Engineer. He has qualified as an expert witness in the State of New York Supreme Court and the State of California Supreme Court.

Accident Investigation:

• Man baskets, Forklifts, Scissors Lifts, Aerial Lifts, Rigging Gear, Hydraulic Jacks, and Hydraulic / pneumatic Lift Systems, Automotive Lift Systems, Conveyors, Pallet and Packages Conveyors, Pneumatic Systems, Machine tools, Boats, Barges, and Elevators
• Tower, Mobile, Bridge, Truck, Portal, Container, Jib and Floating Barge Cranes, and Derricks
• Operator training compliance to National Commission for the Certification of Crane Operators, NCCCO, requirements for tower crane, mobile crane, overhead crane, articulating crane operator training and certification, signal person, and rigger certification
• Compliance covers applicable national and international standards that include the ABS, ASTM, ASM, ASME, ANSI, WSTDA, ALI, etc. and DIN, EN, FEM to list a few. National regulations include state and federal OSHA requirements as well as DOE, military specifications and standards

View Bransford Pickett's Consulting Profile.

Thomas W. Caldwell, PE, has over 40 years of experience in Materials Research and Development, Process and Product Development, and Manufacturing Operations in the Precision Cast and Machined Products industry.

Mr. Caldwell has designed and manufactured components for consumer and industrial products, including safety-critical applications such as aircraft landing gear brakes, seat belt lockup devices, windshield wiper, and window lift motor systems. He has experience creating and guiding technology development and manufacturing partnerships in Europe and Asia, licensing and selling intellectual property and creating supply chains in China.

Mr. Caldwell has lectured in the USA, Germany, Switzerland, and India on manufacturing premium quality metal products and manufacturing processes, and was a technical paper peer reviewer for 20 years for the Society of Automotive Engineers. A United States patent holder, he has published peer reviewed research in electrochemistry and materials processing, and has written and spoken numerous times on the subject of Materials Selection.

Litigation Support - Thomas W. Caldwell, PE, is a testifying and consulting expert for both plaintiff and defense counsel. His cases involve product failure for ferrous and non-ferrous alloy products such as hand tools, recreational and exercise equipment, fire fighting apparatus, rotating industrial machinery, construction hardware, piping, and lighting fixtures. Mr. Caldwell utilizes destructive and non-destructive methods for insuring product integrity.

Areas of Expertise:

Design Engineering Materials Failure Analysis Materials Engineering Mechanical Engineering Metallurgy Power Tools Products Liability Design Defects

Manufacturing Defects Fitness for Use Equipment Operation and Maintenance Accident Reconstruction Material Selection Manufacturing Process Design and Scale Up Safety Component Product Quality Control Safety Component Quality Systems Management

View Thomas A. Caldwell's Consulting Profile.

Mechanical Engineer - Turbomachinery Expert. Gas turbine engines, steam turbines, jet engines, compressors, pumps, expanders, generators, cogeneration, combustion equipment, diesel engines, and reciprocating compressors. 

Failure analysis, stress analysis, mechanical design, design analysis, troubleshooting, performance analysis, durability assessment. Access to metallurgical laboratory. Experienced Expert witness. 

Please see our Service List at https://sbkushnick.com/servicelist.pdf for a concise description.

William C. Stein, Jr., PE, CCM, has more than 45 years of Roadway / Heavy Highway Construction and Materials Engineering experience. He has a rich and varied work history that includes construction materials engineering for highways and bridges, industrial plants, high rise offices, and power plants. He has worked for private owners and general contractors as well as the Department of Transportation.

Litigation Support - Mr. Stein Offers consulting and expert services for attorneys on issues regarding road, street, highway, temporary traffic control, runway, and earthwork; asphalt, concrete, coatings and other construction materials; designs, plans, specifications, CPM scheduling (Primavera) and contract documents; right-of-way issues; and work zone safety. Licensed in Louisiana, Pennsylvania, and Texas, he performs contract performance forensic investigations and provides consulting, expert reports, rebuttals, and testimony if required.

Areas of Expertise:

Highway Construction Roadway Construction Bridge Construction Highway Engineering Materials Engineering Construction Site Work

Traffic Safety Concrete / Cement Building Contractor Liability Construction Damages Scheduling Delay and Analysis Soil Analysis

Certifications:

• Certified Construction Manager (CCM)
• Certified Primavera Basic (CPM)
• Certified Primavera Advanced (CPM)
• Certified LADOTD Structural (bridge)
• Inspector/Technician Certified Troxler
• Humboldt Nuclear Moisture/ Density Operator
• Lead Abatement
• Certified Quality Compliance Surveillance in Fossil Power Plants, Organic & Inorganic Coatings Application and Inspection
• Certified Traffic Control Supervisor
• Certified Flagger Instructor

Dr. Shakir Shatnawi, PhD, PE, is a nationally and internationally recognized expert in the Transportation Engineering industry. Shakir has a Ph.D. in Transportation Engineering. He has over 30 years of practical and extensive engineering and transportation expertise covering industry and public agencies including FHWA and the California Department of Transportation (Caltrans). 

Shakir is currently the president of Shatec Engineering Consultants. He taught highway engineering, traffic engineering and transportation engineering and pavement design at California State University. Dr. Shatnawi served as a principal investigator on multi-million dollar transportation projects. He held various positions at Caltrans including a Senior Transportation Engineer, a Supervising Transportation Engineer and a Division Chief.

 Dr. Shatnawi's education and experience demonstrates a wealth of engineering knowledge encompassing highway design, traffic engineering, pavement design, geotechnical engineering, materials and construction . As a recipient of many acknowledgements from the government, Dr. Shatnawi has an impeccable reputation within the industry for his significant professional contributions. As an expert orator, he frequently shares his knowledge at major conferences around the world. Dr. Shatnawi provides expert witness services in the following areas:

Traffic Engineering Highway Design Standards Highway Specifications / Guidelines Public Agency Policies / Practices Pavement Design / Materials Construction defects Highway Geometric Design Drainage Asphalt Concrete Highway Repairs / Maintenance

Construction Quality Control / Quality Assurance Construction Claims Surface Conditions - Friction, Skid Resistance Road Defects Traffic Safety Highway Safety Traffic Control Devices / MUTCD Sight Distance Requirements Roadside Hazards ADA Requirements Code Violations

View Dr. Shatnawi's Consulting Profile.

Robert (Bob) Ryan, PhD, PE, is a Senior Estimator with Heavy Civil Construction experience including bridge / structures, paving, foundations, marine, and grading work. He has over 15 years of experience working within the construction industry, primarily in operations and estimating. He has completed projects totaling more than $2 billion, and was directly involved in multiple projects receiving national merit.  

Bob has led projects involving bridges, roads, marine structures, rail, tunnels, airports, and light industrial. His project management experience has led to the development and deep understanding of schedules, standardized cost estimating approaches, subcontractor management, contracts, procurement, project completion, and Disadvantaged Business Enterprise (DBE) programs compliance issues.

Litigation Support -  Working as a contractor, engineer / consultant, and owner in the heavy-highway sector gives Bob the ability to see all sides of complex contractual issues. He has been involved in cost escalation claims and economic impact analysis related to volatile market conditions. He has experience working on large, complex heavy highway projects and has the skills and knowledge necessary to provide expert testimony in these cases.

Bob has advised attorneys for both plaintiff and defendant, and executive levels of DOTs and contractors alike. He has led and supported expert analysis on claims exceeding $100 million.

 Areas of Expertise:

Dispute Resolution Disadvantaged Business Enterprise (DBE) Issues Good Faith Effort (GFE) Claims Contract Issues Cost Estimating Contractor Performance

Contractor Means and Methods Construction Planning and Scheduling Construction Defects Forensic Schedule Analysis Financial Damages Preparation and Evaluation Code Compliance

Background Experience - Bob’s professional roles have included project controls, field engineering, superintendence, project management, and estimating. In his 10 years as a contractor, he held roles from field operations to estimating. As a consultant, he managed projects ranging from $1M to $300M. As an owner’s representative Bob was responsible for complete cost estimates averaging $2B. Bob is currently a faculty member at Oregon State University in their Construction Engineering Management program. 

Bob has successfully balanced completing his multiple degrees while exceeding goals as a full-time professional. His dissertation involved economic analysis of cost variance for over 12,000 projects. His coursework was a blend of project management, civil engineering, accounting, economics, and statistics. He is experienced in a wide variety of alternative delivery methods such as design-build, public-private- partnerships (P3) accelerated bridge construction, job order contracting, and negotiated lump sum.

Gary D. Fletcher, PhD,  is the Founder and Principal Consultant at RnDDx Solutions LLC, a consulting firm founded in 2015, focused on Industrial Mechanical Engineering and Biomedical Engineering and Research and Product Development.  In his 30 years of experience, he has been co-inventor on 23 patents for devices and methods in blood collection and processing.

Litigation Support - Dr. Fletcher has subject matter expertise in Medical Device Mechanical Engineering and subject matter expertise in Medical Devices for blood and specimen collection and sample processing for in vitro diagnostics, point of care diagnostics, and therapeutics, including glucose monitoring. He serves as an expert witness in patent infringement cases involving medical device and diagnostic biomedical engineering, blood collection, separation, fluidic preparation, glucose monitoring, and cell therapy preparation devices.

Dr. Fletcher offers patent litigation services to law firms and lawyers supporting medical device and diagnostic industry clients, who need physical science and mechanical and biomedical engineering expertise for District Court, PTAB, and ITC patent cases. As an industry consultant, his ideal clients are R&D, product development, and innovation leaders in startup, emerging, and established medical device and diagnostic companies, who face product development and competitive challenges.

Areas of Expertise:

Mechanical Engineering Biomedical Engineering Medical Devices Product Development Clinical Diagnostics Blood Collection Blood  / Cell Separation Needles / Lancets Biospecimens Point of Care Testing Microfluidics

X-Ray Spectroscopy Cell Therapy Intellectual Property / Patent Infringement Microscopy Physics Biomedical Sensing Optics Imaging Mathematics Glucose Monitors Lasers

Dr. Fletcher is an entrepreneurial executive with expanding R&D roles in business, technology, and new product development leadership and execution, building and guiding teams in both Fortune 500 and startup companies. With a PhD in physics from Yale, he has a proven record of leadership in creating innovative new businesses and products in healthcare, medical devices, diagnostics, life, materials, and optical sciences.

Christopher M. Daft, PhD, is an award winning, Oxford Educated scientist whose areas of expertise include medical imaging, artificial intelligence, semiconductors, medical devices, sensors, MEMS, signal processing, and image processing. He holds 23 United States Patents with 20 applications pending, Dr. Daft has diverse industry experience including multi-nationals such as GE, Medtronic, Fujifilm, Samsung, and Siemens as well as several start-ups. 

He has testified at trial 5 times and been deposed 14 times.

Dr. Daft has been an Institute of Electrical and Electronic Engineers (IEEE) Senior Member since 2004. He has three years of experience teaching electrical and computer engineering at the University of Illinois. 

Dr. Daft holds a BA and MA in Physics from Oxford University as well as Doctorate from Oxford in Materials Science.

Litigation Support - Dr. Daft provides litigation support in the areas of Intellectual Property and Medical Devices including Imaging, particularly Medical, Patents, and more. His experience includes a variety of cases in the areas of wearable electronics, imaging systems, and surgical technology. Dr. Daft has extensive deposition and trial testimony experience.

Areas of Expertise:

Design Engineering Electrical Engineering Electromagnetic Engineering Microelectronics Medical Imaging Electronics Semiconductors

Medical Devices Sensors Software Engineering MEMS Signal Processing Image Processing Physics

View Dr. Christopher Daft's Consulting Profile.