Chemistry: Analytical Chemistry Consultants: 6

Dr. Charles R. Anderson has long specialized in the Characterization of Surfaces, Interfaces, Thin Films and Coatings. He and his team offer Materials Consulting Services, enhancing material and/or process to meet requirements and provide advantages over competitors. 

Dr. Anderson is able to apply decades of experience, cross-industry knowledge, and diverse areas of expertise to serve as a cost-effective partner to enhance or augment current R&D capabilities or capacity. Anderson Materials (AME) is prepared to deploy an array of analytical techniques and experiences to provide top-tier analysis and consulting services. 

AME offers services to such industries as Aerospace and Defense, Building Materials and Construction, Chemical, Communications, Consumer Goods, Electronics, Energy & Utility, Government Agencies, Industrial Equipment, Medical Industries, Resource Materials, and Colleges and Universities. 

Consulting Specialties:

Adhesive Bonding Cleanliness & Contamination Coatings CTE, Thermal Expansion Elemental Analysis Glass Transition Temperature Interfaces Materials Identification / Verification

Medical Devices and Prostheses Melting Temperature Outgassing and Water Content Particle Analysis Plastic Testing Surface Chemistry Surface Roughness Thin Film Analysis

View Expert Witness Profile.

Dr. David W. Riley is an Extrusion Analysis & Plastics Rheological Consultant. Dr. Riley has spent over nineteen years as a consultant in the field of Plastic Processing. He has over forty years of experience in developing Polymer Defect Technology and fifteen years in developing the field of Plastic and Polymer coefficient of friction related to the feed section of the extruder.

Areas of Expertise:

• Expert Witness
• Analytical Instrumentation Adaptation to Processing Equipment
• Friction Analysis
• Melt Rheology
• Extrusion Equipment: Design & Analysis of Production
• Telecommunication Cables and Insulation
• Power Cables and Testing XLDPE
• All phases of PVC Compounding & Extrusion
• Thermal Stability of Polymers
• Surface Chemistry, Metals & Polymers

The four PhD and registered PEs at Miller Engineering are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. We have a dedicated office with a full time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise covers well the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering. The areas listed below are from actual projects completed in our 40 years of history. 

Vehicles Car/Truck Accident Reconstruction Crash Data Retrieval (CDR) Visibility & Reaction Time Analysis Tires, Trailers, Brakes & Accelerators Truck/Off Road Vehicle Egress/Ingress Traffic Signing and Construction Zones Electronic Vehicles Mechanical & Electrical Safety Product Safety & Analysis Machinery - Metal, Wood, Plastic Molding Machine Guarding & Safety, Robots, Automation Hazard and Risk Analysis Employee Safety Procedures – OSHA Electrical Distribution & Transmission Hazards

Warnings & Instructions Warning Labels & User Manual Design Hazard Analysis & Product Label Designs Medical Device & Drug Warnings & Instructions Inadequate Warnings Analysis Standard Compliance (ANSI Z535) Product Recall Information & Strategies Consumers/Household Safety Appliances & Tools Child Furniture, Choking, Playgrounds Swimming Pools & Exercise Equipment Recreation - ATV, Boats, Bicycles, Boards Ladder, Stair, Step and Railing Accidents Slip, Trip, & Fall Accidents CPSC Recall Information & Strategies

Chemicals Safety & Labeling NEW OSHA HAZCOM (2012) & GHS Review MSDS, SDS and Product Label Compliance Toxic Torts - Diacetyl, Asbestos, Benzene, Lead, Carbon Monoxide Vaping & E-Cigarette Health Effects Chemical Exposures & Workplace Safety Chemical Inhalation, Ingestion, Dermal Contact Contamination - Water & Environmental Manufacturing & Process Line Accidents Slips, Trips, Falls, & Entanglements Fires & Explosions Cause & Origin Investigations Gas, Vapor, & Electrical Spontaneous Combustion Vaping & E-cigarette Battery Failures Fire Control & Explosion Issues

Agriculture Tractor & Equipment Accidents Chemical Applications & Exposures Crop Storage & Harvesting Accidents Pesticides Construction Vehicle Visibility Accidents Slip, Trip, & Fall Accidents Power Tool Repetitive & Immediate Injuries Scaffolding - Cranes - Hoisting - Fork Lifts Insurance Subrogation & Forensics Accident Investigations Electrical & Fire Causation Chemical Leakage Damage Defective Equipment Injuries Premise and Process Damages

James M. Miller, PE, PhD – Founder  Dr. Miller is an Emeritus Engineering Professor at the University of Michigan. He has directly served in Washington originating several Federal OSHA safety regulations, and interacts regularly with CPSC regarding safety and product recalls. Dr. Miller often works on projects relating to compliance with occupational safety standards, provides upper management guidance on product design, recall and liability issues, and serves as an expert witness.

Mark R. Lehto, PhD – Co-Founder Dr. Lehto is a Professor of Engineering at Purdue University. He completed his Ph.D. in engineering at the University of Michigan, where he specialized in Human Factors Engineering, in particular Warnings and Labeling. Dr. Lehto specializes in knowledge engineering, warnings and instructions, structuring expert systems, accident modeling, accident statistical analysis, consumer product safety, boating safety, in-field national surveys of product usage, and product information effectiveness.

David R. Clark, PE, PhD – Co-Founder Dr. Clark is an Emeritus Engineering Professor at Kettering University. He was an engineering PhD graduate from the University of Michigan, where he specialized in human factors engineering and system safety analyses. He has a special expertise in electrical fire- and explosion-related accidents, and has extensive experience working for loss control companies, performing over 150 fire origin and cause investigations in the past few years.

Adam M. Olshove, PE, MSE – Engineering Manager Mr. Olshove has over 10 years of experience providing consulting services to industry and the legal profession. He holds an MS in Mechanical Engineering with a focus on control systems and battery modeling (2019), and a BS in Mechanical Engineering (2012), both from the University of Michigan. He has performed dozens of on-site investigations nationwide in relation to consumer product design and industrial accidents, including failure analysis and testing.

Jeffrey D. Rupp, MSE – Engineering Associate Mr. Rupp has a BS in mechanical engineering from the University of Michigan and a MS in systems engineering and engineering management from Wayne State University. Among his company affiliates is 26 years with Ford Motor Company and Volvo Car Corporation, where he was involved in crash development and crash sensing calibrations.

Peter Howell, PE, CSP, CFEI, FAIChE, has almost 50 years of experience in the Design, Operation, Maintenance and Management of Chemical and Petrochemical Facilities with positions such as process engineer, project engineer, maintenance foreman, technical manager, engineering manager, plant manager and vice president and general manager.

Mr. Howell has investigated approximately 125 incidents that occurred in chemical plants, refineries, pulp and paper mills and similar industries for attorneys, insurance companies and regulatory agencies. He has determined the root causes using methodologies consistent with NFPA 921, Center for Chemical Process Safety, United Steel Workers, and the National Safety Council.  The root causes determined were based on the evidence, Recognized and Generally Accepted Good Engineering Practices and federal regulations.

Mr. Howell has extensive experience in developing, implementing and auditing the elements of OSHA's process safety management (PSM) regulation and EPA's risk management plan (RMP). He also has extensive experience in accident and incident investigations involving fire, explosion, and release of toxic and hazardous materials.  He frequently serves as an expert witness and provides litigation support.

Areas of Expertise:

OSHA Compliance Safety Performance Improvement Incident Investigation Recognized and Generally Accepted Good Engineering Practices (RAGAGEP) OSHA PSM Regulation

EPA RMP Regulation Process Hazards Analysis Design, Operation Maintenance and Management of Chemical and Refinery Equipment and Facilities

Following a career in the public and private sectors, Catherine Adams Hutt, PhD, RD, CFS, launched a consulting career and is currently President and CEO of RdR Solutions Consulting. With vast experience in her field, she provides advice and guidance on a wide range of topics, including:

Regulatory Compliance Food Safety Quality Systems Management Supply Chain

Health and Wellness Business Strategy Product Development Software Solutions for Product Development Processes

Dr. Adams Hutt also partners with Elizabeth Sloan and Sloan Trends to create business strategy advice for Fortune 500 businesses in the Food and Dietary Supplement categories. Sloan Trends examines consumer trends using unique predictive tools to identify emerging mega markets. They help businesses better understand the market and differentiate long-term business opportunities from short-term trends. Dr. Adams Hutt compliments the trend analysis with in-depth investigations of the science behind the issues and regulatory considerations.

A Registered Dietitian and Certified Food Scientist, Dr. Adams Hutt was formerly Chief Quality, Food Safety, and Nutrition Officer for McDonald’s Corporation and led Supplier and Restaurant Food Safety teams for YUM! Brands. She was Chief Quality Officer for Coors Brewing Company, led the North America Quality team at H.J. Heinz, and developed next generation Quality programs for the Campbell Soup Company. Dr. Adams Hutt was Assistant Administrator for the US Department of Agriculture’s Food Safety and Inspection Service (FSIS) where she led the development of HACCP as a regulatory tool. She has been an active participant in international programs, and led the U.S Delegation for the Codex Food Hygiene Committee.

Texas Office 4568 Elm Bottom Circle Aubrey, TX 76227

Virginia Office 124 South Fairfax Alexandria, VA 22314

View Dr. Adams Hutt's Expert Witness Profile.

George Schiro is a DNA Technical Leader - Forensic Scientist. His duties include incorporating the DNA Advisory Board (DAB) standards, accountability for the technical operations of the lab, conducting DNA analysis using the 13 STR core loci and Y STR in casework, DNA research, forensic science training and crime scene investigation.

Mr. Schiro has worked over 3500 cases and has qualified as an expert over 175 times in 31 Louisiana parish courts, Arkansas, California, Florida, Mississippi, Missouri, Nevada, New York, Texas, West Virginia, federal court, U.S. court-martial, and two Louisiana city courts. Has also consulted on cases in 29 states.

Qualified as an Expert in the Following Areas:

Latent Fingerprint Development Serology Crime Scene Investigation Forensic Science Trajectory Reconstruction Shoeprint Identification

Crime Scene Reconstruction Bloodstain Pattern Analysis DNA Analysis Fracture Match Analysis Hair Comparison Forensic Science Training