12/14/2022· Construction
Design-Bid-Build, Design-Build Or Construction Management? Circa 2022
By: Sanford C. Loy
Any of these methods can produce beneficial results…but the decision as to which one is used must be made carefully with a full understanding of the pluses and minuses of each; each owner’s circumstances, risk tolerance, staffing, experience with construction, the degree to which the schedule and budget are respectively critical as well a
6/24/2015· Design
Retail Design & Display: Chain Store Personal Injury
By: Jerry Birnbach
I have been retained by a law firm as an expert witness in the field of Retail Design and Display. I was asked to review a furniture retail Store located in the above referenced address. It does need to be noted that I was not able to review the actual piece of furniture in question nor the camel statue that fell off of the chest and onto the plaintiff.
6/4/2015· Design
Personal Injury: Pay More Attention To The Chairs
By: Leonard Backer
Basic but very important points which could help minimize owners' liability and financial exposure to accident and personal injury claims on their premises.
7/14/2009· Human Factors
A standard can be defined as a document issued by a recognized agency, and dealing with design and/or safety requirements relating to a specific product or type of activity. Such agencies include the U.S. Occupational Safety and Health Administration (051-IA) and the American National Standards Institute (ANSI). OSHA standards are generally legally binding for an employer, while ANSI standards are generally of an advisory nature. The term "industry standard," however, is ordinarily taken to have a broader meaning, including formal standards as just defined, and also including designs and procedures not required in formal standards, though prevailing in a specific industry, and which represent generally accepted custom and practice.
7/7/2009· Design
White Paper: Reverse Engineering
By: Dr. Thomas Read
Before expending the effort necessary to reverse engineer a device or object, it must be definite that the object under study is not covered by one or more patents. This avoids a dispute over patent violations. Once it has been established that no patent coverage exists, one can use multiple techniques to reverse engineer a product. These are summarized below:
7/18/2007· Design
By: Margo Berman
Inexperienced creative ad majors often make the same types of mistakes in their layouts. These errors demonstrate a lack of awareness of the basic components of ad design. First, they do not have an understanding of overall composition. Second, they have a weak comprehension of the correct use and application of typography
9/21/2004· Failure Analysis
Contemporary Skin Barrier Wall Design And Water Leakage
For hundreds of years, building walls were constructed of stone or brick and were sometimes several feet thick. Such massive walls served well not only to sup port the floors and roof but also to keep out the weather
by Matthew Curtin, Peter G. Neumann
by Alan M. Perlman, PhD
by Kirby Beck (co-author & contributor)
